Cov ntsiab lus zais
1 SCS CTE701 Verification Tester rau Cov Neeg Saib Xyuas Nruam
2 Kev piav qhia
3 Ntim
4 Nta thiab Cov Cheebtsam
5 Kev teeb tsa
6 Kev ua haujlwm
7 WS Aware Monitor
8 Av Master Monitor
9 Ground Man Plus Workstation Monitor
10 Kev tu
11 Specifications
12 Warranty
13 Cov ntaub ntawv / Cov ntaub ntawv
13.1 Cov ntaub ntawv
14 Related Posts

SCS-LOGO

SCS CTE701 Verification Tester rau Cov Neeg Saib Xyuas Nruam

SCS-CTE701-Verification-Tester-rau-Nruam-Monitor-khoom

Kev piav qhia

SCS CTE701 Verification Tester yog siv los ua qhov kev kuaj xyuas tsis tu ncua ntawm SCS WS Aware Monitor, Ground Master Monitor, Iron Man® Plus Monitor, thiab Ground Man Plus Monitor. Kev txheeb xyuas yuav ua tiav yam tsis tau tshem lub monitor los ntawm nws lub chaw ua haujlwm. Cov Kev Ntsuas Ntsuas yog National Institute of Standards and Technology (NIST) traceable. Qhov ntau zaus ntawm kev txheeb xyuas yog nyob ntawm qhov tseem ceeb ntawm ESD-cov khoom raug cuam tshuam. SCS pom zoo rau kev ntsuas txhua xyoo ntawm cov chaw ua haujlwm saib xyuas thiab CTE701 Verification Tester. Tus CTE701 Verification Tester ua tau raws li ANSI/ESD S20.20 thiab Kev Ua Raws Cai ESD TR53.

Tus SCS CTE701 Verification Tester tuaj yeem siv nrog cov khoom hauv qab no:

Yam khoom Kev piav qhia
770067 WS Aware Monitor
770068 WS Aware Monitor
CTC061-3-242-WW WS Aware Monitor
CTC061-RT-242-WB WS Aware Monitor
CTC062-RT-242-WB WS Aware Monitor
770044 Av Master Monitor
CTC331-WB Iron Man® Plus Monitor
CTC334-WB Ground Man Plus Saib
CTC337-WB Dab teg pluaj thiab hauv av saib
773 Dab teg pluaj thiab hauv av saib

Ntim

  • 1 CTE701 Verification Tester
  • 1 Dub Alligator-rau-Banana Test Lead, 3 ft.
  • 1 Liab Mini Grabber-rau-Banana Test Lead, 3 ft.
  • 1 Dub 3.5 hli Mono Cable, 2 ft.
  • 1 9V Alkaline roj teeb
  • 1 Certificate of Calibration

Nta thiab Cov Cheebtsam

SCS-CTE701-Verification-Tester-for-Continuous-Monitor-fig- (1)

