Litaba pata
1 LITLOA TSA SECHABA SCXI-1530 Mojule oa Kenyo ea Molumo le Vibration
2 Litaelo tsa Tšebeliso ea Sehlahisoa
3 Mohato oa 1. Hlakola Chassis, Module, le Lisebelisoa
4 Mohato oa 2. Netefatsa Likarolo
5 Mohato oa 3. Hlophisa Chassis
6 Mohato 4. Kenya Modules
7 Mohato oa 5. Kopanya li-Sensors le Signal Lines
8 Mohato oa 6. Hokela Terminal Blocks
9 Mohato oa 7. Kenya Adapter ea Cable
10 Mohato oa 8. Hokela Li-Module ho Sesebelisoa sa DAQ
11 Mohato oa 9. Matla Holima Chassis ea SCXI
12 Mohato oa 10. Netefatsa Hore Chassis le Li-Module li A Tsebahala
13 Mohato oa 11. Eketsa Chassis
14 Mohato oa 12. Lokisa Chassis le Modules
15 Mohato oa 13. Leka Chassis
16 Mohato oa 14. Nka Tekanyo ea NI-DAQmx
17 Lipotso Tse Botsoang Hangata
18 Litlhaloso
19 Litokomane / Lisebelisoa
19.1 Litšupiso
20 Related Posts

SECHABA-LITS'ELISO-logo

LITLOA TSA SECHABA SCXI-1530 Mojule oa Kenyo ea Molumo le Vibration

NATIONAL-INSTRUMENTS-SCXI-1530-Sound-and-Vibration-Input-Module-sehlahisoa-setšoantšo

Litlhaloso:

  • Lebitso la Sehlahiswa: SCXI-1530
  • Lebitso: SCXI
  • Mofuta: Signal Conditioning eExtensions for Instrumentation

Litaelo tsa Tšebeliso ea Sehlahisoa

  1. Mohato oa 1: Hlakola 'me u hlahlobe
    Tlosa chassis, mojule, le lisebelisoa ho sephutheloana. Sheba likarolo tse hlephileng kapa tšenyo. Se ke oa kenya sesebelisoa se senyehileng.
  2. Mohato oa 2: Netefatsa Likarolo
    Sheba setšoantšo sa likarolo tsa tsamaiso ho khetholla le ho netefatsa likarolo tsohle tse kenyelelitsoeng ka har'a sephutheloana.

Mohato oa 3: Theha Chassis

Ho theha Chassis ea SCXI:

  1. Tlosa 'me u ntše chassis.
  2. Haeba ho khoneha, beha aterese ea chassis ho latela litlhoko tsa hau.
  3. Latela litemoso tsa ESD pele u kenya hardware.

PXI/SCXI Combination Chassis Setup:

  1. Netefatsa hore molaoli oa sistimi o kentsoe lehlakoreng la PXI la chassis.
  2. Tlosa li-switches tsa PXI le SCXI ka bobeli, 'me u tlose thechassis.
  3. Beha li-switches tsa aterese ea chassis ea SCXI le voltage khetha tumbler ha ho hlokahala.

LBH:

  • P: Nka fumana lintlha kae tsa polokeho bakeng sa sesebelisoa?
    K: Tlhahisoleseding ea tšireletseho le melao ea tsamaiso e ka fumanoa litokomaneng tsa sesebelisoa tse pakiloeng le sehlahisoa sa hau, ho ni.com/manuals , kapa mecheng ea litaba ea NI-DAQmx e nang le litokomane tsa sesebelisoa.
  • P: Ke hlophisa mokhoa oa setso oa NI-DAQ (Legacy) joang?
    A: Sheba Traditional NI-DAQ (Legacy) Readme ka mor'a ho kenya software bakeng sa litaelo tsa tlhophiso.
  • P: Ke lokela ho etsa eng haeba sehlahisoa sa ka se bonahala se senyehile?
    A: Tsebisa NI haeba sehlahisoa se bonahala se senyehile 'me u se ke ua kenya sesebelisoa se senyehileng.

TŠEBELETSO E KAKARETSO
Re fana ka lits'ebeletso tsa tlholisano ea ho lokisa le ho lekanya, hammoho le litokomane tse fumanehang habonolo le lisebelisoa tse jarollotsoeng mahala.

REKETSENG TSALALA
Re reka likarolo tse ncha, tse sebelisitsoeng, tse felisitsoeng, le tse eketsehileng ho tsoa letotong le leng le le leng la NI. Re fumana tharollo e molemohali ho lumellana le litlhoko tsa hau ka bomong.
Thekiso ea ka Bakeng sa Chelete
Fumana Mokitlane
Fumana Tumellano ea Khoebo

OBSOLETE NI HARDWARE E LE STOCK & E LOKILE HO TSAMAETSOA
Re boloka New, New Surplus, Refurbished, le Reconditioned NI Hardware.

Ho koala sekheo
pakeng tsa moetsi le sisteme ea tlhahlobo ea lefa la hau.

1-800-915-6216
www.apexwaves.com
sales@apexwaves.com

Kopa a Qotsa TLANYA MONA SCXI-1530

SCXI Quick Start Guide

  • Signal Conditioning eExtensions for Instrumentation
  • Tokomane ena e na le litaelo tsa puo ea Senyesemane, Sefora le Sejeremane. Bakeng sa litaelo tsa puo ea Sejapane, Sekorea le Sechaena se Nolofalitsoeng, sheba tokomane e 'ngoe e ka har'a khiti ea hau.
  • Tokomane ena e hlalosa mokhoa oa ho kenya le ho lokisa li-module tsa boemo ba matšoao a SCXI ho SCXI-1000, SCXI-1001, SCXI-1000DC, kapa PXI / SCXI motsoako oa chassis, netefatsa hore mojule le chassis li sebetsa hantle, 'me li theha litsamaiso tsa multichassis. E boetse e hlalosa software ea NI-DAQmx e amanang le SCXI le lihlahisoa tse kopaneng tsa boemo ba matšoao.
  • Tokomane ena e nka hore u se u kentse, u hlophisitse, 'me u lekile sesebelisoa sa hau sa NI le software ea mokhanni, le sesebelisoa sa ho fumana data (DAQ) seo u tla hokela mojule oa SCXI ho sona. Haeba ha u so fumane, sheba litataiso tsa DAQ tsa ho Qala tse kenyellelitsoeng le sesebelisoa sa DAQ 'me li fumaneha ho NI-DAQ software media le ho tloha. ni.com/manuals , pele e tsoela pele.
  • Bakeng sa litaelo tsa ho hlophisa Traditional NI-DAQ (Legacy), sheba Traditional NI-DAQ (Legacy) Readme ka mor'a hore u kenye software. Sheba ho NI Switches Getting Started Guide, e fumanehang ho ni.com/manuals , bakeng sa lintlha tsa phetoho.

Mohato oa 1. Hlakola Chassis, Module, le Lisebelisoa

Tlosa chassis, mojule le sephutheloana ka har'a sephutheloana 'me u hlahlobe lihlahisoa bakeng sa likarolo tse hlephileng kapa letšoao lefe kapa lefe la tšenyo. Tsebisa NI haeba lihlahisoa li bonahala li senyehile ka tsela leha e le efe. Se ke oa kenya sesebelisoa se senyehileng.
Bakeng sa tlhahisoleseling mabapi le polokeho le melao ea tsamaiso, sheba litokomane tsa sesebelisoa tse pakiloeng le sesebelisoa sa hau, ho ni.com/manuals , kapa mecha ea litaba ea NI-DAQmx e nang le litokomane tsa sesebelisoa.

Matshwao a latelang a ka ba a le sesebedisweng sa hao.

  • NATIONAL-INSTRUMENTS-SCXI-1530-Sound-and-Vibration-Input-Module-fig- (1)Letšoao lena le fana ka tlhokomeliso, e u eletsang ka mehato eo u lokelang ho e nka ho qoba kotsi, tahlehelo ea data kapa ho senyeha ha sistimi. Ha letšoao lena le tšoailoe sehlahisoa, lebisa ho Tokomane ea Mpalle Pele: Tšireletseho le Tšebelisano ea Motlakase, e rometsoeng le sesebelisoa, bakeng sa mehato ea tšireletso.
  • NATIONAL-INSTRUMENTS-SCXI-1530-Sound-and-Vibration-Input-Module-fig- (2)Ha letšoao lena le tšoailoe sehlahisoa, le bolela temoso e u eletsang hore u nke mehato ea ho qoba ho tsosoa ke motlakase.
  • NATIONAL-INSTRUMENTS-SCXI-1530-Sound-and-Vibration-Input-Module-fig- (3)Ha letšoao lena le tšoauoa sehlahisoa, le bolela karolo e ka 'nang ea chesa. Ho ama karolo ena ho ka baka kotsi 'meleng.

