ArduCam 12MP IMX477 Mini HQ Camera Module bakeng sa Raspberry Pi Owner's Manua

Module ena ea kh'amera ea Arducam 12MP IMX477 bakeng sa Raspberry Pi e na le boholo bo lekanang ba boto ea kh'amera le masoba a holang joalo ka Raspberry Pi Camera Module V2. Eona
ha e tsamaellane feela le mefuta eohle ea Raspberry Pi 1, 2, 3 le 4, empa hape le Raspberry Pi Zero le Zero 2W, e ka sebelisoang habonolo ka tlhophiso e bonolo.

KHOKANG KHAMERA

1. Kenya sehokelo 'me u netefatse hore se shebane le boema-kepe ba Raspberry Pi MIPI. U se ke ua koba thapo e feto-fetohang 'me u netefatse hore e kentsoe ka thata.
2. Sutumelletsa sehokelo sa polasetiki fatše ha u ntse u tšoere thapo ea flex ho fihlela sehokelo se khutletse sebakeng
   

LIEKETSENG

• Boholo: 25x24x23mm
• Qeto e ntseng e le teng: 12.3 megapixels
• Mekhoa ea video: Mefuta ea video: 1080p30, 720p60 le 640 × 480p60/90
• Khokahano ea Linux: Mokhanni oa V4L2 o teng
• Sensor: Sony IMX477
• Qeto ea Sensor: 4056 x 3040 pixels
• Sebaka sa setšoantšo sa sensor: 6.287mm x 4.712 mm (7.9mm diagonal)
• Pixel boholo1.55 µm x 1.55 µm
• Boikutlo ba IR: Leseli le bonahalang
• Sehokelo: 2-lane MIPI CSI-2
• Sekoti: E lumellana le 12mm, 20mm
• Bolelele ba sebaka: 3.9 limilimithara
• FOV: 75° (H)
• Thaba: Thaba ea M12

SEHLOOHO SOFTWARE

Ka kopo etsa bonnete ba hore u sebelisa mofuta oa morao-rao oa Raspberry Pi OS. (Pherekhong 28th 2022 kapa hamorao, mofuta oa Debian: 11 (bullseye)).

Bakeng sa basebelisi ba Raspbian Bullseye, ka kopo etsa se latelang:

1. Fetola tlhophiso file: sudo nano /boot/config.txt
2.  Fumana mohala: camera_auto_detect=1, e nchafatse ho: camera_auto_detect=0 dtoverlay=imx477
3. Boloka le ho qala bocha.

Bakeng sa basebelisi ba Bullseye ba mathang ho Pi 0-3, ka kopo hape:

1.  Bula terminal
2. Matha sudo raspi-config
3. Tsamaea ho Likhetho tse Tsoetseng Pele
4. Lumella ho potlakisa litšoantšo tsa Glamour
5. Qala hape Pi ea hau.

TS'ELISO KHAMERA

ibcamera-e ntse e le sesebelisoa se tsoetseng pele sa taelo ea ho nka litšoantšo tse ntseng li le teng ka IMX477 Camera Module. libcamera-still -t 5000 -o test.jpg Taelo ena e tla u fa bophelo peleview ea module ea khamera, le ka mor'a 5
ka metsotsoana, khamera e tla nka setšoantšo se le seng se khutsitseng. Setšoantšo se tla bolokoa ho
foldara ea hau ea lapeng mme e rehetsoe test.jpg.

• t 5000: Phela pele hoview bakeng sa metsotsoana e 5.
• o test.jpg: nka setšoantšo ka mor'a peleview e felile 'me u e boloke e le teko.jpg

Haeba feela u batla ho bona bophelo peleview, sebelisa taelo e latelang: libcamera-still -t 0

Hlokomela:
Module ona oa kh'amera o ts'ehetsa Raspberry Pi OS Bullseye ea morao-rao (e lokollotsoeng
ka la 28 Pherekhong 2022) le lits'ebetso tsa libcamera, eseng bakeng sa basebelisi ba khale ba Raspberry Pi OS (Legacy).

TŠEBELETSO E EKETSEHILENG

Ho fumana lintlha tse ling, sheba linki e latelang: https://www.arducam.com/docs/lik'hamera-bakeng sa-raspberry-pi/raspberry-pi-libcamera-guide/

ITEANYE LE RONA

Email: tšehetso@arducam.com
Foramo: https://www.arducam.com/forums/
Skype: moepa

Litokomane / Lisebelisoa

ArduCam 12MP IMX477 Mini HQ Camera Module bakeng sa Raspberry Pi [pdf] Buka ea Mong'a B0262, 12MP IMX477 Mini HQ Camera Module bakeng sa Raspberry Pi, 12MP Camera Module bakeng sa Raspberry Pi, IMX477 Mini HQ Camera Module bakeng sa Raspberry Pi, Mini HQ Camera Module bakeng sa Raspberry Pi, Mini Camera Module bakeng sa Raspberry Pi, HQ Camera Module bakeng sa Raspberry Pi, Mojule oa Khamera bakeng sa Raspberry Pi, Module oa Khamera, Raspberry Pi Camera Module, Mojule

Litšupiso

• Bukana ea Mosebelisi