ọdịnaya zoo
1 Nnwale nyocha SCS CTE701 maka nyocha na-aga n'ihu
2 Nkọwa
3 Nkwakọ ngwaahịa
4 Atụmatụ na akụrụngwa
5 Nwụnye
6 Ọrụ
7 WS Aware Monitor
8 Ground Master Monitor
9 Ground Man Plus Workstation Monitor
10 Nlekọta
11 Nkọwapụta
12 Akwụkwọ ikike
13 Akwụkwọ / akụrụngwa
13.1 Ntụaka
14 Ozi ndị metụtara

SCS-akara ngosi

Nnwale nyocha SCS CTE701 maka nyocha na-aga n'ihu

SCS-CTE701-Nnwale-Nnwale maka ngwaahịa-na-aga n'ihu-nyochaa.

Nkọwa

A na-eji ihe nleba anya nke SCS CTE701 mee nyocha njedebe ule oge nke SCS WS Aware Monitor, Ground Master Monitor, Iron Man® Plus Monitor, na Ground Man Plus Monitor. Enwere ike mezuo nkwenye na-ewepụghị ihe nleba anya na ebe ọrụ ya. Onye nyocha nkwenye bụ National Institute of Standards and Technology (NIST) nwere ike ịchọta. Ugboro nke nkwenye dabere na ọdịdị dị oke egwu nke ihe ndị nwere ike ime ka ESD na-edozi. SCS na-akwado nhazi nhazi kwa afọ nke ndị nlekota ebe ọrụ na CTE701 Verification Tester. Onye nyocha nkwenye CTE701 zutere ANSI/ESD S20.20 na nkwenye nnabata ESD TR53.

Enwere ike iji ihe nnwale nyocha SCS CTE701 jiri ihe ndị a:

Ihe Nkọwa
770067 WS Aware Monitor
770068 WS Aware Monitor
CTC061-3-242-WW WS Aware Monitor
CTC061-RT-242-WW WS Aware Monitor
CTC062-RT-242-WW WS Aware Monitor
770044 Ground Master Monitor
CTC331-WW Ihe nleba anya Iron Man® Plus
CTC334-WW Ground Man Plus Monitor
CTC337-WW Eriri aka na ala nlekota
773 Eriri aka na ala nlekota

Nkwakọ ngwaahịa

  • 1 CTE701 Nyocha nyocha
  • 1 Black Alligator-to-Banana Ule ule, 3 ft.
  • 1 Red Mini Grabber-to-Banana Test Lead, 3 ft.
  • 1 Black 3.5 mm Mono USB, 2 ft.
  • 1 9V batrị alkaline
  • 1 Asambodo nhazi nhazi

Atụmatụ na akụrụngwa

SCS-CTE701-Nnwale-Nnwale-maka-Na-aga n'ihu-nlebaanya-fig- (1)

  • A. Onye na-arụ ọrụ Dual-wire Jack: Jikọọ otu njedebe nke eriri mono 3.5 mm gụnyere ebe a, yana njedebe nke ọzọ n'ime jakị onye ọrụ nyocha.
  • B. Soft/Metal Ground Banana Jack: Jikọọ ọnụ nkwụnye banana nke ụzọ ule uhie ebe a, na njedebe nke ọzọ na ihe nleba anya ma ọ bụ sekit ala ngwaọrụ.
  • C. Ntụaka Ground Banana Jack: Jikọọ ọnụ banana plọg nke ụzọ ule ojii ebe a, na njedebe nke ọzọ na ala akụrụngwa.
  • D. Nnukwu ahụ Voltage Ngbanwe Ule: Na-eme ka BODY VOLTAGE KWURU ọnọdụ na sekit onye na-ahụ maka ihe nleba anya mgbe ịpịrị ya.
  • E. Obere Isi Voltage Mgbanwe Ule dị ala: Na-eme ka aru VOLTAGỌnọdụ E PASS na sekit onye na-ahụ maka ihe nleba anya mgbe ịpịrị ya.
  • F. Mgbanwe Nleba Nleba Dị nro: Na-eme ka ọnọdụ MAT PASS dị na nleba anya mgbe ịpịrị ya.
  • G. Mgbanwe Ule Ule Aka: Na-eme ka ọnọdụ OPERATOR PASS dị na nleba anya mgbe ịpịrị ya.
  • H. Nleta oke ule DIP: Na-ahazi oke ule na nyocha nkwenye CTE701.
  • I. Mgbanwe Nleba Nleba Metal Ground: Na-eme ka ọnọdụ TOOL FAIL dị na nleba anya mgbe ịpịrị ya.
  • J. Ngbanwe ule EMI dị elu: Na-eme ka ọnọdụ EMI FAIL dị na sekit ngwaọrụ ihe nleba anya mgbe ịpịrị ya.
  • K. Mgbanwe ule EMI dị ala: Na-eme ka ọnọdụ EMI PASS dị na sekit ngwaọrụ ihe nleba anya mgbe ịpịrị ya.
  • L. Mgbanwe Nleba Nleba Metal dị ala: Na-eme ka ọnọdụ TOOL PASS dị na nleba anya mgbe ịpịrị ya.
  • M. Ikanam batrị dị ala: Na-enye ọkụ mgbe achọrọ ka edochie batrị.
  • N. Ọkụ ọkụ: Na-enwu mgbe agbanyere Nnwale nyocha CTE701.
  • O. Mgbanwe ọkụ: Gaa n'aka ekpe iji mee ka onye nyocha nkwenye gbanyụọ. Gaa n'aka nri iji mee ka Onye Nnwale nyocha ON.