Mohato oa 2. Netefatsa Likarolo

Etsa bonnete ba hore u na le motsoako o khethehileng oa likarolo tsa tsamaiso ea SCXI, e bontšitsoeng ho Lipalo 1 le 2, e hlokahalang bakeng sa kopo ea hau hammoho le lintho tse latelang:

  • NI-DAQ 7.x kapa hamorao software le litokomane
  • NI LabVIEW, NI LabWindows™/CVI™, NI LabVIEW SignalExpress, NI Measurement Studio, Visual C++, kapa Visual Basic
  • Litaelo tsa lihlahisoa tsa SCXI
  • 1/8 in. flathead screwdriver
  • Nomoro 1 le 2 Phillips screwdrivers
  • Li-strippers tsa terata
  • Lithako tse telele tsa nko

NATIONAL-INSTRUMENTS-SCXI-1530-Sound-and-Vibration-Input-Module-fig- (4)

  1. Terminal Block kapa TBX Accessories (Boikhethelo)
  2. Setšoantšo sa PXI
  3. Litefiso tsa SCXI
  4. PXI/SCXI Combination Chassis le Controller
  5. SCXI Chassis
  6. Mohala oa Matla oa Chassis

Setšoantšo sa 1. Likarolo tsa Tsamaiso ea SCXI

NATIONAL-INSTRUMENTS-SCXI-1530-Sound-and-Vibration-Input-Module-fig- (5)

  1. Kopano ea Chassis Cord le Adapter
  2. Sesebelisoa sa DAQ
  3. Cable ea USB
  4. Sesebelisoa sa USB sa SCXI

Setšoantšo sa 2. Bakeng sa Chassis ea SCXI Feela

Mohato oa 3. Hlophisa Chassis

  • Tlhokomeliso Buisana le 'Mme Pele: Tokomane ea Tšireletseho le Ts'ebetso ea Motlakase e kentsoeng ka chassis ea hau pele o tlosa likoahelo tsa lisebelisoa kapa o hokela kapa o hakolla mehala efe kapa efe ea matšoao. Latela litemoso tse nepahetseng tsa ESD ho netefatsa hore u theohile pele u kenya lisebelisoa.
  • O ka leka lits'ebetso tsa NI-DAQmx ntle le ho kenya lisebelisoa ka ho sebelisa sesebelisoa se etsisitsoeng sa NI-DAQmx. Bakeng sa litaelo mabapi le ho theha lisebelisoa tse etsisitsoeng tsa NI-DAQmx, ho Measurement & Automation Explorer, khetha Thuso»Lihlooho tsa Thuso»NI-DAQmx»MAX Thuso.
  • Sheba karolo ea Kamohelo ea Sesebelisoa sa Windows ka mor'a ho kenya sesebelisoa sa DAQ kapa sesebelisoa sa USB sa SCXI.

SCXI Chassis

  1. Tlosa 'me u ntše chassis.
  2. Beha aterese ea chassis haeba chassis ea hau e fumaneha habonolo. Li-chassis tse ling tsa khale ha li khonehe.
    1. Haeba chassis e na le li-switches tsa aterese, u ka beha chassis atereseng eo u e batlang. Ha o hlophisa chassis ho MAX mohatong oa 12, etsa bonnete ba hore litlhophiso tsa aterese ea software li lumellana le litlhophiso tsa aterese ea Hardware. Li-switches kaofela li bonts'itsoe li le boemong ba ho tingoa, li-setting tsa kamehla, ho Setšoantšo sa 3.
    2. Li-chassis tse ling tsa khale li sebelisa li-jumpers ka har'a phanele e ka pele ho fapana le li-switches tsa aterese ea chassis. Chassis ea khale e boetse e fapana ka li-fuse le khetho ea matla a AC. Sheba litokomane tsa chassis bakeng sa lintlha tse ling.
  3. Netefatsa litlhophiso tse nepahetseng tsa matla (100, 120, 220, kapa 240 VAC).
  4. Hokela thapo ea motlakase.

NATIONAL-INSTRUMENTS-SCXI-1530-Sound-and-Vibration-Input-Module-fig- (6)

  1. Pele
  2. Morao
  3. Phetoho ea Matla a Chassis
  4. Phetoho ea Aterese ea Chassis
  5. Moqtage Selection Tumbler
  6. Thapo ea Power Cord

Setšoantšo sa 3. SCXI Chassis Setup

PXI / SCXI Combination Chassis
U tlameha ho ba le molaoli oa sistimi e kentsoeng lehlakoreng la PXI la chassis. Sheba ni.com/info 'me u thaepe rdfis5 ho odara chassis e hlophisitsoeng ea PXI/SCXI.

  1. Tlosa li-switches tsa PXI le SCXI ka bobeli, 'me u lokolle chassis.
  2. Beha maemo a switjha a aterese ea chassis ea SCXI atereseng eo u e batlang. Setšoantšong sa 4, li-switches tsohle li bonts'oa li le boemong ba ho tima.
  3. Beha molumotage khetho tumbler ho vol e nepahetsengtage bakeng sa kopo ea hau. Sheba litokomane tsa chassis bakeng sa lintlha tse ling.
  4. Hokela thapo ea motlakase.

NATIONAL-INSTRUMENTS-SCXI-1530-Sound-and-Vibration-Input-Module-fig- (7)

  1. Pele
  2. Morao
  3. Moqtage Selection Tumbler
  4. Thapo ea Power Cord
  5. Phetoho ea Aterese
  6. Sesebelisoa sa matla sa SCXI
  7. Phetoho ea matla ea PXI
  8. Molaoli oa Sisteme

Setšoantšo sa 4. PXI / SCXI Combination Chassis Setup

Mohato 4. Kenya Modules

Tlhokomeliso Etsa bonnete ba hore chassis e tima ka botlalo. Li-module tsa SCXI ha li chesehe. Ho eketsa kapa ho tlosa li-module ha chassis e ntse e sebelisoa ho ka baka li-fuse tsa chassis kapa tšenyo ea chassis le li-module.

PXI / SCXI Combination Chassis
Ho kenya sesebelisoa sa puisano sa PXI DAQ sebakeng se nepahetseng ka ho fetesisa sa chassis ea PXI, tlatsa mehato e latelang:

  1. Tšoara karolo efe kapa efe ea tšepe ea chassis ho ntša motlakase o sa fetoheng.
  2. Beha likarolo tsa mojule ka holimo le tlase litataiso tsa mojule oa PXI, joalo ka ha ho bonts'itsoe ho Setšoantšo sa 5.
  3. Tsamaisa mojule ka morao ho chassis. Netefatsa hore sebapi sa ente/ejector se sutumelletsoa fatše.
  4. Ha o qala ho utloa ho hanyetsa, hula holim'a mofeng oa ente / ejector ho kenya mojule.
  5. Sireletsa mojule seporong se ka pele sa chassis u sebelisa li-screw tse peli.

NATIONAL-INSTRUMENTS-SCXI-1530-Sound-and-Vibration-Input-Module-fig- (8)

  1. PXI DAQ module
  2. Setshwara sa Injector/Ejector
  3. Seporo sa Injector/Ejector

Setšoantšo sa 5. Ho kenya PXI Module ho Chassis e Ncha

SCXI Chassis

  1. Tšoara karolo efe kapa efe ea tšepe ea chassis ho ntša motlakase o sa fetoheng.
  2. Kenya module ho SCXI slot.
  3. Sireletsa mojule ho chassis ka pele seporong se ntseng se hola ka li-thumbscrew tse peli.