  • A. Tus neeg teb xov tooj Dual-wire Jack: Txuas ib kawg ntawm qhov suav nrog 3.5 hli mono cable ntawm no, thiab lwm qhov kawg rau hauv tus saib tus neeg teb xov tooj jack.
  • B. Mos / Hlau av Txiv tsawb Jack: Txuas lub txiv tsawb ntsaws davhlau ya nyob twg ntawm qhov kev sim liab ntawm no, thiab lwm qhov kawg rau lub saib lub lev lossis cov cuab yeej hauv av.
  • C. Siv av Txiv tsawb Jack: Txuas lub txiv tsawb ntsaws davhlau ya nyob twg ntawm qhov kev sim dub ntawm no, thiab lwm qhov kawg rau hauv av.
  • D. Siab Cev Voltage Test Switch: Simulates BODY VOLTAGE FAIL mob ntawm tus saib xyuas tus neeg teb xov tooj Circuit Court thaum nias.
  • E. Low Body Voltage Tsawg Test Hloov: Simulates BODY VOLTAGE PASS mob ntawm lub monitor tus neeg teb xov tooj Circuit Court thaum nias.
  • F. Soft Ground Test Switch: Simulates MAT PASS mob ntawm tus saib thaum nias.
  • G. Dab teg Strap Test Hloov: Simulates OPERATOR PASS mob ntawm tus saib thaum nias.
  • H. Test Limit DIP Switch: Configures the test limits on the CTE701 Verification Tester.
  • I. High Metal Ground Test Switch: Simulates TOOL FAIL mob ntawm lub monitor thaum nias.
  • J. High EMI Test Hloov: Simulates EMI FAIL mob ntawm tus saib lub cuab yeej Circuit Court thaum nias.
  • K. Tsawg EMI Test Hloov: Simulates EMI PASS mob ntawm tus saib lub cuab yeej Circuit Court thaum nias.
  • L. Low Metal Ground Test Switch: Simulates TOOL PASS mob ntawm tus saib thaum nias.
  • M. Lub roj teeb qis LED: Teeb pom kev thaum lub roj teeb yuav tsum tau hloov.
  • N. Lub Hwj Chim LED: Teeb pom kev thaum lub CTE701 Verification Tester yog powered.
  • O. Lub Hwj Chim Hloov: Xaub mus rau sab laug kom lub zog rau Kev Tshawb Fawb Kev Tshawb Fawb OFF. Swb mus rau sab xis kom lub zog rau Kev Tshawb Fawb Tester ON.

Kev teeb tsa

CTE701 Verification Tester's 10-txoj hauj lwm DIP hloov yog siv los teeb tsa nws cov kev txwv rau cov av mos, hlau hauv av, EMI, thiab tus neeg teb xov tooj.

Av mos
Cov av tsis kam yog teeb tsa nrog cov keyboards 1-4. Nias lub SOFT GROUND pushbutton yuav ua rau lub nra nrog me ntsis qis dua qhov ntsuas qhov txwv.

 

Xeem txwv

   Hloov  
1 2 3 4
1 gihm OFF OFF OFF ON
400 hmo OFF OFF ON ON
100 hmo OFF ON ON ON
10 hmo ON ON ON ON

Hlau av
Cov hlau hauv av impedance yog configured nrog keyboards 5-8. Nias lub HIGH METAL GROUND pushbutton yuav thauj khoom 1 ohm siab dua li qhov ntsuas qhov txwv. Nias lub PASS METAL GROUND pushbutton yuav thauj 1 ohm tsawg dua qhov kev txwv. Rau example, yog tias tus saib xyuas yuav tsum tau kuaj xyuas yog teem rau 10 ohms, Cov Kev Ntsuas Ntsuas yuav xyuas kom meej tias nws dhau ntawm 9 ohms thiab ua tsis tiav ntawm 11 ohms.

 

Xeem txwv

   Hloov  
5 6 7 8
1 awm ON ON ON ON
2 hmo OFF ON ON ON
3 hmo ON OFF ON ON
4 hmo OFF OFF ON ON
5 hmo ON ON OFF ON
6 hmo OFF ON OFF ON
7 hmo ON OFF OFF ON
8 hmo OFF OFF OFF ON
9 hmo ON ON ON OFF
10 hmo OFF ON ON OFF
11 hmo ON OFF ON OFF
12 hmo OFF OFF ON OFF
13 hmo ON ON OFF OFF
14 hmo OFF ON OFF OFF
15 hmo ON OFF OFF OFF
16 hmo OFF OFF OFF OFF

EMI
Lub EMI high-frequency teeb liab tau teeb tsa nrog hloov 9. CTE701 Verification Tester muab ob theem sib txawv ntawm cov teeb liab siab: nce siab thiab ib txwm muaj. Nias lub HIGH EMI pushbutton yuav thauj cov teeb liab siab nyob rau hauv nws qhov ntau. Nias lub khawm LOW EMI yuav thauj cov teeb liab qis hauv nws qhov ntau.