Nwụnye

A na-eji mgba ọkụ ọnọdụ 701 DIP nke CTE10 iji hazie oke ule ya maka ala dị nro, ala igwe, EMI, na onye ọrụ.

Ala dị nro
A na-ahazi nguzogide ala dị nro na switches 1-4. Ịpị bọtịnụ ngwa ngwa SOFT GROUND ga-ebute ibu nwere nguzogide dị ntakịrị karịa oke ule.

 

Oke ule

   Gbanwee  
1 2 3 4
1 gigọm Gbanyụọ Gbanyụọ Gbanyụọ ON
400 megohm Gbanyụọ Gbanyụọ ON ON
100 megohm Gbanyụọ ON ON ON
10 megohm ON ON ON ON

Ala Metal
A na-ahazi impedance n'ala metal na switches 5-8. Ịpị bọtịnụ HIGH METAL GROUND push ga-ebu 1 ohm dị elu karịa oke ule ahaziri. Ịpị bọtịnụ PASS METAL GROUND push bọtịnụ ga-ebu 1 ohm erughị oke ule. Maka exampYabụ, ọ bụrụ na edobere nleba anya nke a ga-enyocha ka ọ bụrụ 10 ohms, onye nyocha nke nyocha ga-achọpụta na ọ gafere na 9 ohms wee daa na 11 ohms.

 

Oke ule

   Gbanwee  
5 6 7 8
1 ohm ON ON ON ON
2 ohm Gbanyụọ ON ON ON
3 ohm ON Gbanyụọ ON ON
4 ohm Gbanyụọ Gbanyụọ ON ON
5 ohm ON ON Gbanyụọ ON
6 ohm Gbanyụọ ON Gbanyụọ ON
7 ohm ON Gbanyụọ Gbanyụọ ON
8 ohm Gbanyụọ Gbanyụọ Gbanyụọ ON
9 ohm ON ON ON Gbanyụọ
10 ohm Gbanyụọ ON ON Gbanyụọ
11 ohm ON Gbanyụọ ON Gbanyụọ
12 ohm Gbanyụọ Gbanyụọ ON Gbanyụọ
13 ohm ON ON Gbanyụọ Gbanyụọ
14 ohm Gbanyụọ ON Gbanyụọ Gbanyụọ
15 ohm ON Gbanyụọ Gbanyụọ Gbanyụọ
16 ohm Gbanyụọ Gbanyụọ Gbanyụọ Gbanyụọ

EMI
A na-ahazi akara ngosi dị elu nke EMI na mgba ọkụ 9. Nnwale nyocha nke CTE701 na-enye ọkwa abụọ dị iche iche nke mgbaàmà ugboro ugboro: elu na nkịtị. Ịpị bọtịnụ HIGH EMI ga-ebu ọkwa mgbama dị elu n'ime oke ya. Ịpị bọtịnụ ntanye LOW EMI ga-ebunye mgbaama dị ala n'ime oke ya.