NATIONAL-INSTRUMENTS-SCXI-1530-Sound-and-Vibration-Input-Module-fig- (9)

  1. Likokoana-hloko
  2. Mojule

Setšoantšo sa 6. Ho kenya SCXI Module ho Chassis e Ncha

Li-module tsa USB tsa SCXI
Li-module tsa USB tsa SCXI ke li-plug-and-play, li-modules tse kopantsoeng tsa boemo ba matšoao tse buisanang pakeng tsa tsamaiso ea SCXI le k'homphieutha e lumellanang le USB kapa hub ea USB, kahoo ha ho hlokahale sesebelisoa sa DAQ se mahareng. Li-module tsa USB tsa SCXI, joalo ka SCXI-1600, li ke ke tsa sebelisoa ka har'a chassis e kopaneng ea PXI/SCXI kapa lits'ebetsong tsa multichassis. Kamora ho kenya mojule ka chassis, tlatsa mehato ena:

  1. Hokela thapo ea USB ho tloha boema-kepe ba khomphutha kapa ho tloha setsing sefe kapa sefe sa USB ho ea koung ea USB ho mojule oa USB oa SCXI.
  2. Hokela thapo sebakeng sa ho imoloha ha khatello u sebelisa thae ea mohala.

NATIONAL-INSTRUMENTS-SCXI-1530-Sound-and-Vibration-Input-Module-fig- (10)

  1. K'homphieutha ea Motho
  2. USB Hub
  3. Cable ea USB
  4. Sesebelisoa sa USB sa SCXI

Setšoantšo sa 7. Ho kenya SCXI USB Module

Kenya Mojule ho Sisteme e teng ea SCXI
Hape o ka eketsa mojule ho sistimi e teng ea SCXI ka mokhoa oa multiplexed. Haeba sistimi ea hau e se e ntse e e-na le molaoli ea thehiloeng, kenya li-module tsa SCXI tse ling libakeng tse teng tsa chassis slots. Sheba Mohato oa 7. Kenya Adapter ea Cable ho fumana hore na ke mojule ofe o lokelang ho hokela adaptara ea thapo, haeba ho hlokahala.

NATIONAL-INSTRUMENTS-SCXI-1530-Sound-and-Vibration-Input-Module-fig- (11)

  1. Mojule o mocha oa SCXI
  2. E teng SCXI Mojule
  3. SCXI Chassis
  4. Sesebelisoa sa DAQ se teng

Setšoantšo sa 8. Ho kenya Mojule oa SCXI ho Tsamaiso e teng

Mohato oa 5. Kopanya li-Sensors le Signal Lines

Hokela li-sensor le mela ea matšoao ho terminal block, accessory, kapa module terminals bakeng sa sesebelisoa ka seng se kentsoeng. Tafole e latelang e thathamisa libaka tsa terminal/pinout.

Sebaka Mokhoa oa ho fihlella Pinout
MAX Tobetsa ka ho le letona lebitso la sesebelisoa tlas'a Lisebelisoa le Li-interfaces, ebe u khetha Lisebelisoa tsa Pinouts.
Tobetsa ka ho le letona lebitso la sesebelisoa tlas'a Lisebelisoa le Li-interfaces, ebe o kgetha Thuso»Litokomane tsa Sesebelisoa sa Marang-rang. Fesetere ea sebatli e buloa ho ni.com/manuals ka liphetho tsa patlo ea litokomane tse amehang tsa sesebelisoa.
Mothusi oa DAQ Khetha mosebetsi kapa mocha oa sebele, 'me u tobetse ho Setšoantšo sa Khokahano tab ya. Khetha mocha o mong le o mong oa sebele mosebetsing.
NI-DAQmx Thuso Khetha Qala» Tsohle Mananeo »National Lisebelisoa »NI-DAQ»NI-DAQmx Thusa.
ni.com/manuals Sheba litokomane tsa sesebelisoa.

Ho fumana lintlha ka li-sensor, sheba ho ni.com/sensors . Ho fumana leseli mabapi le li-sensor tse bohlale tsa IEEE 1451.4 TEDS, sheba ho ni.com/teds .

Mohato oa 6. Hokela Terminal Blocks

SCXI Chassis kapa PXI/SCXI Combination Chassis

  • Haeba o kentse li-module tsa ho kopanya ka ho toba, tlolela Mohato oa 7. Kenya Adapter ea Cable.
  • Hokela li-terminal blocks ka pele ho li-module. Sheba ni.com/products ho fumana hore na li-terminal block le li-module li sebetsa joang. Haeba u sebelisa "terminal block" ea TBX, sheba tataiso ea eona.

NATIONAL-INSTRUMENTS-SCXI-1530-Sound-and-Vibration-Input-Module-fig- (12)

  1. Li-module tse nang le Li-terminal Blocks tse kentsoeng
  2. Ho hokela Terminal Block ho SCXI Module
  3. SCXI Module Front Panels

Setšoantšo sa 9. Ho hokela Li-Terminal Blocks

Mohato oa 7. Kenya Adapter ea Cable

Sistimi e le 'ngoe ea Chassis
Haeba u kentse mochine oa USB oa SCXI, joalo ka SCXI-1600, kapa u sebelisa mochine oa motsoako oa PXI / SCXI, tlōla ho Mohato oa 9. Matla ho Chassis ea SCXI.

  1. Hlalosa mojule o nepahetseng oa SCXI ho hokela ho adaptara ea cable, joalo ka SCXI-1349. Haeba ho na le mojule oa ho kenya analoge ka nako e le 'ngoe sampbokhoni ba ling ka har'a chassis, o tlameha ho hokahanya mojule oo ho kopano ea cable, kapa molaetsa oa phoso o hlaha nako le nako ha o tsamaisa kopo ea hau.
    1. Haeba li-module kaofela li le maemong a mangata, fumana hore na ke li-module life tse hlahang pele lethathamong le latelang, 'me u hokele adaptara ea cable ho eona:
      1. SCXI-1520, SCXI-1530, SCXI-1531, SCXI-1540, SCXI-1140
      2. SCXI-1521/B, SCXI-1112, SCXI-1102/B/C, SCXI-1104/C, SCXI-1125, SCXI-1126, SCXI-1141, SCXI-1142, SCXI-1143, SCXI-1581
      3. SCXI-1120/D, SCXI-1121, SCXI-1100, SCXI-1122
      4. SCXI-1124, SCXI-116x
    2. Haeba sistimi ea hau e na le li-module tsa parallel le multiplexed, khetha "multiplexed controller" lethathamong le fetileng, 'me u hokele adaptara ea cable ho eona.
    3. Haeba li-module kaofela li le maemong a tšoanang, hokela adaptara ea thapo mojulung o mong le o mong. Li-module tse latelang li ka sebetsa ka mokhoa o ts'oanang: SCXI-1120 / D, SCXI-1121, SCXI-1125, SCXI-1126, SCXI-1140, SCXI-1141, SCXI-1142, SCXI-1143, SCXI-1520 SCXI-1530 , SCXI-1531
  2. Kenya khokahanyo ea basali ba 50-pin ka morao ho adaptara ea cable ka har'a sehokelo sa banna ba 50-pin ka morao ho mojule o loketseng oa SCXI.
    Tlhokomeliso U se ke ua qobella adaptara haeba ho na le khanyetso. Ho qobella adaptara ho ka koba lithakhisa.
  3. Tlamella adaptara ka morao ho chassis ea SCXI ka li-screws tse fanoeng ka SCXI-1349.