 

Teeb liab theem

 Hloov
9
Ua kom siab ON
Ib txwm OFF

Dab teg pluaj
Lub dab teg pluaj tsis kam yog teeb tsa nrog kev hloov 10. CTE701 Kev Tshawb Fawb Kev Tshawb Fawb muab kev tiv thaiv ntawm qee tus nqi hla lub dab teg pluaj davhlau ya nyob twg hauv kev nkag mus rau simulate lub dab teg pluaj. Ib tug zoo zoo dual-xaim dab teg qaum muaj 1 megohm resistor nyob rau hauv txhua yam ntawm nws cov conductors. Cov Ntawv Pov Thawj Tester yog tsim los simulate dual-wire dab teg pluaj nrog thiab tsis muaj resistors. Lub 12 megohms teeb simulates lub dab teg pluaj nrog ob 1 megohm resistors hauv series.

 

Xeem txwv

 Hloov
10
12 hmo OFF
10 hmo ON

Kev ua haujlwm

Iron Man® Plus Workstation Monitor
CONFIGURING THE VERIFICATION TESTER Configure the Verification Tester's DIP switch to the settings displayed below. Qhov no yuav ua rau nws cov kev txwv tsis pub dhau lub Hoobkas tsis pub dhau lub ntsuas ntsuas.

VERIFYING COV OPERATOR CIRCUITSCS-CTE701-Verification-Tester-for-Continuous-Monitor-fig- (2)