 

Ọkwa mgbaàmà

 Gbanwee
9
Eluola ON
Nkịtị Gbanyụọ

Eriri aka
A na-ahazi nkwụsi ike nke eriri aka na mgba ọkụ 10. Nnwale nyocha nke CTE701 na-enye nguzogide ụfọdụ uru n'ofe ntinye ọnụ eriri aka iji mee ka eriri nkwojiaka. Igwe nkwojiaka abụọ nwere ezigbo mma nwere ihe mgbochi megohm 1 n'ime ndị na-eduzi ya. Emebere ihe nnwale nkwenye ka ọ were were na enweghị ihe mgbochi. Ntọala 12 megohms na-eme ka eriri nkwojiaka nwere ihe mgbochi megohm abụọ n'usoro.

 

Oke ule

 Gbanwee
10
12 megohm Gbanyụọ
10 megohm ON

Ọrụ

Ihe nleba anya ebe ọrụ Iron Man Plus
Ịhazi Nnwale Nnwale Nnwale Hazie ngbanwe DIP nke nyocha na ntọala egosiri n'okpuru. Nke a ga-eme ka oke ule ya dabara na njedebe ndabara nke ụlọ ọrụ nyocha.

N'ịKWESỊRỊTA ONYE ỌRỤSCS-CTE701-Nnwale-Nnwale-maka-Na-aga n'ihu-nlebaanya-fig- (2)