NATIONAL-INSTRUMENTS-SCXI-1530-Sound-and-Vibration-Input-Module-fig- (13)

  1. SCXI Chassis
  2. Adapter ea Cable ea SCXI-1349
  3. 68-Pin Shielded Cable
  4. Likokoana-hloko

Setšoantšo sa 10. Ho kenya Adapter ea Cable

Sistimi ea Multichassis

  • SCXI-1346 e akaretsa sehokelo se ka morao sa li-module tse peli. Neng viewha mochine oa mochine o tloha ka morao, mochine o ka letsohong le letona la mochine o kopantsoeng ka ho toba le SCXI-1346 o ke ke oa ba le thapo e ka ntle e kenngoa ka har'a sehokelo sa eona se ka morao sa 50-pin.
  • SCXI-1000 chassis ka ntlafatso D ha e na li-jumpers tsa aterese kapa li-switches mme e arabela atereseng efe kapa efe, empa u ke ke ua e sebelisa litsamaisong tsa multichassis. Revision E chassis sebelisa jumpers ho Slot 0 bakeng sa aterese ea chassis. Phetolelo ea F le chassis ea morao-rao e sebelisa sesebelisoa sa DIP bakeng sa aterese ea chassis.
  • SCXI-1000DC chassis ka ntlafatso ea C ha e na li-jumpers kapa li-switches mme e arabela atereseng efe kapa efe, empa u ke ke ua e sebelisa lits'ebetsong tsa multichassis. Phetolelo ea D 'me hamorao chassis e sebelisa li-jumpers ho Slot 0 bakeng sa aterese ea chassis.
  • SCXI-1001 chassis ka ntlafatso D sebelisa li-jumpers ho Slot 0 bakeng sa aterese ea chassis. Phetolelo ea E 'me hamorao chassis e sebelisa sesebelisoa sa DIP bakeng sa aterese ea chassis.
  • Ho hokahanya sistimi ea li-multichassis, o tlameha ho sebelisa adaptara e le 'ngoe ea SCXI-1346 bakeng sa chassis e' ngoe le e 'ngoe e ka har'a ketane ntle le chassis e hole le sesebelisoa sa puisano sa DAQ. Chassis ea ho qetela e sebelisa adaptara ea cable ea SCXI-1349.
  1. Hlalosa mojule o loketseng oa SCXI ho hokela ho adaptara ea thapo. Sheba mohato oa 1 oa karolo e fetileng ea Sistimi e le 'ngoe ea Chassis ho fumana mojule o nepahetseng.
  2. Kenya khokahanyo ea basali ba 50-pin ka morao ho adaptara ea cable ka har'a sehokelo sa banna ba 50-pin ka morao ho mojule o loketseng oa SCXI.
  3. Tlamella adaptara ka morao ho chassis ea SCXI ka li-screws tse fanoeng ka SCXI-1346.
  4. Pheta mehato ea 1 ho isa ho 3 bakeng sa chassis e 'ngoe le e' ngoe ea SCXI tsamaisong, ho sa kenyeletsoe chassis ea ho qetela ea SCXI ka ketane.NATIONAL-INSTRUMENTS-SCXI-1530-Sound-and-Vibration-Input-Module-fig- (14)
    1. SCXI-1000, SCXI-1001, kapa SCXI-1000DC Chassis
    2. Adapter ea Cable ea SCXI-1346
    3. Cable e Sirelelitsoeng E Hokela HO CHASSIS E LATELANG
    4. Cable e Sirelelitsoeng e Hokela ho HO TLOHA DAQ BOARD KAPA CHASSIS E FELE
      Setšoantšo sa 11. SCXI-1346 Cable Assembly
  5. Kenya adaptara ea thapo ea SCXI-1349 ho chassis ea ho qetela ea SCXI ka ketane. Sheba mohato oa 1 oa karolo e fetileng ea Sistimi e le 'ngoe ea Chassis bakeng sa litaelo tsa ho kenya SCXI-1349.

Mohato oa 8. Hokela Li-Module ho Sesebelisoa sa DAQ

Sistimi e le 'ngoe ea Chassis
Haeba u kentse li-module ka har'a mochine oa motsoako oa PXI / SCXI, sefofane sa morao sa PXI sa chassis se kopanya li-module le sesebelisoa sa DAQ.

  1. Haeba u sebelisa chassis ea SCXI, tlatsa mehato e latelang:
    1. Hokela pheletsong e le 'ngoe ea thapo e sirelelitsoeng ea 68-pin ho SCXI-1349.
    2. Hokela pheletsong e 'ngoe ea thapo ho sesebelisoa sa DAQ. Bakeng sa lisebelisoa tsa M Series, hokela thapo ho sehokelo 0.
  2. Haeba u sebelisa li-module ka mokhoa o ts'oanang, pheta mehato ea mojule ka 'ngoe le para ea lisebelisoa tsa DAQ.

Sistimi ea Multichassis

  1. Hokela ntlha e le 'ngoe ea thapo e sirelelitsoeng ea lipini tse 68 ho sesebelisoa sa puisano sa DAQ.
  2. Hokela pheletsong e 'ngoe ea thapo ho SCXI-1346 ka chassis ID n e ngotsoeng HO TSOA DAQ BOARD KAPA PREVIOUS CHASSIS.
  3. Hokela thapo e sirelelitsoeng ea liphini tse 68 ho SCXI-1346 ka chassis e ngotsoeng TO NEXT CHASSIS.
  4. Hokela pheletsong e 'ngoe ea thapo ho SCXI-1346 ka chassis ID n+1 e ngotsoeng HO TŠOA DAQ BOARD KAPA CHASSIS E FETILENG.
  5. Pheta mehato ea 3 le ea 4 bakeng sa chassis e setseng ho fihlela u fihla chassis ea ho qetela.
  6. Hokela thapo e sirelelitsoeng ea lipini tse 68 ho e haufi le chassis ea ho qetela sekoting se ngotsoeng TO NEXT CHASSIS.
  7. Hokela pheletsong e 'ngoe ea thapo ho SCXI-1349 ka chassis ea ho qetela.

NATIONAL-INSTRUMENTS-SCXI-1530-Sound-and-Vibration-Input-Module-fig- (15)

  1. Cable e Sirelelitsoeng e Hoketsoe ho Adapter ea Cable ea SCXI-1349
  2. Cable e Sirelelitsoeng e Hoketsoe ho Adapter ea Cable ea SCXI-1346
  3. Sesebelisoa sa DAQ
  4. Cable e Sirelelitsoeng ho Sesebelisoa sa DAQ
  5. Li-Terminal Blocks
  6. Li-sensor
  7. SCXI Chassis

Setšoantšo sa 12. Tsamaiso ea SCXI e phethiloeng

Mohato oa 9. Matla Holima Chassis ea SCXI

  • Haeba u sebelisa chesisi ea SCXI, sesebelisoa sa motlakase sa chassis se bontšoa ho Setšoantšo sa 3. Haeba u sebelisa mochine oa motsoako oa PXI/SCXI, li-switches tsa motlakase tsa PXI le tsa chassis li bontšoa ho Setšoantšo sa 4.
  • Ha molaoli a lemoha sesebelisoa sa USB joalo ka mojule oa SCXI-1600, LED e phaneleng e ka pele ea module ea panya kapa ea bonesa. Sheba litokomane tsa sesebelisoa bakeng sa litlhaloso tsa mohlala oa LED le lintlha tsa ho rarolla mathata.

Tlhokomeliso ea Sesebelisoa sa Windows
Liphetolelo tsa Windows pele ho Windows Vista li lemoha sesebelisoa leha e le sefe se sa tsoa kenngoa ha k'homphieutha e qala hape. Vista e kenya software ea sesebelisoa ka bo eona. Haeba Wizate e Fumanehang ea Hardware e bula, Kenya software ka bo eona joalo ka ha ho khothalelitsoe sesebelisoa ka seng.

NI Sesebelisoa sa Sesebelisoa

  • Kamora hore Windows e bone lisebelisoa tsa NI USB tse sa tsoa kenngoa, NI Device Monitor e sebetsa ka bo eona ha e qala.
  • Etsa bonnete ba hore letšoao la NI Device Monitor, le bonts'itsoeng ka letsohong le letšehali, lea bonahala sebakeng sa tsebiso sebakeng sa mosebetsi. Ho seng joalo, NI Device Monitor ha e bulehe. Ho bulela NI Device Monitor, notlolla sesebelisoa sa hau, qala hape NI Device Monitor ka ho khetha Start»All Programs»National Instruments» NI-DAQ»NI Device Monitor, ebe o hokela sesebelisoa sa hau.NATIONAL-INSTRUMENTS-SCXI-1530-Sound-and-Vibration-Input-Module-fig- (16)

NI Device Monitor e u khothaletsa ho khetha likhethong tse latelang. Likhetho tsena li ka fapana, ho latela lisebelisoa le software e kentsoeng tsamaisong ea hau.