  1. Siv cov kev sim dub coj los txuas rau Kev Tshawb Fawb Tester rau cov khoom siv hauv av.
  2. Fais fab lub Verification Tester ON.
  3. Siv lub 3.5 hli mono cable los txuas lub Verification Tester rau lub monitor tus neeg teb xov tooj jack. Tus saib xyuas tus neeg teb xov tooj LED yuav teeb liab, thiab nws lub tswb yuav nrov.SCS-CTE701-Verification-Tester-for-Continuous-Monitor-fig- (3)
    Txuas lub Verification Tester rau Iron Man® Plus Workstation Monitor tus neeg teb xov tooj jack
  4. Nias thiab tuav lub Verification Tester's WRIST STRAP test switch. Tus saib xyuas tus neeg teb xov tooj LED yuav teeb ntsuab, thiab nws lub tswb nrov yuav nres. Qhov no txheeb xyuas tus neeg teb xov tooj Circuit Court impedance txwv.SCS-CTE701-Verification-Tester-for-Continuous-Monitor-fig- (4)
  5. Txuas ntxiv nias thiab tuav qhov Kev Tshawb Fawb Tester's WRIST STRAP test switch. Nyob rau tib lub sijhawm, nias thiab tuav Cov Ntawv Pov Thawj Tester's LOW BODY VOLTAGE test hloov. Tus saib xyuas tus neeg teb xov tooj LED yuav nyob twj ywm ntsuab, thiab tsis muaj lub tswb nrov yuav suab. Qhov no txheeb xyuas tus neeg teb xov tooj Circuit Court qis lub cev voltage txwv.SCS-CTE701-Verification-Tester-for-Continuous-Monitor-fig- (5)
  6. Txuas ntxiv nias thiab tuav qhov Kev Tshawb Fawb Tester's WRIST STRAP test switch. Nyob rau tib lub sijhawm, nias thiab tuav Cov Ntawv Pov Thawj Tester's HIGH BODY VOLTAGE test hloov. Tus saib xyuas tus neeg teb xov tooj ntsuab LED yuav teeb tsis tu ncua, nws cov LED liab yuav ntsais, thiab lub tswb nrov yuav suab. Qhov no txheeb xyuas tus neeg teb xov tooj Circuit Court lub siab lub cev voltage txwv.SCS-CTE701-Verification-Tester-for-Continuous-Monitor-fig- (6)
  7. Disconnect tus mono cable los ntawm lub monitor.
    VERIFYING LUB CIRCUIT
  8. Txuas cov ntawv xeem liab coj mus rau cov txiv tsawb liab liab nyob rau sab saum toj ntawm Cov Kev Ntsuas Ntsuas.
  9. Tshem tawm lub xov tooj ntawm tes dawb saib lub xov tooj ntawm nws qhov chaw ua haujlwm thiab tig nws kom nthuav tawm nws 10 mm snap.
  10. Clip cov liab xeem lead lub mini grabber mus rau 10 mm snap ntawm dawb lev saib qaum.SCS-CTE701-Verification-Tester-for-Continuous-Monitor-fig- (7)
  11. Tos kwv yees li 5 vib nas this rau tus saib lub lev LED kom teeb liab thiab suab nws lub tswb nrov.
  12. Nias thiab tuav lub Verification Tester's SOFT GROUND test switch. Lub monitor lub lev LED yuav teeb ntsuab, thiab nws lub tswb nrov yuav nres tom qab kwv yees li 3 vib nas this. Qhov no txheeb xyuas qhov mat Circuit Court tsis kam txwv.SCS-CTE701-Verification-Tester-for-Continuous-Monitor-fig- (8)
  13. Tshem tawm cov hlau kuaj liab los ntawm tus saib lub mat dawb saib qaum.
  14. Reinstall lub dawb lev saib qaum rau qhov chaw ua haujlwm lev.
    VERIFYING IRON CIRCUIT
    Nco tseg: Lub zog DC hloov pauv yuav tsum tau siv los ua kom tiav cov txheej txheem no. CTE701 Verification Tester tsis tuaj yeem txheeb xyuas cov hlau hluav taws xob hauv Iron Man® Plus Workstation Monitor.
  15. Tig lub voltage tswb trimppot nyob tom qab ntawm lub monitor tag nrho clockwise. Qhov no configures rau ± 5 V.
  16. Fais fab lub zog hloov pauv DC fais fab mov. Configure nws rau 5.0 V.
  17. Txuas lub davhlau ya nyob twg tsis zoo los ntawm qhov sib txawv ntawm DC fais fab mov mus rau hauv av. Txuas nws lub davhlau ya nyob twg zoo rau cov kab daj daj uas txuas nrog rau tus saib lub BOARD davhlau ya nyob twg. Tus saib lub Iron LED yuav tsum teeb liab thiab nws lub tswb nrov yuav tsum suab.
  18. Teem lub zog DC hloov pauv mus rau 4.0 V. Tus saib lub Iron LED yuav tsum teeb ntsuab thiab nws lub tswb nrov yuav tsum nres.
  19. Tshem tawm qhov sib txawv ntawm DC fais fab mov los ntawm lub monitor thiab hauv av. Txuas nws lub davhlau ya nyob twg zoo rau hauv av thiab nws lub davhlau ya nyob twg tsis zoo rau tus saib lub xov tooj cua daj.
  20. Xyuas kom tseeb tias qhov sib txawv ntawm DC fais fab mov tseem raug teeb tsa rau 4.0 V. Tus saib lub Iron LED yuav tsum teeb ntsuab.
  21. Teem lub zog DC hloov pauv mus rau 5.0 V. Tus saib lub Iron LED yuav tsum teeb liab thiab nws lub tswb nrov yuav tsum suab.

WS Aware Monitor

CONFIGURING VERIFICATION Tester
Configure the Verification Tester's DIP switch to the settings displayed below. Qhov no yuav ua rau nws cov kev txwv tsis pub dhau lub Hoobkas tsis pub dhau lub ntsuas ntsuas.SCS-CTE701-Verification-Tester-for-Continuous-Monitor-fig- (9)