  1. Jiri ụzọ nnwale ojii jikọọ ihe nnwale nyocha na ala akụrụngwa.
  2. Kwado Onye Nnwale Nnwale ON.
  3. Jiri eriri mono 3.5 mm jikọọ ihe Nnwale nyocha na jakị onye na-ahụ maka ihe nleba anya. LED onye na-ahụ maka ihe nleba anya ga-enwu na-acha uhie uhie, mkpu ya ga-adakwa ụda.SCS-CTE701-Nnwale-Nnwale-maka-Na-aga n'ihu-nlebaanya-fig- (3)
    Ijikọ ihe nnwale nyocha na jack onye ọrụ Iron Man Plus Workstation Monitor
  4. Pịa ma jide ngbanwe ule nyocha WRIST STRAP. LED onye na-ahụ maka ihe nleba anya ga-enwupụta akwụkwọ ndụ akwụkwọ ndụ, ma mkpu ga-akwụsị. Nke a na-enyocha oke impedance nke sekit onye ọrụ.SCS-CTE701-Nnwale-Nnwale-maka-Na-aga n'ihu-nlebaanya-fig- (4)
  5. Gaa n'ihu na ịpị ma jide ngbanwe ule nyocha WRIST STRAP. N'otu oge ahụ, pịa ma jide Nnwale nyocha nke LOW BODY VOLTAGE ule mgba ọkụ. LED onye na-ahụ maka ihe nleba anya ga-anọgide na-acha akwụkwọ ndụ akwụkwọ ndụ, ọ nweghịkwa mkpu ga-ada. Nke a na-achọpụta sekit dị ala nke onye ọrụ voltage ịgba.SCS-CTE701-Nnwale-Nnwale-maka-Na-aga n'ihu-nlebaanya-fig- (5)
  6. Gaa n'ihu na ịpị ma jide ngbanwe ule nyocha WRIST STRAP. N'otu oge, pịa ma jide Nnwale Nnwale HIGH BODY VOLTAGE ule mgba ọkụ. LED onye na-ahụ maka akwụkwọ ndụ akwụkwọ ndụ nke onye nleba anya ga-enwu ọkụ mgbe niile, LED ya na-acha uhie uhie ga-enwu, na mkpu ga-ada ụda. Nke a na-enyocha oke ahụ nke onye ọrụ sekit voltage ịgba.SCS-CTE701-Nnwale-Nnwale-maka-Na-aga n'ihu-nlebaanya-fig- (6)
  7. Kwụpụ eriri mono na ihe nleba anya.
    N'ịkwado gburugburu ute CIRCUIT
  8. Jikọọ ụzọ ule uhie na jakị banana na-acha uhie uhie dị n'elu nke Nnwale Nnwale.
  9. Kwụpụ eriri ihe nleba anya na-acha ọcha nke onye nlebanya na ute ihu ọrụ ya wee tụgharịa ka ikpughe ọnyà mm 10 ya.
  10. Kpee obere grabber ụzọ ule ọbara ọbara ka ọ bụrụ 10 mm snap na eriri ihe nleba anya ọcha.SCS-CTE701-Nnwale-Nnwale-maka-Na-aga n'ihu-nlebaanya-fig- (7)
  11. Chere ihe dị ka sekọn 5 maka ihe nleba anya LED ka ọ na-enwu na-acha uhie uhie ma na-ada mkpu a na-anụ ya.
  12. Pịa ma jide Nnwale nyocha nke SOFT GROUND mgba ọkụ. Igwe ọkụ ihe nleba anya ga-enwu na-acha akwụkwọ ndụ akwụkwọ ndụ, na mkpu a na-anụ ya ga-akwụsị mgbe ihe dị ka sekọnd 3 gachara. Nke a na-enyocha oke nguzogide sekit mat.SCS-CTE701-Nnwale-Nnwale-maka-Na-aga n'ihu-nlebaanya-fig- (8)
  13. Kwụpụ ụzọ ule uhie na eriri ihe nleba anya ọcha nke ihe nleba anya.
  14. Tinyegharịa eriri ihe nleba anya ute ọcha na ute ihu igwe.
    NA-enyocha okirikiri igwe
    Mara: A ghaghị iji ọkụ ọkụ DC na-agbanwe agbanwe iji mezue usoro a. Ihe nnwale nyocha nke CTE701 enweghị ike ịchọpụta sekit ígwè na Iron Man® Plus Workstation Monitor.
  15. Tụgharịa voltage trimpot oti mkpu na azụ nke ileba anya n'akụkụ elekere zuru oke. Nke a na-ahazi ya ka ọ bụrụ ± 5 V.
  16. Kwado ọkụ ọkụ DC agbanwe agbanwe. Hazie ya ka ọ bụrụ 5.0 V.
  17. Jikọọ ọnụ na-adịghị mma site na ọkụ ọkụ DC na-agbanwe na ala. Jikọọ ọnụ ọnụ ya dị mma na eriri odo odo jikọtara na ọnụ BOARD ihe nleba anya. Igwe ọkụ Iron nke onye nleba anya kwesịrị inye ọkụ na-acha uhie uhie na mkpu ga-ada ụda.
  18. Tọọ ike ọkọnọ DC na-agbanwe agbanwe na 4.0 V. Igwe ọkụ Iron nke onye nleba anya kwesịrị inye ọkụ na-acha akwụkwọ ndụ akwụkwọ ndụ na mkpu egwu ya kwesịrị ịkwụsị.
  19. Kwụpụ ọkụ ọkụ DC na-agbanwe agbanwe site na nyocha na ala. Jikọọ ọnụ ya dị mma na ala yana ọdụ adịghị mma ya na eriri odo odo nke ihe nleba anya.
  20. Nyochaa na ike ọkọnọ DC na-agbanwe agbanwe ka atọrọ ka ọ bụrụ 4.0 V. Igwe ọkụ igwe ihe nleba anya kwesịrị inye ọkụ na-acha akwụkwọ ndụ akwụkwọ ndụ.
  21. Tọọ ike ọkọnọ DC na-agbanwe agbanwe na 5.0 V. Igwe ọkụ Iron nke onye nleba anya kwesịrị inye ọkụ na-acha uhie uhie na mkpu a na-anụ ya kwesịrị ịda ụda.

WS Aware Monitor

Ịhazi ONYE Nnwale Nnwale
Hazie ngbanwe DIP nke nyocha nkwenye ka ọ bụrụ ntọala egosiri n'okpuru. Nke a ga-eme ka oke ule ya dabara na njedebe ndabara nke ụlọ ọrụ nyocha.SCS-CTE701-Nnwale-Nnwale-maka-Na-aga n'ihu-nlebaanya-fig- (9)