  • Qala ho lekanya ka Sesebelisoa sena U sebelisa NI LabVIEW SignalExpress - E bula mohato oa NI-DAQmx o sebelisang liteishene tse tsoang sesebelisoa sa hau ho LabVIEW SignalExpress.
  • Qala Kopo ka Sesebediswa Sena—E Tseba LabVIEW. Khetha khetho ena haeba u se u hlophisitse sesebelisoa sa hau ho MAX.
  • Matha liphanele tsa liteko-E hlahisa liphanele tsa liteko tsa MAX bakeng sa sesebelisoa sa hau.
  • Hlophisa le ho Lekola Sesebediswa Sena—E Bula MAX.
  • U se ke Ua Etsa Ketso-E lemoha sesebelisoa sa hau empa ha e hlahise sesebelisoa.

Lintlha tse latelang li fumaneha ka ho tobetsa ka ho le letona letšoao la NI Device Monitor:

  • Matha ho Startup-E matha NI Device Monitor ha e qala sistimi (ka ho sa feleng).
  • Hlakola Mekhatlo eohle ea Lisebelisoa—Khetha ho hlakola liketso tsohle tse behiloeng ke Lebokose la ho hlahloba la Kamehla Nka Ketso Ena lebokoseng la puisano la ho itlhahisa ka sesebediswa.
  • Koala-E tima NI Device Monitor. Ho bulela NI Device Monitor, khetha Qala»Mananeo kaofela»Lisebelisoa tsa Naha»NI-DAQ»NI Device Monitor.

Mohato oa 10. Netefatsa Hore Chassis le Li-Module li A Tsebahala

Qetella mehato e latelang:

  1. Tobetsa habeli letšoao la Measurement & Automation komporong ea hau ho bula MAX.NATIONAL-INSTRUMENTS-SCXI-1530-Sound-and-Vibration-Input-Module-fig- (17)
  2. Atolosa Lisebelisoa le Li-interface ho netefatsa hore sesebelisoa sa hau se fumanoe. Haeba u sebelisa sepheo sa RT se hole, eketsa Sistimi ea Remote, fumana le ho holisa sepheo sa hau, ebe u holisa Lisebelisoa le Litšebelisano.

NATIONAL-INSTRUMENTS-SCXI-1530-Sound-and-Vibration-Input-Module-fig- (18)

  1. Ha sesebelisoa se tšehetsoa ke Traditional NI-DAQ (Legacy) le NI-DAQmx 'me ka bobeli li kentsoe, sesebelisoa se tšoanang se thathamisitsoe ka lebitso le fapaneng tlasa My System»Devices and Interfaces.
  2. Ke lisebelisoa tsa NI-DAQmx feela tse thathamisitsoeng tlas'a Remote Systems»Lisebelisoa le li-interfaces.

Haeba sesebelisoa sa hau se sa thathamisoa, tobetsa ho nchafatsa MAX. Haeba sesebelisoa se ntse se sa tsejoe, sheba ho ni.com/support/daqmx .

Mohato oa 11. Eketsa Chassis

Khetholla PXI Controller
Haeba u sebelisa chassis e kopaneng ea PXI/SCXI, tlatsa mehato e latelang ho tsebahatsa selaoli se kentsoeng sa PXI se kentsoeng chassis ea hau.

  1. Tobetsa ka ho le letona ho Sisteme ea PXI ebe u khetha Tseba joalo ka. Haeba u sebelisa sepheo sa RT se hole, eketsa Sistimi ea Remote, fumana le ho holisa sepheo sa hau, ebe u tobetsa PXI System ka ho le letona.
  2. Khetha molaoli oa PXI lethathamong.

Kenya Chassis ea SCXI
Haeba o kentse mojule oa USB oa SCXI, joalo ka SCXI-1600, tlolela Mohato oa 12. Lokisa Chassis le Modules. Mojule oa USB oa SCXI le chassis e amanang le eona e hlaha ka bo eona tlasa Lisebelisoa le Litšebelisano.

Ho kenya chassis, tlatsa mehato e latelang.

  1. Tobetsa ka ho le letona ho Lisebelisoa le Li-interface ebe u khetha Etsa Tse Ncha. Haeba u sebelisa sepheo sa RT se hole, eketsa Sistimi ea Remote, fumana le ho holisa sepheo sa hau, tobetsa ka ho le letona ho Lisebelisoa le Li-interfaces, ebe u khetha Etsa Ncha. Fesetere ea Create New e ea bula.
  2. Khetha chassis ea SCXI.
  3. Tobetsa Qetella.

Ntle le moo, o ka tobetsa ka ho le letona lisebelisoa le li-interfaces ebe u khetha chassis ea hau ho New» NI-DAQmx SCXI Chassis.

Mohato oa 12. Lokisa Chassis le Modules

  • Haeba u lokisa chassis ka SCXI-1600, tobetsa ka ho le letona ho chassis, khetha Properties, 'me u tlōle ho ea mohato oa 6 oa karolo ena. SCXI-1600 e iphumanela li-module tse ling kaofela.
  • Qetella mehato e latelang joalokaha ho bontšitsoe litšoantšong. Li-callouts tse nang le linomoro lipalong li lumellana le linomoro tsa mehato.
  1. Khetha sesebelisoa sa DAQ se kentsoeng mochineng oa puisano oa SCXI ho tsoa ho Chassis Communicator. Haeba MAX e lemoha sesebelisoa se le seng feela sa DAQ, sesebelisoa se khethoa ka boiketsetso, 'me khetho ena e koetsoe.NATIONAL-INSTRUMENTS-SCXI-1530-Sound-and-Vibration-Input-Module-fig- (19)
  2. Khetha sekotjana sa module se hokahaneng le sebui sa chassis ho tsoa ho Communicating SCXI Module Slot.
  3. Kenya maemo a aterese ea chassis ho Aterese ea Chassis. Etsa bonnete ba hore maemo a lumellana le maemo a aterese ho chassis ea SCXI.
  4. Khetha hore na o tla iphumanela li-module tsa SCXI. Haeba o sa iponele li-module, MAX e tima Communicating SCXI Module Slot.
  5. Tobetsa Boloka. Fesetere ea SCXI Chassis Configuration ea bula. Thebo ea Module e khethoa ka mokhoa oa kamehla.NATIONAL-INSTRUMENTS-SCXI-1530-Sound-and-Vibration-Input-Module-fig- (20)
  6. Haeba u sa ka ua iphumanela li-module, khetha mojule oa SCXI ho tsoa lebokoseng la lenane la Module Array. Etsa bonnete ba hore o totobatsa mojule sebakeng se nepahetseng.
  7. Tobetsa sebakeng sa Sekhetho sa Sesebelisoa 'me u kenye ID e ikhethang ea alphanumeric ho fetola lebitso la mojule oa SCXI. MAX e fana ka lebitso la kamehla bakeng sa Sekhetho sa Sesebelisoa.
  8. Haeba o sebelisa sesebediswa se hoketsweng, se hlalose ho Sesebediswa.
  9. Tobetsa Lintlha. Fesetere ea Lintlha ea bula.NATIONAL-INSTRUMENTS-SCXI-1530-Sound-and-Vibration-Input-Module-fig- (21)
  10. Haeba u ntse u lokisa mojule oa SCXI ka li-setting tse ka khethoang ke jumper, tobetsa tab ea Jumpers 'me u kenye li-setting tse khethiloeng tsa hardware.
  11. Tobetsa tab ya Accessory. Kgetha sesebediswa se tsamaellanang sa mojule ho tswa ho Lebokose la lenane le theohang la Sesebediswa.
  12. Tobetsa Configure ho lokisa litlhophiso tsa lisebelisoa. Ha se lisebelisoa tsohle tse nang le li-setting. Sheba litokomane tsa lisebelisoa bakeng sa lintlha tse ling.
  13. Haeba u sebelisa mochine oa ho kenya analoge ka mokhoa o ts'oanang, ka tlhophiso ea multichassis, kapa tlhophiso e 'ngoe e khethehileng, tobetsa konopo ea Cabling ho lokisa litlhophiso tsa cabling. Haeba o sebelisa mokhoa o tloaelehileng oa multiplexed mode, ha ho hlokahale hore u fetole litlhophiso.
  14. Khetha sesebelisoa sa DAQ se hoketsoeng mojuleng oa SCXI ho tsoa ho Ke sesebelisoa sefe se hokelang mojuleng ona? lethathamo.
  15. Khetha sesebelisoa sa DAQ ho tsoa lenaneng la Module Digitizer.
    1. Ka mokhoa oa multiplexed, o ka khetha mojule o fapaneng hore e be digitizer ea module. Haeba module e sebetsa ka mokhoa oa multiplexed, etsa bonnete ba hore mokhoa oa Multiplexed digitization o khethiloe.
    2. Ka mokhoa o ts'oanang, sesebelisoa se hokahaneng le module le digitizer ea module lia tšoana. Haeba module e sebetsa ka mokhoa o ts'oanang, etsa bonnete ba hore ho khethiloe mokhoa oa Parallel digitization.
  16. Khetha Mokhoa oa Digitization.
    1. Bakeng sa Multiplexed mode, khetha nomoro ea index ho tsoa lebokoseng le theohang la Multichassis Daisy-Chain Index.
    2. Bakeng sa Parallel mode, khetha mefuta e mengata ea liteishene ho tsoa lebokoseng le theohang la Digitizer Channel. Haeba sesebediswa se nang le thapo se na le sehokelo se le seng feela, mefuta e fapaneng ya dikanale e kgethwa ka boyona.
    3. Hlokomela Lisebelisoa tse ling tsa M Series li na le lihokelo tse peli. O tlameha ho khetha mefuta e mengata ea likanale tse tsamaellanang le sehokelo se kebelloang mojuleng. Dikanale 0–7 di tsamaelana le sehokedi 0. Dikanale 16–23 di tsamaelana le sehokedi 1.
    4. Tlhokomeliso Haeba o tlosa chassis ho ketane ea daisy, abela botjha boleng ba index bakeng sa dimojule ho chassis e 'ngoe. Ho fana ka boleng bo bocha ho boloka botsitso mme ho thibela ho sebetsana le chassis e tlositsoeng.
  17. Tobetsa OK ho amohela li-setting, koala fensetere ea Lintlha, 'me u khutlele ho SCXI Chassis Configuration fensetere.
  18. Haeba o kentse mojule o fetang o le mong, pheta ts'ebetso ea tlhophiso ho tloha mohatong oa 6 ka ho khetha mojule o nepahetseng oa SCXI ho tsoa lebokoseng le latelang la lenane la Module Array.
  19. Haeba o hloka ho fetola litlhophiso life kapa life tsa chassis, tobetsa konopo ea Chassis.NATIONAL-INSTRUMENTS-SCXI-1530-Sound-and-Vibration-Input-Module-fig- (22)
  20. Tobetsa OK ho amohela le ho boloka litlhophiso tsa chassis ena.
    Molaetsa o kaholimo ho fensetere ea SCXI Chassis Configuration o bonts'a boemo ba tlhophiso. O ke ke wa boloka tlhophiso ya chassis haeba phoso e hlaha ho fihlela o qeta ho kenya tlhahisoleseding ya mojule. Haeba temoso e hlaha, o ka boloka tlhophiso, empa NI e khothaletsa hore o lokise mohloli oa temoso pele.
  21. Bakeng sa lisensara tsa IEEE 1451.4 transducer electronic data sheet (TEDS) le lisebelisoa, lokisa sesebelisoa 'me u kenye lisebelisoa tse hlalositsoeng mehatong ena. Ho lokisa li-sensor tsa TEDS tse kentsoeng ka mohala ka kotloloho ho sesebelisoa, ho MAX, tobetsa ka ho le letona ho module tlasa Lisebelisoa le Li-interfaces ebe u khetha Lokisa TEDS. Tobetsa Scan bakeng sa HW TEDS fensetereng ea tlhophiso.