VERIFYING COV OPERATOR CIRCUIT

  1. Siv cov kev sim dub coj los txuas rau Kev Tshawb Fawb Tester rau cov khoom siv hauv av.
  2. Fais fab lub Verification Tester ON.
  3. Siv lub 3.5 hli mono cable los txuas lub Verification Tester rau lub monitor tus neeg teb xov tooj jack. Tus saib xyuas tus neeg teb xov tooj LED yuav teeb liab, thiab nws lub tswb yuav nrov.SCS-CTE701-Verification-Tester-for-Continuous-Monitor-fig- (10)
  4. Nias thiab tuav lub Verification Tester's WRIST STRAP test switch. Tus saib xyuas tus neeg teb xov tooj LED yuav teeb ntsuab, thiab nws lub tswb nrov yuav nres. Qhov no txheeb xyuas tus neeg teb xov tooj Circuit Court impedance txwv.SCS-CTE701-Verification-Tester-for-Continuous-Monitor-fig- (11)
  5. Txuas ntxiv nias thiab tuav qhov Kev Tshawb Fawb Tester's WRIST STRAP test switch. Nyob rau tib lub sijhawm, nias thiab tuav Cov Ntawv Pov Thawj Tester's LOW BODY VOLTAGE test hloov. Tus saib xyuas tus neeg teb xov tooj LED yuav nyob twj ywm ntsuab, thiab tsis muaj lub tswb nrov yuav suab. Qhov no txheeb xyuas tus neeg teb xov tooj Circuit Court qis lub cev voltage txwv.SCS-CTE701-Verification-Tester-for-Continuous-Monitor-fig- (12)
  6. Txuas ntxiv nias thiab tuav qhov Kev Tshawb Fawb Tester's WRIST STRAP test switch. Nyob rau tib lub sijhawm, nias thiab tuav Cov Ntawv Pov Thawj Tester's HIGH BODY VOLTAGE test hloov. Tus saib xyuas tus neeg teb xov tooj ntsuab LED yuav teeb tsis tu ncua, nws cov LED liab yuav ntsais. Qhov no txheeb xyuas tus neeg teb xov tooj Circuit Court lub siab lub cev voltage txwv.SCS-CTE701-Verification-Tester-for-Continuous-Monitor-fig- (13)
  7. Disconnect tus mono cable los ntawm lub monitor.
    VERIFYING LUB CIRCUIT
  8. Txuas cov ntawv xeem liab coj mus rau cov txiv tsawb liab liab nyob rau sab saum toj ntawm Cov Kev Ntsuas Ntsuas.
  9. Tshem tawm lub xov tooj ntawm tes dawb saib lub xov tooj ntawm nws qhov chaw ua haujlwm thiab tig nws kom nthuav tawm nws 10 mm snap.
  10. Clip cov liab xeem lead lub mini grabber mus rau 10 mm snap ntawm dawb lev saib qaum.SCS-CTE701-Verification-Tester-for-Continuous-Monitor-fig- (14)
  11. Tos kwv yees li 5 vib nas this rau tus saib lub lev LED kom teeb liab thiab suab nws lub tswb nrov.
  12. Nias thiab tuav lub Verification Tester's SOFT GROUND test switch. Lub monitor lub lev LED yuav teeb ntsuab, thiab nws lub tswb nrov yuav nres tom qab kwv yees li 3 vib nas this. Qhov no txheeb xyuas qhov mat Circuit Court tsis kam txwv.SCS-CTE701-Verification-Tester-for-Continuous-Monitor-fig- (15)
  13. Tshem tawm cov hlau kuaj liab los ntawm tus saib lub mat dawb saib qaum.
  14. Reinstall lub dawb lev saib qaum rau qhov chaw ua haujlwm lev.
    VERIFYING THE TOOL CIRCUIT
  15. Disconnect tus saib lub cuab tam qaum ntawm nws cov cuab yeej hlau.
  16. Clip tus liab xeem lead lub mini grabber rau lub cuab tam qaum.SCS-CTE701-Verification-Tester-for-Continuous-Monitor-fig- (16)
  17. Tos rau tus saib lub cuab yeej LED kom teeb liab thiab suab nws lub tswb nrov.
  18. Nias thiab tuav lub Verification Tester's METAL GROUND PASS test switch. Tus saib lub cuab yeej LED yuav teeb ntsuab, thiab nws lub tswb nrov yuav nres. Qhov no txheeb xyuas cov cuab yeej Circuit Court impedance txwv.SCS-CTE701-Verification-Tester-for-Continuous-Monitor-fig- (17)
  19. Nias thiab tuav lub Verification Tester's METAL GROUND FAIL test switch. Tus saib lub cuab yeej LED yuav teeb liab, thiab nws lub tswb nrov yuav suab. Qhov no txheeb xyuas cov cuab yeej Circuit Court impedance txwv.SCS-CTE701-Verification-Tester-for-Continuous-Monitor-fig- (18)
  20. Nias thiab tuav lub Verification Tester's METAL GROUND PASS test switch. Nyob rau tib lub sijhawm, nias thiab tuav lub Pov Thawj Tester's EMI LOW test switch. Tus saib lub cuab yeej LED yuav nyob twj ywm ntsuab, thiab tsis muaj lub tswb nrov yuav suab. Qhov no txheeb xyuas tus neeg teb xov tooj Circuit Court qis EMI voltage txwv.SCS-CTE701-Verification-Tester-for-Continuous-Monitor-fig- (19)
  21. Nias thiab tuav lub Verification Tester's METAL GROUND PASS test switch. Nyob rau tib lub sijhawm, nias thiab tuav lub Pov Thawj Tester's EMI HIGH xeem hloov. Tus saib lub cuab yeej LED yuav ntsais liab, thiab nws lub tswb nrov yuav suab. Qhov no txheeb xyuas tus neeg teb xov tooj Circuit Court siab EMI voltage txwv.SCS-CTE701-Verification-Tester-for-Continuous-Monitor-fig- (20)
  22. Tshem tawm cov hlau kuaj liab ntawm tus saib lub cuab yeej qaum.
  23. Reinstall lub cuab tam qaum rau lub cuab yeej hlau.