N'ịKWESỊRỊTA ONYE ỌRỤ

  1. Jiri ụzọ nnwale ojii jikọọ Onye Nnwale Nnwale na ala akụrụngwa.
  2. Kwado Onye Nnwale Nnwale ON.
  3. Jiri eriri mono 3.5 mm jikọọ ihe Nnwale nyocha na jakị onye na-ahụ maka ihe nleba anya. LED onye na-ahụ maka ihe nleba anya ga-enwu na-acha uhie uhie, mkpu ya ga-adakwa ụda.SCS-CTE701-Nnwale-Nnwale-maka-Na-aga n'ihu-nlebaanya-fig- (10)
  4. Pịa ma jide ngbanwe ule nyocha WRIST STRAP. LED onye na-ahụ maka ihe nleba anya ga-enwupụta akwụkwọ ndụ akwụkwọ ndụ, ma mkpu ga-akwụsị. Nke a na-enyocha oke impedance nke sekit onye ọrụ.SCS-CTE701-Nnwale-Nnwale-maka-Na-aga n'ihu-nlebaanya-fig- (11)
  5. Gaa n'ihu na ịpị ma jide ngbanwe ule nyocha WRIST STRAP. N'otu oge ahụ, pịa ma jide Nnwale nyocha nke LOW BODY VOLTAGE ule mgba ọkụ. LED onye na-ahụ maka ihe nleba anya ga-anọgide na-acha akwụkwọ ndụ akwụkwọ ndụ, ọ nweghịkwa mkpu ga-ada. Nke a na-achọpụta sekit dị ala nke onye ọrụ voltage ịgba.SCS-CTE701-Nnwale-Nnwale-maka-Na-aga n'ihu-nlebaanya-fig- (12)
  6. Gaa n'ihu na ịpị ma jide ngbanwe ule nyocha WRIST STRAP. N'otu oge, pịa ma jide Nnwale Nnwale HIGH BODY VOLTAGE ule mgba ọkụ. Onye na-ahụ maka akwụkwọ ndụ akwụkwọ ndụ nke onye nleba anya LED ga-enwu ọkụ mgbe niile, LED ya na-acha uhie uhie ga-enwu. Nke a na-enyocha oke ahụ nke onye ọrụ sekit voltage ịgba.SCS-CTE701-Nnwale-Nnwale-maka-Na-aga n'ihu-nlebaanya-fig- (13)
  7. Kwụpụ eriri mono na ihe nleba anya.
    N'ịkwado gburugburu ute CIRCUIT
  8. Jikọọ ụzọ ule uhie na jakị banana na-acha uhie uhie dị n'elu nke Nnwale Nnwale.
  9. Kwụpụ eriri ihe nleba anya na-acha ọcha nke onye nlebanya na ute ihu ọrụ ya wee tụgharịa ka ikpughe ọnyà mm 10 ya.
  10. Kpee obere grabber ụzọ ule ọbara ọbara ka ọ bụrụ 10 mm snap na eriri ihe nleba anya ọcha.SCS-CTE701-Nnwale-Nnwale-maka-Na-aga n'ihu-nlebaanya-fig- (14)
  11. Chere ihe dị ka sekọn 5 maka ihe nleba anya LED ka ọ na-enwu na-acha uhie uhie ma na-ada mkpu a na-anụ ya.
  12. Pịa ma jide Nnwale nyocha nke SOFT GROUND mgba ọkụ. Igwe ọkụ ihe nleba anya ga-enwu na-acha akwụkwọ ndụ akwụkwọ ndụ, na mkpu a na-anụ ya ga-akwụsị mgbe ihe dị ka sekọnd 3 gachara. Nke a na-enyocha oke nguzogide sekit mat.SCS-CTE701-Nnwale-Nnwale-maka-Na-aga n'ihu-nlebaanya-fig- (15)
  13. Kwụpụ ụzọ ule uhie na eriri ihe nleba anya ọcha nke ihe nleba anya.
  14. Tinyegharịa eriri ihe nleba anya ute ọcha na ute ihu igwe.
    N'ịkwado gburugburu ngwaọrụ
  15. Kwupu eriri ngwaọrụ ihe nleba anya na ngwa igwe ya.
  16. Kpoo obere grabber ụzọ ule uhie na eriri ngwaọrụ.SCS-CTE701-Nnwale-Nnwale-maka-Na-aga n'ihu-nlebaanya-fig- (16)
  17. Chere maka ngwaọrụ ihe nleba anya LED ka ọ na-enwu na-acha uhie uhie ma na-ada mkpu a na-anụ ya.
  18. Pịa ma jide Nnwale nyocha nke METAL GROUND PASS mgba ọkụ. Igwe ọkụ nke onye nleba anya LED ga-enwu gbaa akwụkwọ ndụ akwụkwọ ndụ, na mkpu a na-anụ ya ga-akwụsị. Nke a na-enyocha oke impedance sekit ngwaọrụ.SCS-CTE701-Nnwale-Nnwale-maka-Na-aga n'ihu-nlebaanya-fig- (17)
  19. Pịa ma jide Nnwale nyocha nke METAL GROUND FAIL mgba ọkụ. Igwe ọkụ nke onye nleba anya ga-enwu na-acha uhie uhie, na mkpu a na-anụ ya ga-ada ụda. Nke a na-enyocha oke impedance sekit ngwaọrụ.SCS-CTE701-Nnwale-Nnwale-maka-Na-aga n'ihu-nlebaanya-fig- (18)
  20. Pịa ma jide Nnwale nyocha nke METAL GROUND PASS mgba ọkụ. N'otu oge, pịa ma jide Nnwale nyocha nke EMI LOW mgba ọkụ. Ihe nleba anya LED ga-anọgide na-acha akwụkwọ ndụ akwụkwọ ndụ, ọ nweghịkwa mkpu ga-ada ụda. Nke a na-achọpụta sekit onye ọrụ dị ala EMI voltage ịgba.SCS-CTE701-Nnwale-Nnwale-maka-Na-aga n'ihu-nlebaanya-fig- (19)
  21. Pịa ma jide Nnwale nyocha nke METAL GROUND PASS mgba ọkụ. N'otu oge, pịa ma jide Nnwale nyocha EMI HIGH mgba ọkụ. Igwe ọkụ nke onye nleba anya LED ga-enwu na-acha ọbara ọbara, na mkpu a na-anụ ya ga-ada ụda. Nke a na-enyocha sekit onye ọrụ dị elu EMI voltage ịgba.SCS-CTE701-Nnwale-Nnwale-maka-Na-aga n'ihu-nlebaanya-fig- (20)
  22. Kwupu ụzọ nnwale uhie na eriri ngwaọrụ ihe nleba anya.
  23. Tinyegharịa eriri ngwá ọrụ na ngwá ọrụ igwe.