Kenya li-Module ho Sisteme e teng
Qetella mehato e latelang:

  1. Atolosa Lisebelisoa le Li-interface. Haeba u sebelisa sepheo sa RT se hole, eketsa Sistimi ea Remote, fumana le ho holisa sepheo sa hau, 'me u tobetse ka ho le letona Lisebelisoa le Li-interfaces.
  2. Tobetsa chassis ho hlahisa lethathamo la li-slots.
  3. Tobetsa ka ho le letona sekotjana se se nang letho ebe u khetha Kenya. Fesetere ea SCXI Chassis Configuration ea bula.
  4. Tobetsa Auto-Bona li-module tsohle 'me E.
  5. Ho qala ka mohato oa 6 ho tloha Mohato oa 12. Lokisa Chassis le Modules, qala ho hlophisa mojule.
  6. Lekola chassis, joalo ka ha ho hlalositsoe Mohatong oa 13. Leka Chesisi.

Mohato oa 13. Leka Chassis

  1. Atolosa Lisebelisoa le Li-interface.
  2. Tobetsa ka ho le letona lebitso la chassis ho leka.
  3. Khetha Teko ho netefatsa hore MAX e hlokomela chassis. Molaetsa o hlalosa ha chesi e sa tsejoe.
  • Ho leka ho kenngwa ka katleho ha mojule ka mong, tobetsa mojule oo o batlang ho o leka ka ho le letona ebe o tobetsa Liphanele tsa Teko. Ha SCXI-1600 e lekoa, e netefatsa tsamaiso eohle ea SCXI.
  • Lebokose la Lintlha tsa Phoso le bonts'a liphoso tseo tlhahlobo e kopanang le tsona. Letšoao la mojule sefateng sa sesebelisoa le tala haeba u kentse module ka katleho. Sistimi ea SCXI joale e tlameha ho sebetsa hantle. Kwala phanele ya teko.
  • Lekola lits'ebetso tsa NI-DAQmx ntle le ho kenya lisebelisoa u sebelisa NI-DAQmx e etsitseng chassis ea SCXI le li-module, ho sa kenyeletsoe SCXI-1600. Sheba Thuso ea Measurement & Automation Explorer bakeng sa NI-DAQmx ka ho khetha Thuso»Lihlooho tsa Thuso»NI-DAQ»MAX Help for NI-DAQmx bakeng sa litaelo mabapi le ho theha lisebelisoa tse etsisitsoeng tsa NI-DAQmx le ho reka kantle ho naha.
  • NI-DAQmx e etsisitse meralo ea sesebelisoa ho lisebelisoa tsa 'mele.

Haeba tlhahlobo e fetileng e sa ka ea netefatsa hore chassis e hlophisitsoe hantle ebile e sebetsa, sheba tse latelang ho rarolla tlhophiso ea SCXI:

  • Haeba lebokose la molaetsa la Verify SCXI Chassis le buleha le bonts'a nomoro ea mohlala ea chassis ea SCXI, ID ea Chassis: x, le molaetsa o le mong kapa ho feta o bolelang Nomoro ea Slot: x Configuration e na le module: SCXI-XXXX kapa 1600, hardware in chassis ke: Ha ho letho, nka tse latelang. ts'ebetso ea ho rarolla bothata:
    • Etsa bonnete ba hore chassis ea SCXI e buletsoe.
    • Etsa bonnete ba hore li-module tsohle tsa SCXI li kentsoe ka nepo ka har'a chassis joalo ka ha ho hlalositsoe pejana.
    • Etsa bonnete ba hore thapo ea USB lipakeng tsa SCXI-1600 le komporo e hoketsoe hantle.
  • Kamora ho sheba lintho tse tlang pele, leka hape chassis ea SCXI.
  • Haeba SCXI-1600 e sa fumanoe, tlatsa mehato e latelang:
    • Tobetsa ho nchafatsa MAX.
    • Netefatsa hore SCXI-1600 Ready LED e botala bo khanyang. Haeba LED e se botala bo khanyang, tima chassis, ema metsotsoana e mehlano, 'me u bone matla holim'a chassis.

Haeba mehato ena e sa atlehe ho lokisa sistimi ea SCXI, ikopanye le NI Technical Support ho ni.com/support bakeng sa thuso.

Mohato oa 14. Nka Tekanyo ea NI-DAQmx

Mohato ona o sebetsa feela ha o ntse o hlophisa sesebelisoa sa hau o sebelisa software ea NI-DAQ kapa NI. Sheba ho Nka Tekanyo ea NI-DAQmx ho Tataiso ea ho Qala ea DAQ bakeng sa tlhahisoleseling.

Sebelisa Mosebetsi oa Hao ho Kopo
Sheba Tataiso ea ho Qala ea DAQ bakeng sa tlhahisoleseling.

