NELSEN CHIP RO Controller System Controller Documentation Taelo ea Tataiso

Tafole 1 - Litlhaloso

Lintho tse kenang
Phetoho ea boemo ba tanka	(1) Ho Koaloa ka Hangata. RO E sebetsa ha ho koaloa switch.
Khatello ea ho kena	Ka tloaelo-Bula. Switch e bula ka khatello e tlase.
Lockout switch	Ka tloaelo-Bula. Ho notlela esale pele ho sebetsa ka ho koala switch
	HLOKOMELA: Lisebelisoa tsohle tsa switjha ke mabitso a omileng. Moqtage sebelisoang ho li-switches e tla senya molaoli
Matla a ho Laola	120/240 VAC, 60/50Hz (Range: 96-264 VAC)
	Motlakase o fetohang o ikamahanya le ho fana ka voltage. Phatlalatsotage sebelisoa ho kenya letsoho ke molumo o tšoanangtage enjene le li-valve li tla sebetsa.
Litlhaloso tsa Relay ea Liphetho
Fepa Solenoid	12A. Output Voltage tšoana le motor/supply voltage.
Hlatsoa Solenoid	12A. Output Voltage tšoana le motor/supply voltage.
	Lintlha tse ka holimo li bonts'a matla a li-relay feela. Bokhoni ba hona joale ba potoloho ka 'ngoe ke 2A.
Motor	1.0 HP @ 120V 2.0 HP @ 240V
Tšireletso ea Potoloho
Controller Power Fuse	F1 5x20mm	1/4 (0.25) Amp	Fuse e nyane 0218.250MXP
	Tšireletso ea potoloho ea lekala, tšireletso ea motlakase le valve e tlameha ho fanoa ka ntle
Tse ding
Litekanyo	7" bolelele, 5" bophara, 2.375" botebo. Nema 4X Polycarbonate Enclosure
Boima ba 'mele	lik'hilograma tse 1.1.
Tikoloho	0-50°C, 10-90%RH (e sa nyenyefatseng)

Setšoantšo sa 1. Controller Overview

 Setšoantšo sa 2 - Tlhaloso ea Molaoli

Setšoantšo sa 3

Setšoantšo sa 4:

Litlhophiso tsa Lenaneo la RO
Fetola 1	Fetola 2	Lenaneo
TLOA	TLOA	1
ON	TLOA	2
TLOA	ON	3
ON	ON	4

Letlapa la 2 - Lenaneo la Molaoli: Khetho ea Lenaneo la CHIP

Molaoli o na le litlhophiso tse 4 tse ikhethileng tsa mosebelisi bakeng sa ho hlophisa RO. Litlhophiso tsa kamehla tsa feme li bonts'itsoe ka tlase. Litlhophiso li ts'oana ntle le ho fapana ha mokhoa oa flush.

• Lenaneo 1: High Pressure Flush
• Lenaneo 2: Ha ho Flush
• Lenaneo 3: Permeate Flush, (khatello e tlase, valve e kenang e koetsoe)
• Lenaneo 4: Khatello e tlase, Fepa Metsi a Hlahla
• Sheba leqephe le fetileng bakeng sa litaelo tsa ho khetha mananeo ana.
• Sheba Sehlomathiso A bakeng sa tlhaloso e qaqileng ea Parameters le phello ea eona mosebetsing oa RO.
• Sheba Sehlomathiso sa B bakeng sa tlhahisoleseding mabapi le sebopeho sa mananeo bakeng sa ho sebelisoa ho fetola litlhophiso tsena.

Paramethara	Boleng	Lenaneo 1	Lenaneo 2	Lenaneo 3	Lenaneo 4
Ho lieha ha Tanka Level Switch (ts'ebetso le ts'ebetso)	Metsotsoana	2	2	2	2
Ho lieha ha khatello ea khatello (ketso le ts'ebetso)	Metsotsoana	2	2	2	2
Pretreat Switch delay (ketso le ts'ebetso)	Metsotsoana	2	2	2	2
Ho lieha ho qala pompo	Metsotsoana	10	10	10	10
Inlet Solenid emisa tieho	Metsotsoana	1	1	1	1
Pompe e qala ho leka nako (ho lieha ho qala ka mor'a phoso ea LP)	Metsotsoana	60	60	60	60
Khatello e tlase ea phoso e koalang, # ea liphoso	Liphoso	5	5	5	5
Khatello e tlase ea phoso e koalang, nako ea ho bala liphoso	Metsotso	10	10	10	10
Khatello e tlaase ea phoso e koala, tsosolosa ka mor'a ho koala	Metsotso	60	60	60	60
Khatello e tlase nako ea ho tsoa phoso	Metsotsoana	60	60	60	60
Boitšoaro ba Flush	–	Khatello e Phahameng	Ha ho Flush	Perm Flush	Phallo e tlase ea Phallo
Ho qala Flush: Metsotso ea ho qetela	Metsotso	0	0	0	0
Ho qala Flush: Nako	Metsotsoana	0	0	0	30
Periodic Flush: Karohano	Metsotso	60	0	0	0
Periodic Flush: Nako	Metsotsoana	30	0	0	0
Shutdown Flush: Nako ea ho tsoa ho qetela	Metsotso	10	0	0	0
Shutdown Flush: Ts'ebetso e nyane	Metsotso	30	0	0	0
Shutdown Flush: Nako	Metsotsoana	60	0	60	60
Idle Flush: Nako *	Metsotso	0	0	0	0
Idle Flush: Nako*	Metsotsoana	0	0	0	0

• Likarolo tsena li holofalitsoe ka ho sa feleng ka lebaka la monyetla oa pherekano ho basebelisi ba ho qetela tšimong. Li ka nolofalloa ha li hlokahala ka sebopeho sa lenaneo la OEM PC se lumellang liphetoho ho litekanyetso tsohle tse bontšitsoeng ka holimo.