Ground Master Monitor

Ịhazi ONYE Nnwale Nnwale
Hazie ngbanwe DIP nke nyocha nkwenye ka ọ bụrụ ntọala egosiri n'okpuru. Nke a ga-eme ka oke ule ya dabara na njedebe ndabara nke ụlọ ọrụ nyocha.SCS-CTE701-Nnwale-Nnwale-maka-Na-aga n'ihu-nlebaanya-fig- (21)

N'ịkwado gburugburu ngwaọrụ

  1. Kwupu eriri ngwaọrụ ihe nleba anya na ngwa igwe ya.
  2. Kpoo obere grabber ụzọ ule uhie na eriri ngwaọrụ.SCS-CTE701-Nnwale-Nnwale-maka-Na-aga n'ihu-nlebaanya-fig- (22)
  3. Chere maka ngwaọrụ ihe nleba anya LED ka ọ na-enwu na-acha uhie uhie ma na-ada mkpu a na-anụ ya.
  4. Pịa ma jide Nnwale nyocha nke METAL GROUND PASS mgba ọkụ. Igwe ọkụ nke onye nleba anya LED ga-enwu gbaa akwụkwọ ndụ akwụkwọ ndụ, na mkpu a na-anụ ya ga-akwụsị. Nke a na-enyocha oke impedance sekit ngwaọrụ.SCS-CTE701-Nnwale-Nnwale-maka-Na-aga n'ihu-nlebaanya-fig- (23)
  5. Pịa ma jide Nnwale nyocha nke METAL GROUND FAIL mgba ọkụ. Igwe ọkụ nke onye nleba anya ga-enwu na-acha uhie uhie, na mkpu a na-anụ ya ga-ada ụda. Nke a na-enyocha oke impedance sekit ngwaọrụ.SCS-CTE701-Nnwale-Nnwale-maka-Na-aga n'ihu-nlebaanya-fig- (24)
  6. Pịa ma jide Nnwale nyocha nke METAL GROUND PASS mgba ọkụ. N'otu oge, pịa ma jide Nnwale nyocha nke EMI LOW mgba ọkụ. Ihe nleba anya LED ga-anọgide na-acha akwụkwọ ndụ akwụkwọ ndụ, ọ nweghịkwa mkpu ga-ada ụda. Nke a na-achọpụta sekit onye ọrụ dị ala EMI voltage ịgba.SCS-CTE701-Nnwale-Nnwale-maka-Na-aga n'ihu-nlebaanya-fig- (25)
  7. Pịa ma jide Nnwale nyocha nke METAL GROUND PASS mgba ọkụ. N'otu oge, pịa ma jide Nnwale nyocha EMI HIGH mgba ọkụ. Igwe ọkụ nke onye nleba anya LED ga-enwu na-acha ọbara ọbara, na mkpu a na-anụ ya ga-ada ụda. Nke a na-enyocha sekit onye ọrụ dị elu EMI voltage ịgba.SCS-CTE701-Nnwale-Nnwale-maka-Na-aga n'ihu-nlebaanya-fig- (26)
  8. Kwupu ụzọ nnwale uhie na eriri ngwaọrụ ihe nleba anya.
  9. Tinyegharịa eriri ngwá ọrụ na ngwá ọrụ igwe.