Ho batle phoso
Karolo ena e na le malebela a ho rarolla mathata le likarabo tsa lipotso tseo basebelisi ba SCXI ba atisang ho li botsa basebetsi ba tšehetso ea tekheniki ea NI.

Malebela
Pele o ikopanya le NI, leka malebela a latelang a ho rarolla mathata:

  • Haeba u na le mathata a ho kenya software ea hau, e ea ho ni.com/support/daqmx . Bakeng sa ho rarolla mathata a hardware, ea ho ni.com/support , kenya lebitso la sesebediswa sa hao, kapa eya ho ni.com/kb .
  • Eya ho ni.com/info 'me u kenye rddq8x bakeng sa lethathamo le felletseng la litokomane tsa NI-DAQmx le libaka tsa tsona.
  • Haeba o hloka ho khutlisa li-Hardware tsa hau tsa Naha bakeng sa ho lokisoa kapa ho lokisoa ha sesebelisoa, sheba ho ni.com/info ebe o kenya khoutu ea lintlha rdsenn ho qala ts'ebetso ea Return Merchandise Authorization (RMA).
  • Etsa bonnete ba hore chassis ea SCXI e buletsoe. Haeba u sebelisa chassis e kopaneng ea PXI/SCXI, etsa bonnete ba hore chassis ea PXI e buletsoe.
  • Etsa bonnete ba hore u kentse mofuta oa morao-rao oa software ea NI-DAQ e tšehetsang lisebelisoa tse tsamaisong ea hau.
  • Haeba MAX e sa khone ho theha puisano le chassis, leka e 'ngoe kapa tse latelang kaofela:
    • Hokela sesebelisoa sa DAQ mojuleng o fapaneng ka har'a chassis.
    • Leka ho kopanya lithapo tse fapaneng.
    • Leka chassis e fapaneng.
    • Leka sesebelisoa se fapaneng sa DAQ.
  • Etsa bonnete ba hore chassis ka 'ngoe ea SCXI e hoketsoeng sesebelisoa se le seng sa DAQ e na le aterese e ikhethang.
  • Etsa bonnete ba hore thapo e hoketsoe ka mokhoa o sireletsehileng ho chassis.
  • Sheba lithakhisa tse kobehileng mojuleng, sefofane sa chassis se ka morao, le sehokelo sa sesebelisoa.
  • Haeba u na le li-module tse ngata tsa SCXI, tlosa li-module tsohle 'me u leke mojule ka mong ka bonngoe.
  • Haeba u bala lintlha tse fosahetseng ho tsoa mohloling oa lets'oao, khaola mohloli oa lets'oao 'me u khutsufatse mocha oa ho kenya fatše. U lokela ho bala 0 V.
  • Ntle le moo, hokela betri kapa mohloli o mong o tsejoang oa lets'oao le kanaleng la ho kenya.
  • Matha example lenaneo ho bona hore na u ntse u fumana liphetho tse fosahetseng.

Lipotso Tse Botsoang Hangata

  • Chassis ea ka e buletsoe, 'me li-module tsa ka li lokiselitsoe mokhoa oa multiplexed, empa ha ke fumane data e ntle mocha ofe kapa ofe. Bothata boo bo bakoa ke eng?
  • Chassis ea SCXI e na le li-fuse tsa backplane, tse kopantsoeng ho 1.5 A ho chassis ea SCXI-1000 le ho 4 A ho chassis ea SCXI-1001. Fuse e le 'ngoe kapa ka bobeli li ka foka.
  • Ho SCXI-1600, o ka tseba hore na li-fuse li foka ka ho sheba li-LED tsa matla. Li-LED tsa motlakase ka bobeli ho SCXI-1600 le LED e ho chassis li tlameha ho bonesoa. Haeba leha e le efe ea li-LED li sa bonesoa, fuse e le 'ngoe kapa ka bobeli lia foka.
  • Ho SCXI-1000, li-fuse tsa backplane li fumaneha ka morao ho fan. Ho SCXI-1001, li-fuse tsa backplane li fumaneha ka morao ho fan ea letsoho le letona, haufi le mojule oa ho kenya matla, joalo ka. viewed ho tsoa ka morao ho chassis.
  • Qetella mehato e latelang ho hlahloba le/kapa ho fetola li- fuse.
  1. Tlosa chassis 'me u tlose thapo ea motlakase.
  2. Tlosa li-screws tse 'nè tse sireletsang fene le sefa ka morao ho chassis. Ha o tlosa screw ea ho qetela, ela hloko ho tšoara fene ho qoba ho roba lithapo tsa fan.
  3. Ho fumana hore na fuse e butsoe, hokela ohmmeter ka mose ho li-lead. Haeba 'malo o sa lekana 0 Ω, tlosa fuse. Fuse e tšoailoeng ka koporo + ka mokokotlong ke bakeng sa phepelo e ntle ea analoge, 'me fuse e tšoailoeng ka koporo - ke bakeng sa phepelo e mpe ea analoge.
  4. U sebelisa lisebelisoa tsa nko e telele, tlosa fuse ka hloko.
  5. Nka fuse e ncha 'me u kobe lithapo tsa eona e le hore karolo e be bolelele ba 12.7 mm (0.5 in.) - boholo bo pakeng tsa li-sockets tsa fuse-'me u khomarele lithapo ho bolelele ba 6.4 mm (0.25 in.).
  6. U sebelisa lisebelisoa tsa nko e telele, kenya fuse ka har'a masoba a sokete.
  7. Pheta mehato ea 3 ho isa ho ea 6, ha ho hlokahala, bakeng sa fuse e 'ngoe.
  8. Lokisa sefene le sefe le masoba a fene, ho etsa bonnete ba hore lehlakore la leibole le shebile fatše. Kenya hape li-screws tse 'nè' me u netefatse hore kopano e sireletsehile.

Sheba libuka tsa mosebelisi oa chassis bakeng sa litlhaloso tsa fuse.

  • Chassis ea ka e ile ea sebetsa ho fihlela ke tlosa mojule ka boomo mme ka kenya mochini ha chesi e ntse e buloa. Hona joale chassis ea ka ha e sebetse. Nka etsa eng?
    Li-module tsa SCXI ha li khone ho cheseha, kahoo e ka 'na eaba u phatlotse fuse ea chassis. Haeba ho nkela fuse sebaka ho sa lokise bothata, mohlomong u sentse potoloho ea libese tsa dijithale kapa mojule oa SCXI. Ikopanye le NI Support Technical ho ni.com/support bakeng sa thuso.
  • MAX ha e tsebe chassis ea ka ha ke etsa tlhahlobo. Nka etsa eng?
    Sheba lintho tse latelang:
    • Netefatsa hore chassis e buletsoe.
    • Netefatsa hore chassis e kentsoe mohala ka nepo sesebelisoa sa DAQ. Haeba lisebelisoa tse fetang bonngoe tsa DAQ li kentsoe khomphuteng ea hau, netefatsa hore sesebelisoa se khethiloeng bakeng sa Chassis Communicator se hlile se hokahane le chassis.
    • Sheba li-backplane pins ho bona hore na ho na le tse kobehileng nakong ea ho kenya li-module.
    • Netefatsa ho beoa le ho hlophisoa ha li-module tse nepahetseng. Haeba u sa ka ua bona li-modules, li-module tse kentsoeng ka har'a chassis li kanna tsa se ke tsa hlophisoa ho software.
    • Ntle le moo, li-module tse hlophisitsoeng ka har'a software li kanna tsa se ts'oane le tse kentsoeng ka har'a chassis.
  • Likanale tsa ka kaofela li phaphamala ho ea tseleng e nepahetseng ha ke leka ho lekanya. Ke lokisa bothata joang?
    Etsa bonnete ba hore litlhophiso tsa litšupiso tsa matšoao bakeng sa sesebelisoa sa DAQ li lumellana le mojule oa SCXI. Bakeng sa mohlalaample, haeba sesebelisoa se lokiselitsoe NRSE, etsa bonnete ba hore mojule oa cabled SCXI o arolelana tlhophiso e tšoanang. Litlhophiso tse nyallanang li ka hloka phetoho ho maemo a jumper a module.
  • Ke sebelisa e 'ngoe ea li-module tse latelang-SCXI-1100, SCXI-1102/B/C, SCXI-1112, kapa SCXI-1125-ka e' ngoe ea li-terminal blocks tse latelang-SCXI-1300, SCXI-1303, kapa SCXI-1328 - ho lekanya mocheso ka thermocouple. Nka thibela 'malo oa thermocouple joang hore o se ke oa fetoha?
    Karolelano ea lipalo tsa mocheso ho fokotsa ho fetoha. Hape, etsa bonnete ba mekhoa e nepahetseng ea wiring ea tšimo. Boholo ba li-thermocouples ke mehloli ea matšoao a phaphametseng a nang le matla a tlase a tloaelehilengtage; ba hloka tsela bakeng sa maqhubu a leeme ho tsoa mojuleng oa SCXI ampho lisa fatše. Etsa bonnete ba hore u thehile lead e fosahetseng ea thermocouple e 'ngoe le e 'ngoe e phaphametseng ka sehanyetsi. Sheba litokomane tsa "terminal block" bakeng sa litekanyetso tsa impedance. Bakeng sa li-thermocouples tse thehiloeng fatše, etsa bonnete ba hore ha ho na molumo o phahameng oa mokhoa o tloaelehilengtage teng holima thermocouple ground reference.

