Raspberry Pi Camera Module 3
Tlhahisoleseding ya Sehlahiswa
Litlhaloso
- Sensor: IMX708 12-megapixel sensor e nang le HDR
- Qeto: Ho fihlela ho 3 megapixels
- Boholo ba kutlo: 23.862 x 14.5 limilimithara
- Boholo ba pixel: 2.0 limilimithara
- E tšekaletseng/e theohileng: 8.9 x 19.61 limilimithara
- Mefuta e tloaelehileng ea lifitio: HD e felletseng
- Sephetho: HDR mode ho fihla ho 3 megapixels
- IR cut filter: E fumaneha ka mefuta e fapaneng kapa ntle le eona
- Autofocus system: Phase ea ho lemoha autofocus
- Boholo: E fapana ho latela mofuta oa lense
- Bolelele ba cable ea ribone: 11.3 cm
- Sehokelo sa thapo: Sehokelo sa FPC
Litaelo tsa Tšebeliso ea Sehlahisoa
Ho kenya
- Netefatsa hore komporo ea hau ea Raspberry Pi e tima.
- Fumana boema-kepe ba khamera ho boto ea hau ea Raspberry Pi.
- Ka bonolo kenya thapo ea ribone ea Module 3 ea Khamera boema-kepeng ba khamera, ho etsa bonnete ba hore e hoketsoe ka mokhoa o sireletsehileng.
- Haeba u sebelisa phapang e pharaletseng, fetola lense ho fihlela sebaka se lakatsehang sa view.
Nka litšoantšo le livideo
- Kenya matla komporong ea hau ea Raspberry Pi.
- Fumana software ea khamera ho Raspberry Pi ea hau.
- Khetha mokhoa oo u o batlang (video kapa foto).
- Fetola litlhophiso tsa khamera joalo ka ho tsepamisa maikutlo le ho pepeseha ha ho hlokahala.
- Tobetsa konopo ea ho nka foto kapa ho qala / ho emisa ho rekota livideo.
Tlhokomelo
Boloka lense ea khamera e hloekile ka ho sebelisa lesela le bonolo, le se nang letlapa. Qoba ho ama lense ka ho toba ka menoana ea hau.
LBH
- P: Na Camera Module 3 e tsamaisana le mefuta eohle ea Raspberry Pi?
A: Ee, Mojule oa 3 oa Khamera e sebetsa le likhomphutha tsohle tsa Raspberry Pi ntle le mefuta ea khale ea Raspberry Pi Zero e hlokang sehokelo sa FPC se hlokahalang. - P: A na nka sebelisa matla a kantle ka Camera Module 3?
A: E, u ka sebelisa matla a kantle ka Module oa 3 oa Khamera, empa etsa bonnete ba hore u latela litaelo tsa polokeho tse fanoeng bukeng ea tataiso ho qoba likotsi leha e le life.
Fetileview
Raspberry Pi Camera Module 3 ke kh'amera e kopaneng e tsoang ho Raspberry Pi. E fana ka sensor ea IMX708 12-megapixel e nang le HDR, 'me e fana ka likarolo tsa ho lemoha autofocus. Mojule oa 3 oa Khamera e fumaneha ka mefuta e tloaelehileng le e sephara, 'me ka bobeli e fumaneha ka mochini o sehiloeng oa infrared kapa ntle le eona.
Khamera Module 3 e ka sebelisoa ho nka video e felletseng ea HD hammoho le linepe tse khutsitseng, 'me e fana ka mofuta oa HDR ho fihla ho li-megapixel tse 3. Ts'ebetso ea eona e tšehetsoa ka botlalo ke laeborari ea libcamera, ho kenyeletsoa sebopeho sa autofocus sa Camera Module 3: sena se nolofalletsa ba qalang ho se sebelisa, ha se ntse se fana ka bongata bakeng sa basebelisi ba tsoetseng pele. Khamera Module 3 e lumellana le lik'homphieutha tsohle tsa Raspberry Pi.1
Boholo ba PCB le masoba a ntseng a phahama li lula li tšoana le tsa Mojule oa 2 oa Khamera. Bophahamo ba Z boa fapana: ka lebaka la optics e ntlafalitsoeng, Mojule oa 3 oa Khamera o bolelele ba limilimithara tse 'maloa ho feta Mojule oa 2 oa Khamera.
Mefuta eohle ea likarolo tsa Camera Module 3:
- Sensor ea setšoantšo sa CMOS 12-megapixel e khantšitsoeng ka morao le e pakiloeng (Sony IMX708)
- Karolelano e phahameng ea mats'oao-ho-noise (SNR)
- Tokiso e Hahelletsoeng ka 2D Dynamic Defect Pixel (DPC)
- Phase Detection Autofocus (PDAF) bakeng sa autofocus e potlakileng
- QBC Re-mosaic tshebetso
- Mokhoa oa HDR (ho fihla ho 3 megapixels tlhahiso)
- CSI-2 serial data tlhahiso
- Puisano ea serial ea 2-wire (e tšehetsa mokhoa o potlakileng oa I2C le mokhoa o potlakileng oa ho kopanya)
- Taolo ea 2-wire serial ea mochine o tsepamisitsoeng maikutlo
Ntle le mefuta ea pele ea Raspberry Pi Zero, e se nang sehokelo se hlokahalang sa FPC. Hamorao mefuta ea Raspberry Pi Zero e hloka adaptara ea FPC, e rekisoang ka thoko.