Ground Man Plus Workstation Monitor

Ịhazi ONYE Nnwale Nnwale
Hazie ngbanwe DIP nke nyocha nkwenye ka ọ bụrụ ntọala egosiri n'okpuru. Nke a ga-eme ka oke ule ya dabara na njedebe ndabara nke ụlọ ọrụ nyocha.SCS-CTE701-Nnwale-Nnwale-maka-Na-aga n'ihu-nlebaanya-fig- (27)

N'ịKWESỊRỊTA ONYE ỌRỤ

  1. Jiri ụzọ nnwale ojii jikọọ Onye Nnwale Nnwale na ala akụrụngwa.
  2. Kwado Onye Nnwale Nnwale ON.
  3. Jiri eriri mono 3.5 mm jikọọ ihe Nnwale nyocha na jakị onye na-ahụ maka ihe nleba anya. LED onye na-ahụ maka ihe nleba anya ga-enwu na-acha uhie uhie, mkpu ya ga-adakwa ụda.SCS-CTE701-Nnwale-Nnwale-maka-Na-aga n'ihu-nlebaanya-fig- (28)
  4. Pịa ma jide ngbanwe ule nyocha WRIST STRAP. LED onye na-ahụ maka ihe nleba anya ga-enwupụta akwụkwọ ndụ akwụkwọ ndụ, ma mkpu ga-akwụsị. Nke a na-enyocha oke impedance nke sekit onye ọrụ.SCS-CTE701-Nnwale-Nnwale-maka-Na-aga n'ihu-nlebaanya-fig- (29)
  5. Gaa n'ihu na ịpị ma jide ngbanwe ule nyocha WRIST STRAP. N'otu oge ahụ, pịa ma jide Nnwale nyocha nke LOW BODY VOLTAGE ule mgba ọkụ. LED onye na-ahụ maka ihe nleba anya ga-anọgide na-acha akwụkwọ ndụ akwụkwọ ndụ, ọ nweghịkwa mkpu ga-ada. Nke a na-achọpụta sekit dị ala nke onye ọrụ voltage ịgba.SCS-CTE701-Nnwale-Nnwale-maka-Na-aga n'ihu-nlebaanya-fig- (30)
  6. Gaa n'ihu na ịpị ma jide ngbanwe ule nyocha WRIST STRAP. N'otu oge, pịa ma jide Nnwale Nnwale HIGH BODY VOLTAGE ule mgba ọkụ. LED onye na-ahụ maka akwụkwọ ndụ akwụkwọ ndụ nke onye nleba anya ga-enwu ọkụ mgbe niile, LED ya na-acha uhie uhie ga-enwu, na mkpu ga-ada ụda. Nke a na-enyocha oke ahụ nke onye ọrụ sekit voltage ịgba.SCS-CTE701-Nnwale-Nnwale-maka-Na-aga n'ihu-nlebaanya-fig- (31)
  7. Kwụpụ eriri mono na ihe nleba anya.
    N'ịkwado gburugburu ngwaọrụ
  8. Kwupu eriri ngwaọrụ ihe nleba anya na ngwa igwe ya.
  9. Kpoo obere grabber ụzọ ule uhie na eriri ngwaọrụ.SCS-CTE701-Nnwale-Nnwale-maka-Na-aga n'ihu-nlebaanya-fig- (32)
  10. Chere maka ngwaọrụ ihe nleba anya LED ka ọ na-enwu na-acha uhie uhie ma na-ada mkpu a na-anụ ya.
  11. Pịa ma jide Nnwale nyocha nke METAL GROUND PASS mgba ọkụ. Igwe ọkụ nke onye nleba anya LED ga-enwu gbaa akwụkwọ ndụ akwụkwọ ndụ, na mkpu a na-anụ ya ga-akwụsị. Nke a na-enyocha oke impedance sekit ngwaọrụ.SCS-CTE701-Nnwale-Nnwale-maka-Na-aga n'ihu-nlebaanya-fig- (33)
  12. Pịa ma jide Nnwale nyocha nke METAL GROUND FAIL mgba ọkụ. Igwe ọkụ nke onye nleba anya ga-enwu na-acha uhie uhie, na mkpu a na-anụ ya ga-ada ụda. Nke a na-enyocha oke impedance sekit ngwaọrụ.SCS-CTE701-Nnwale-Nnwale-maka-Na-aga n'ihu-nlebaanya-fig- (34)
  13. Pịa ma jide Nnwale nyocha nke METAL GROUND PASS mgba ọkụ. N'otu oge, pịa ma jide Nnwale nyocha nke EMI LOW mgba ọkụ. Ihe nleba anya LED ga-anọgide na-acha akwụkwọ ndụ akwụkwọ ndụ, ọ nweghịkwa mkpu ga-ada ụda. Nke a na-achọpụta sekit onye ọrụ dị ala EMI voltage ịgba.SCS-CTE701-Nnwale-Nnwale-maka-Na-aga n'ihu-nlebaanya-fig- (35)
  14. Pịa ma jide Nnwale nyocha nke METAL GROUND PASS mgba ọkụ. N'otu oge, pịa ma jide Nnwale nyocha EMI HIGH mgba ọkụ. Igwe ọkụ nke onye nleba anya LED ga-enwu na-acha ọbara ọbara, na mkpu a na-anụ ya ga-ada ụda. Nke a na-enyocha sekit onye ọrụ dị elu EMI voltage ịgba.SCS-CTE701-Nnwale-Nnwale-maka-Na-aga n'ihu-nlebaanya-fig- (36)
  15. Kwupu ụzọ nnwale uhie na eriri ngwaọrụ ihe nleba anya.
  16. Tinyegharịa eriri ngwá ọrụ na ngwá ọrụ igwe.