Av Master Monitor

CONFIGURING VERIFICATION Tester
Configure the Verification Tester's DIP switch to the settings displayed below. Qhov no yuav ua rau nws cov kev txwv tsis pub dhau lub Hoobkas tsis pub dhau lub ntsuas ntsuas.SCS-CTE701-Verification-Tester-for-Continuous-Monitor-fig- (21)

VERIFYING THE TOOL CIRCUIT

  1. Disconnect tus saib lub cuab tam qaum ntawm nws cov cuab yeej hlau.
  2. Clip tus liab xeem lead lub mini grabber rau lub cuab tam qaum.SCS-CTE701-Verification-Tester-for-Continuous-Monitor-fig- (22)
  3. Tos rau tus saib lub cuab yeej LED kom teeb liab thiab suab nws lub tswb nrov.
  4. Nias thiab tuav lub Verification Tester's METAL GROUND PASS test switch. Tus saib lub cuab yeej LED yuav teeb ntsuab, thiab nws lub tswb nrov yuav nres. Qhov no txheeb xyuas cov cuab yeej Circuit Court impedance txwv.SCS-CTE701-Verification-Tester-for-Continuous-Monitor-fig- (23)
  5. Nias thiab tuav lub Verification Tester's METAL GROUND FAIL test switch. Tus saib lub cuab yeej LED yuav teeb liab, thiab nws lub tswb nrov yuav suab. Qhov no txheeb xyuas cov cuab yeej Circuit Court impedance txwv.SCS-CTE701-Verification-Tester-for-Continuous-Monitor-fig- (24)
  6. Nias thiab tuav lub Verification Tester's METAL GROUND PASS test switch. Nyob rau tib lub sijhawm, nias thiab tuav lub Pov Thawj Tester's EMI LOW test switch. Tus saib lub cuab yeej LED yuav nyob twj ywm ntsuab, thiab tsis muaj lub tswb nrov yuav suab. Qhov no txheeb xyuas tus neeg teb xov tooj Circuit Court qis EMI voltage txwv.SCS-CTE701-Verification-Tester-for-Continuous-Monitor-fig- (25)
  7. Nias thiab tuav lub Verification Tester's METAL GROUND PASS test switch. Nyob rau tib lub sijhawm, nias thiab tuav lub Pov Thawj Tester's EMI HIGH xeem hloov. Tus saib lub cuab yeej LED yuav ntsais liab, thiab nws lub tswb nrov yuav suab. Qhov no txheeb xyuas tus neeg teb xov tooj Circuit Court siab EMI voltage txwv.SCS-CTE701-Verification-Tester-for-Continuous-Monitor-fig- (26)
  8. Tshem tawm cov hlau kuaj liab ntawm tus saib lub cuab yeej qaum.
  9. Reinstall lub cuab tam qaum rau lub cuab yeej hlau.