Tšehetso ea Theknoloji ea Lefatše Lohle

  • Bakeng sa tšehetso e eketsehileng, sheba ho ni.com/support or ni.com/zone . Bakeng sa tlhaiso-leseling e batsi bakeng sa lihlahisoa tsa mats'oao, sheba tokomane ea Tlhahisoleseding ea Theknoloji e pakiloeng le sesebelisoa sa hau.
  • Ntlo-kholo ea khoebo ea National Instruments e 11500 North Mopac Expressway, Austin, Texas, 78759-3504. National Instruments e boetse e na le liofisi tse teng lefatšeng ka bophara ho thusa ho sebetsana le litlhoko tsa hau tsa tšehetso.

Litlhaloso

Polokeho

  • Lihlahisoa tsena li fihlela litlhoko tsa litekanyetso tse latelang tsa polokeho bakeng sa lisebelisoa tsa motlakase bakeng sa tekanyo, taolo le ts'ebeliso ea laboratori:
    • IEC 61010-1, EN 61010-1
    • UL 61010-1, CSA 61010-1
  • Hlokomela Bakeng sa UL le litifikeiti tse ling tsa polokeho, sheba leibole ea sehlahisoa kapa karolo ea Setifikeiti sa Sehlahisoa sa Marang-rang.

Tšebelisano ea Motlakase
Sehlahisoa sena se fihlela litlhoko tsa litekanyetso tse latelang tsa EMC bakeng sa lisebelisoa tsa motlakase bakeng sa tekanyo, taolo le ts'ebeliso ea laboratori:

  • EN 61326 (IEC 61326): Mesi ea Sehlopha sa A; Tšireletso ea motheo
  • EN 55011 (CISPR 11): Sehlopha sa 1, likhahla tsa Sehlopha sa A
  • AS/NZS CISPR 11: Sehlopha sa 1, Mesi ea Sehlopha sa A
  • FCC 47 CFR Karolo ea 15B: Mesi ea Sehlopha sa A
  • ICES-001: Mesi ea Sehlopha sa A

Hlokomela Bakeng sa litekanyetso tse sebelisoang ho lekola EMC ea sehlahisoa sena, sheba karolo ea Setifikeiti sa Sehlahisoa sa Marang-rang.
Hlokomela Bakeng sa ho latela melao ea EMC, sebelisa sehlahisoa sena ho latela litokomane.
Hlokomela Ho latela melao ea EMC, sebelisa sesebelisoa sena ka likhoele tse sirelelitsoeng.

Ho lumellana ha CENATIONAL-INSTRUMENTS-SCXI-1530-Sound-and-Vibration-Input-Module-fig- (23)
Sehlahisoa sena se kopana le litlhoko tsa bohlokoa tsa Litaelo tsa Europe tse sebetsang ka tsela e latelang:

  • 2006/95/EC; Molumo o tlasetage Directive (tšireletseho)
  • 2004/108/EC; Taelo e lumellanang ea Motlakase (EMC)

Setifikeiti sa Sehlahisoa sa Marang-rang
Hlokomela Sheba sehlahisoa sa Declaration of Conformity (DoC) bakeng sa tlhahisoleseling efe kapa efe ea tlatsetso ea taolo ea melao. Ho fumana litifikeiti tsa sehlahisoa le DoC bakeng sa sehlahisoa sena, etela ni.com/certification , batla ka nomoro ea mohlala kapa mohala oa sehlahisoa, 'me u tobetse sehokelo se loketseng kholomong ea Setifikeiti.

Tsamaiso ea Tikoloho

  • National Instruments e ikemiseditse ho rala le ho etsa dihlahiswa ka mokgwa o nang le boikarabelo tikolohong. NI e hlokomela hore ho tlosa lintho tse ling tse kotsi lihlahisoa tsa rona ha ho na thuso ho tikoloho feela empa le ho bareki ba NI.
  • Bakeng sa lintlha tse ling tsa tikoloho, sheba NI le Tikoloho Web leqepheng la ho ni.com/environment . Leqephe lena le na le melaoana le litaelo tsa tikoloho tseo NI e li ikobelang, hammoho le lintlha tse ling tsa tikoloho tse sa kenyelletsoeng tokomaneng ena.

Thepa ea Matla a Motlakase le Elektronike (WEEE)
NATIONAL-INSTRUMENTS-SCXI-1530-Sound-and-Vibration-Input-Module-fig- (24)EU Customers Qetellong ea potoloho ea bophelo ba sehlahisoa, lihlahisoa tsohle li tlameha ho romelloa setsing sa WEEE sa recycling. Bakeng sa tlhaiso-leseling e batsi mabapi le litsi tsa ntlafatso tsa WEEE, matsapa a National Instruments WEEE, le ho latela melaoana ea WEEE 2002/96/EC mabapi le litšila le lisebelisoa tsa elektroniki,
etela ni.com/environment/weee .

CVI, LabVIEW, Liletsa tsa Sechaba, NI, Noa , Letšoao la Kgwebo la National Instruments, le logo ya Ntsu ke matshwao a kgwebo a National Instruments Corporation. Sheba Lintlha tsa Letšoao la Khoebo ho ni.com/trademarks bakeng sa matshwao a mang a kgwebo a Disebediswa tsa Naha. Letšoao LabWindows le sebelisoa tlas'a laesense e tsoang ho Microsoft Corporation. Windows ke letšoao la khoebo le ngolisitsoeng la Microsoft Corporation United States le linaheng tse ling. Mabitso a mang a lihlahisoa le a khamphani a boletsoeng mona ke matšoao a khoebo kapa mabitso a khoebo a lik'hamphani tse fapaneng. Bakeng sa litokelo tsa molao tse koahelang lihlahisoa/theknoloji ea National Instruments, sheba sebaka se loketseng: Thuso»Patents ho software ea hau, patents.txt file mecheng ea litaba tsa hau, kapa Tsebiso ea Litokelo tsa Naha tsa Lisebelisoa ho ni.com/patents . Sheba Tlhahisoleseding ea Tumellano ea Thomelontle ho ni.com/legal/export-compliance bakeng sa leano la lefats'e la melao ea tsamaiso ea Lisebelisoa tsa Naha le mokhoa oa ho fumana likhoutu tse amehang tsa HTS, ECCNs, le lintlha tse ling tsa ho reka kantle ho naha.
© 2003–2011 National Instruments Corporation. Litokelo tsohle li sirelelitsoe.

Litokomane / Lisebelisoa

LITLOA TSA SECHABA SCXI-1530 Mojule oa Kenyo ea Molumo le Vibration [pdf] Bukana ea Mosebelisi
SCXI-1530 Mojule oa Kenyo ea Molumo le Vibration, SCXI-1530, Mojule oa Kenyo ea Molumo le Vibration, Mojule oa Input ea Vibration, Mojule oa Kenyo, Mojule.

Litšupiso

Related Posts

Tlohela maikutlo

Aterese ea hau ea lengolo-tsoibila e ke ke ea phatlalatsoa. Libaka tse hlokahalang li tšoailoe *