Nlekọta

Ngbanwe batrị
Dochie batrị ozugbo LED Batrị dị ala na-enwu na-acha uhie uhie. Mepee oghere dị n'azụ ihe nleba anya iji dochie batrị ahụ. Onye nyocha na-eji otu batrị alkaline 9V. Gbaa mbọ hụ na oghere batrị ahụ dabara nke ọma ka ịzenarị mmebi sekit enwere ike.

Nkọwapụta

 Okpomọkụ na-arụ ọrụ 50 ruo 95°F (10 ruo 35°C)
Ihe ndị chọrọ gburugburu ebe obibi Eji ime ụlọ naanị n'ogo na-erughị 6500 ft. (2 km)

Oke iru mmiri dị 80% ruo 85°F (30°C) na-agbada n'ahịrị ruo 50% @ 85°F (30°C)
Akụkụ 4.9″ L x 2.8″ W x 1.3″ H (124 mm x 71 mm x 33 mm)
Ibu 0.2 n'arọ. (Kilogram 0.1)
Mba onye si United States of America

Akwụkwọ ikike

Akwụkwọ ikike nwere oke, mwepu akwụkwọ ikike, oke nke ibu, yana ntuziaka arịrịọ RMA
Hụ akwụkwọ ikike SCS - StaticControl.com/Limited-Warranty.aspx.

SCS – 926 JR Industrial Drive, Sanford, NC 27332
East: 919-718-0000 | West: 909-627-9634 • Websaịtị: StaticControl.com.

© 2022 DESCO INDUSTRIES INC onye ọrụ nwere.

Akwụkwọ / akụrụngwa

Nnwale nyocha SCS CTE701 maka nyocha na-aga n'ihu [pdf] Ntuziaka onye ọrụ
Ihe nleba anya nke CTE701 maka nlekota oru na-aga n'ihu, CTE701, Onye nleba anya maka nyocha na-aga n'ihu, Onye nleba anya maka nlekota na-aga n'ihu, Nyocha na-aga n'ihu.

Ntụaka

Ozi ndị metụtara

Hapụ ikwu

Agaghị ebipụta adreesị ozi-e gị. Akara mpaghara achọrọ akara *