Ground Man Plus Workstation Monitor

CONFIGURING VERIFICATION Tester
Configure the Verification Tester's DIP switch to the settings displayed below. Qhov no yuav ua rau nws cov kev txwv tsis pub dhau lub Hoobkas tsis pub dhau lub ntsuas ntsuas.SCS-CTE701-Verification-Tester-for-Continuous-Monitor-fig- (27)

VERIFYING COV OPERATOR CIRCUIT

  1. Siv cov kev sim dub coj los txuas rau Kev Tshawb Fawb Tester rau cov khoom siv hauv av.
  2. Fais fab lub Verification Tester ON.
  3. Siv lub 3.5 hli mono cable los txuas lub Verification Tester rau lub monitor tus neeg teb xov tooj jack. Tus saib xyuas tus neeg teb xov tooj LED yuav teeb liab, thiab nws lub tswb yuav nrov.SCS-CTE701-Verification-Tester-for-Continuous-Monitor-fig- (28)
  4. Nias thiab tuav lub Verification Tester's WRIST STRAP test switch. Tus saib xyuas tus neeg teb xov tooj LED yuav teeb ntsuab, thiab nws lub tswb nrov yuav nres. Qhov no txheeb xyuas tus neeg teb xov tooj Circuit Court impedance txwv.SCS-CTE701-Verification-Tester-for-Continuous-Monitor-fig- (29)
  5. Txuas ntxiv nias thiab tuav qhov Kev Tshawb Fawb Tester's WRIST STRAP test switch. Nyob rau tib lub sijhawm, nias thiab tuav Cov Ntawv Pov Thawj Tester's LOW BODY VOLTAGE test hloov. Tus saib xyuas tus neeg teb xov tooj LED yuav nyob twj ywm ntsuab, thiab tsis muaj lub tswb nrov yuav suab. Qhov no txheeb xyuas tus neeg teb xov tooj Circuit Court qis lub cev voltage txwv.SCS-CTE701-Verification-Tester-for-Continuous-Monitor-fig- (30)
  6. Txuas ntxiv nias thiab tuav qhov Kev Tshawb Fawb Tester's WRIST STRAP test switch. Nyob rau tib lub sijhawm, nias thiab tuav Cov Ntawv Pov Thawj Tester's HIGH BODY VOLTAGE test hloov. Tus saib xyuas tus neeg teb xov tooj ntsuab LED yuav teeb tsis tu ncua, nws cov LED liab yuav ntsais, thiab lub tswb nrov yuav suab. Qhov no txheeb xyuas tus neeg teb xov tooj Circuit Court lub siab lub cev voltage txwv.SCS-CTE701-Verification-Tester-for-Continuous-Monitor-fig- (31)
  7. Disconnect tus mono cable los ntawm lub monitor.
    VERIFYING THE TOOL CIRCUIT
  8. Disconnect tus saib lub cuab tam qaum ntawm nws cov cuab yeej hlau.
  9. Clip tus liab xeem lead lub mini grabber rau lub cuab tam qaum.SCS-CTE701-Verification-Tester-for-Continuous-Monitor-fig- (32)
  10. Tos rau tus saib lub cuab yeej LED kom teeb liab thiab suab nws lub tswb nrov.
  11. Nias thiab tuav lub Verification Tester's METAL GROUND PASS test switch. Tus saib lub cuab yeej LED yuav teeb ntsuab, thiab nws lub tswb nrov yuav nres. Qhov no txheeb xyuas cov cuab yeej Circuit Court impedance txwv.SCS-CTE701-Verification-Tester-for-Continuous-Monitor-fig- (33)
  12. Nias thiab tuav lub Verification Tester's METAL GROUND FAIL test switch. Tus saib lub cuab yeej LED yuav teeb liab, thiab nws lub tswb nrov yuav suab. Qhov no txheeb xyuas cov cuab yeej Circuit Court impedance txwv.SCS-CTE701-Verification-Tester-for-Continuous-Monitor-fig- (34)
  13. Nias thiab tuav lub Verification Tester's METAL GROUND PASS test switch. Nyob rau tib lub sijhawm, nias thiab tuav lub Pov Thawj Tester's EMI LOW test switch. Tus saib lub cuab yeej LED yuav nyob twj ywm ntsuab, thiab tsis muaj lub tswb nrov yuav suab. Qhov no txheeb xyuas tus neeg teb xov tooj Circuit Court qis EMI voltage txwv.SCS-CTE701-Verification-Tester-for-Continuous-Monitor-fig- (35)
  14. Nias thiab tuav lub Verification Tester's METAL GROUND PASS test switch. Nyob rau tib lub sijhawm, nias thiab tuav lub Pov Thawj Tester's EMI HIGH xeem hloov. Tus saib lub cuab yeej LED yuav ntsais liab, thiab nws lub tswb nrov yuav suab. Qhov no txheeb xyuas tus neeg teb xov tooj Circuit Court siab EMI voltage txwv.SCS-CTE701-Verification-Tester-for-Continuous-Monitor-fig- (36)
  15. Tshem tawm cov hlau kuaj liab ntawm tus saib lub cuab yeej qaum.
  16. Reinstall lub cuab tam qaum rau lub cuab yeej hlau.