Sehlomathiso C - Tiisetso e Lekanyelitsoeng ea Molaoli

Seo tiisetso e se koahelang:
CHIP e tiiselitsoe hore e se ke ea e-ba le mefokolo ea thepa le mosebetsi nakong ea tiisetso. Haeba sehlahisoa se bonahala se sa sebetse hantle nakong ea tiisetso, Nelsen Corporation ka boikhethelo ba eona e tla lokisa kapa e nkele sehlahisoa se tšoanang sebaka. Sehlahisoa se seng kapa likarolo tse ling li ka kenyelletsa likarolo tse nchafalitsoeng kapa tse nchafalitsoeng.

Tiisetso e sebetsa nako e kae:
CHIP e lokiselitsoe selemo se le seng (1) bakeng sa likarolo le mosebetsi ho tloha letsatsing la theko ea pele ea bareki kapa likhoeli tse 15 ho tloha ka letsatsi la sekepe, ho sa tsotellehe hore na ke efe e tlang pele.

Seo tiisetso e sa se koaheleng:

1. Tšenyo, ho senyeha kapa ho se sebetse hantle ho bakoang ke:
   1.  Tšebeliso e mpe ea kotsi, ho se tsotelle, mollo, lehalima la metsi kapa liketso tse ling tsa tlhaho, phetoho e sa lumelloeng ea sehlahisoa kapa ho se latele litaelo tse fanoeng le sehlahisoa.
   2. Ho lokisa kapa ho leka ho lokisoa ke mang kapa mang ea sa lumelloang ke Nelsen Corporation.
   3. Tšenyo efe kapa efe ea sehlahisoa ka lebaka la ho romelloa.
   4. E bakang kantle ho sehlahisoa joalo ka ho feto-fetoha ha matla a motlakase.
   5. Tšebeliso ea lisebelisoa kapa likarolo ha li kopane le litlhaloso tsa i-Controls.
   6. Ho qhoma ho tloaelehileng.
   7. Lebaka le leng le le leng le sa amaneng le bothata ba sehlahisoa.
2. Litšenyehelo tsa lipalangoang tse hlokahalang ho fumana litšebeletso tlas'a tiisetso ena.
3. Mosebetsi o mong ntle le oa feme.

Mokhoa oa ho fumana litšebeletso:

1. Ho fumana tšebeletso ea tiisetso, ikopanye le morekisi oa hau bakeng sa Return Material Authorization (RMA).
2. U tla tlameha ho fana ka:
   1. Lebitso la hao le aterese
   2. Tlhaloso ea bothata
3.  Kopanya molaoli ka hloko bakeng sa thomello 'me u e khutlisetse ho thepa ea hau e lefelloang esale pele.

Tekanyetso ea li-waranti tse boletsoeng:
Ha ho na litiisetso, tse hlahisitsoeng kapa tse boletsoeng, tse fetelang ka nqane ho tlhaloso e teng mona ho kenyeletsoa le tiisetso e boletsoeng ea thekiso le ho itekanela molemong o itseng.
Ntle le lits'enyehelo:
Boikarabello bo lekanyelitsoe ho litšenyehelo tsa ho lokisa kapa ho fetola sehlahisoa. Nelsen Corporation e ke ke ea ikarabella bakeng sa:

1. Tšenyo ea thepa e 'ngoe e bakiloeng ke bofokoli bofe kapa bofe sehlahisoa, tšenyo e ipapisitseng le tšitiso, tahlehelo ea ts'ebeliso ea sehlahisoa, tahlehelo ea nako, tahlehelo ea phaello, tahlehelo ea monyetla oa khoebo, tahlehelo ea kamohelo, ho kena-kenana le likamano tsa khoebo kapa tahlehelo e 'ngoe ea khoebo, leha a eletswa ka kgonahalo kapa tshenyo e jwalo.
2. Tšenyo leha e le efe e 'ngoe, ebang ke ea tšohanyetso, e bakoang kapa e seng joalo.
3. Kopo efe kapa efe khahlanong le moreki ke mokha ofe kapa ofe.

Phello ea molao oa naha:
Tiisetso ena e u fa litokelo tse khethehileng tsa molao, hape u ka ba le litokelo tse ling tse fapaneng ho ea ka linaha. Linaha tse ling ha li lumelle meeli ea litiisetso tse boletsoeng le/kapa ha li lumelle ho qheleloa ka thoko ho tšenyeho ea tšohanyetso kapa e bakiloeng, ka hona, meeli le mekhelo e kaholimo e kanna ea se sebetse ho uena.

 

Litokomane / Lisebelisoa

	NELSEN CHIP RO Controller System Controller Documentation [pdf] Buka ea Taelo Litokomane tsa Molaoli oa Tsamaiso ea CHIP RO, CHIP RO, Litokomane tsa Molaoli oa Tsamaiso ea Tsamaiso
	NELSEN CHIP RO Controller System Controller Documentation [pdf] Bukana ea Mosebelisi Litokomane tsa "ChiP RO Controller System Controller", CHIP RO, Litokomane tsa Molaoli oa Tsamaiso ea Tsamaiso, Litokomane tsa Molaoli, Litokomane

Litšupiso

• Bukana ea Mosebelisi