Tlhaloso
- Sensor: Sony IMX708
- Qeto: 11.9 megapixels
- Boholo ba kutlo: 7.4mm sensor diagonal
- Boholo ba pixel: 1.4μm × 1.4μm
- E tšekaletseng/e theohileng: Li-pixels tse 4608 × 2592
- Mefuta e tloaelehileng ea lifitio: 1080p50, 720p100, 480p120
- Sephetho: RAW10
- IR cut filter: E kopantsoe ka mefuta-futa e tloaelehileng; ha e fumanehe ka mefuta ea NoIR
- Autofocus system: Phase ea ho lemoha Autofocus
- Boholo: 25 × 24 × 11.5mm (bolelele ba 12.4mm bakeng sa mefuta e mengata e fapaneng)
- Bolelele ba cable ea ribone: 200 limilimithara
- Sehokelo sa thapo: 15 × 1mm FPC
- Thempereichara ea ho sebetsa: 0°C ho isa ho 50°C
- Tumellano: FCC 47 CFR Karolo ea 15, Karolo ea B, Sehlopha sa B Digital Device Electromagnetic Compatibility Directive (EMC) 2014/30/EU Restriction of Hazardous Substances (RoHS) Directive 2011/65/EU
- Production bophelong: Raspberry Pi Camera Module 3 e tla lula e hlahisoa ho fihlela bonyane Pherekhong 2030
Tlhaloso ea 'mele
- Lense e tloaelehileng
- Lense e pharaletseng
Hlokomela: litekanyo tsohle ho mamello ea limilimithara li nepahetse ho 0.2mm
Mefuta e fapaneng
| Khamera Module 3 | Khamera Module 3 NoIR | Khamera Module 3 Bophara | Khamera Module 3 Wide NoIR | |
| Tsepamiso ea maikutlo | 10cm–∞ | 10cm–∞ | 5cm–∞ | 5cm–∞ |
| Bolelele ba tsepamiso | 4.74 limilimithara | 4.74 limilimithara | 2.75 limilimithara | 2.75 limilimithara |
| Diagonal tšimo ea view | 75 likhato | 75 likhato | 120 likhato | 120 likhato |
| E tshekaletseng tšimo ea view | 66 likhato | 66 likhato | 102 likhato | 102 likhato |
| E otlolohileng tšimo ea view | 41 likhato | 41 likhato | 67 likhato | 67 likhato |
| Tsepamisa maikutlo karo-karolelano (F-stop) | F1.8 | F1.8 | F2.2 | F2.2 |
| E bonahatsoa ke infrared | Che | Ee | Che | Ee |
TEMOSO
- Sehlahisoa sena se lokela ho sebetsoa sebakeng se nang le moea o motle, 'me haeba se sebelisoa ka har'a mokotla, mokotla ha oa lokela ho koaheloa.
- Ha e ntse e sebelisoa, sehlahisoa sena se lokela ho tiisoa ka thata kapa se behoe sebakeng se tsitsitseng, se bataletseng, se se nang conductive, 'me ha sea lokela ho kopana le lintho tse tsamaisang.
- Kgokelo ya disebediswa tse sa dumellaneng le Raspberry Camera Module 3 e ka ama boikamahanyo, ya baka tshenyo ho yuniti, mme ya etsa hore waranti e se sebetse.
- Lisebelisoa tsohle tse sebelisoang le sehlahisoa sena li lokela ho lumellana le maemo a amehang bakeng sa naha eo li sebelisoang ka eona 'me li tšoaiwe ho latela litlhoko tsa polokeho le ts'ebetso li fihlelleha.
TŠIRELETSO LITS'ELISO
Ho qoba ho se sebetse hantle kapa ho senyeha ha sehlahisoa sena, ka kopo ela hloko tse latelang:
- Bohlokoa: Pele o hokela sesebelisoa sena, koala komporo ea hau ea Raspberry Pi 'me u e tlose ho matla a kantle.
- Haeba thapo e haroha, hula pele mochini oa ho notlela sehokelong, ebe u kenya thapo ea ribone ho netefatsa hore likhokahano tsa tšepe li shebane le boto ea potoloho, 'me qetellong u sutumelle mochini oa ho notlela morao sebakeng.
- Sesebediswa sena se lokela ho sebetswa sebakeng se ommeng ho 0–50°C.
- Se ke oa pepesehela metsi kapa mongobo, kapa ua beha sebakeng sa conductive ha o ntse o sebetsa.
- U se ke ua pepesa mocheso o tsoang mohloling ofe kapa ofe; Raspberry Pi Camera Module 3 e etselitsoe ts'ebetso e tšepahalang ka mocheso o tloaelehileng oa tikoloho.
- Boloka sebakeng se phodileng, se omileng.
- Qoba liphetoho tse potlakileng tsa mocheso, tse ka etsang hore mongobo o be teng ka har'a sesebelisoa, tse amang boleng ba setšoantšo.
- Hlokomela hore o se ke oa mena kapa oa sefa thapo ea ribone.
- Hlokomela ha o ntse o sebetsana le ho qoba tšenyo ea mochini kapa ea motlakase ho boto ea potoloho le likhokelo.
- Ha e ntse e sebelisoa, qoba ho tšoara boto ea potoloho e hatisitsoeng, kapa u e tšoare feela ka mathōko, ho fokotsa kotsi ea tšenyo ea motlakase.
Raspberry Pi ke lets'oao la khoebo la Raspberry Pi Ltd.
Litokomane / Lisebelisoa
 |
Raspberry Pi Camera Module 3 [pdf] Buka ea Mong'a Khamera Module 3 Standard, Khamera Module 3 NoIR Wide, Khamera Module 3, Module 3 |