Kev tu

Hloov roj teeb
Hloov lub roj teeb ib zaug lub Low Battery LED illuminates liab. Qhib qhov chaw nyob rau sab nraum qab ntawm lub tester los hloov lub roj teeb. Lub tester siv ib lub roj teeb 9V alkaline. Xyuas kom meej tias lub roj teeb lub polarities yog taw qhia kom raug kom tsis txhob muaj kev puas tsuaj rau hauv Circuit Court.

Specifications

 Ua haujlwm kub 50 txog 95 ° F (10 txog 35 ° C)
Environmental Requirements Kev siv sab hauv tsev tsuas yog qhov siab tsawg dua 6500 ft. (2 km)

Cov av noo siab tshaj plaws ntawm 80% txog 85 ° F (30 ° C) txo qis rau 50% @ 85 ° F (30 ° C)
Qhov ntev 4.9 "L x 2.8" W x 1.3" H (124 hli x 71 hli x 33 hli)
Qhov hnyav 0.2 lbs. (0.1 kg)
Lub Tebchaws Keeb Kwm Tebchaws Meskas

Warranty

Tsawg Warranty, Warranty Exclusions, Limit of Liability, thiab RMA Request Instructions
Saib SCS Warranty – StaticControl.com/Limited-Warranty.aspx.

SCS – 926 JR Industrial Drive, Sanford, NC 27332
Sab hnub tuaj: 919-718-0000 Ib | Sab hnub poob: 909-627-9634 Ib • Webqhov chaw: StaticControl.com.

© 2022 DESCO INDUSTRIES INC Cov neeg ua haujlwm muaj tswv.

Cov ntaub ntawv / Cov ntaub ntawv

SCS CTE701 Verification Tester rau Cov Neeg Saib Xyuas Nruam [ua pdf] Cov neeg siv phau ntawv qhia
CTE701 Verification Tester rau Continuous Monitors, CTE701, Verification Tester rau Continuous Monitors, Tester rau Continuous Monitors, Continuous Monitors

Cov ntaub ntawv

Related Posts

Cia ib saib

Koj email chaw nyob yuav tsis raug luam tawm. Cov teb uas yuav tsum tau muaj yog cim *