TINY Series Mini Keyboard Controller
Bukana ea Mosebelisiletoto
Bukana ea Mosebelisi

Selelekela

Kea leboha ka ho reka MIDIPLUS TINY series MIDI keyboard, Li fumaneha ka mefuta e 'meli: Likhatiso tsa Basic le Controller.Linotlolo tse 32 MIDI Keyboard li na le taolo ea lebelo, thabo le taolo ea lipalangoang,' me li ka etsoa ka mokhoa o ikhethileng ka Setsi sa Taolo sa MIDIPLUS, se ka etsoang. e jarollotsoe ho tsoa ho MIDIPLUS websebaka. Ka kopo bala bukana ena pele u qala ho e sebelisa, ho u thusa ho utloisisa kapele lits'ebetso le likarolo tsa TINY series MIDI keyboard.
Pakete e Kenyellelitsoe:

• TINY letoto la keyboard MIDI
• Mohala oa USB
• Cubase LE Ngoliso pampiri
• MIDIPLUS Baruti

Lintlha tsa Bohlokoa:

1. Ka kopo sebelisa rag e omeletseng le e bonolo ho hlakola keyboard ea TINY MIDI ha u hloekisa. Se ke oa sebelisa li-thinners tsa pente, li-solvents, li-detergents kapa lisebelisoa tse ling tse kolobisitsoeng ke lik'hemik'hale tse mabifi e le hore li se ke tsa senya phanele kapa keyboard.
2. Ka kopo, ntša thapo ea usb 'me u time keyboard ea TINY series MIDI ha keyboard e sa sebelisoe nako e telele kapa nakong ea lialuma.
3. Qoba ho sebelisa keyboard ea TINY series MIDI haufi le metsi kapa libaka tse metsi, joalo ka bate, letamo, kapa libaka tse ling tse tšoanang.
4. Ka kopo o seke oa beha keyboard ea TINY MIDI sebakeng se sa tsitsang ho qoba ho oa ka tšohanyetso.
5. Ka kopo, se ke oa beha lintho tse boima ho keyboard ea TINY series MIDI.
6. Ka kopo qoba ho beha keyboard ea TINY series MIDI e nang le moea o fokolang.
7. Ka kopo u se ke ua bula ka hare ho TINY series MIDI keyboard, qoba ho oela ha tšepe leha e le efe e ka bakang mollo kapa motlakase 8. Qoba ho qhalla mokelikeli leha e le ofe ho keyboard ea TINY series MIDI.
8. Qoba ho sebelisa keyboard ea TINY Series MIDI haeba ho na le sealuma kapa lehalima
9.  Ka kopo, se ke oa pepesa keyboard ea TINY Series MIDI letsatsing le chesang
10. Ka kopo, se sebelise keyboard ea TINY series MIDI ha khase e lutla haufinyane.

Fetileview

1.1 Karolo e Holimo   Khatiso ea Motheo:

1. Pitch le Modulation joystick: Laola ho kobeha ha molumo le maemo a feto-fetohang a molumo oa hau.
2. SHIFT: Kenya tšebetsong semitone control kapa Controller.
3. Lipalangoang: E ​​fana ka mekhoa ea MMC, e laola lipalangoang tsa DAW ea hau.
4. Transpose le Octave: Kenya tšebetsong taolo ea semitone ea keyboard le taolo ea octave.
5. CHORD: Kenya ts'ebetsong mokhoa oa Chord oa keyboard.
6. SUSTAIN: Kenya ts'ebetsong SUSTAIN ea keyboard.
7. Keyboard: Qala dinoutu ho/ tima.
   Khatiso ea Molaoli:
8. Li-knobs: Laola DAW le lisebelisoa tsa lisebelisoa tsa software.
9. Li-pads: Ho qala mocha oa 10 oa sesebelisoa.

1.2 Karolo e ka morao

1. SUSTAIN: Hokela ho pedali ea SUSTAIN.
2. USB: Hokela komporong ea hau, boema-kepe bona bo fana ka matla le data ea MIDI.
3. MIDI Out: E romella data ea MIDI sesebelisoa sa kantle sa MIDI.

Tataiso

2.1 E loketse ho sebelisoaSebelisa komporong: Hokela keyboard ea TINY series MIDI komporong ea hau u sebelisa thapo ea USB e kenyellelitsoeng. TINY series MIDI keyboard ke sesebelisoa sa USB se lumellanang le sehlopha, kahoo bakhanni ba sona ba kenngoa ka bohona ha ba hokela khomphuteng. Sebelisa le MIDIPLUS miniEngine series series enjene ea molumo: Hokela TINY series MIDI keyboard ho USB Host of miniEngine sebelisa thapo e kenyellelitsoeng ea USB, tšoara konopo ea Matla ho bulela matla. hokela sebuela-pele sa hau kapa headphone ho miniEngine ebe o bulela miniEngine. Sebelisa ka sesebelisoa sa kantle sa MIDI: Hokela ho adaptara ea motlakase ea USB 5V u sebelisa thapo ea USB e kenyellelitsoeng, hokela keyboard ea MIDI OUT ea TINY series MIDI ho MIDI IN ea sesebelisoa sa kantle sa MIDI se nang le thapo e 5 ea MIDI.
2.2 Pitch le Modulation joystickJoystick ea TINY letoto la MIDI Keyboard e lumella Pitch bend ea nako ea nnete le taolo ea Modulation.
Ho thellela ka ho le letšehali kapa ka ho le letona ho "joystick" ho tla phahamisa kapa ho theola molumo oa molumo o khethiloeng. Mefuta e mengata ea phello ena e behiloe ka har'a hardware kapa sesebelisoa sa software se laoloang.
Ho thellela holimo kapa tlase holim'a "joystick" ho eketsa palo ea modulation ho molumo o khethiloeng. Karabelo e itšetlehile ka litlhophiso tsa sesebelisoa se laoloang. Lisebelisoa tse ling kapa li-presets li ke ke tsa sebelisa parameter ea modulation.
Setsing sa Taolo sa MIDIPLUS, sekontiri se ka hlalosoang ke uena e le nomoro ea CC (range CC0-CC128) le MIDI channel (range 0-16). The Modulation Control e ka hlalosoa ke uena e le nomoro ea CC (range CC0-CC127) le kanale ea MIDI (range 0-16).
2.3 SHIFTTšoara konopo ea SHIFT ho fihlella tšebetso ea transpose le ho chencha Pad Banks.
2.4 Octave le Transpose
Octave: Ho tobetsa konopo ea <kapa> ho SHIFT mofuta oa octave oa keyboard, ha e kentsoe, konopo e khethiloeng ea octave e tla panya, Leqhubu la ho panya le fetoha le Octave.
Transpose: Tobetsa 'me u tšoare konopo ea SHIFT, ebe u tobetsa konopo ea <kapa> ho fetisa, ha e kentsoe, konopo ea SHIFT e tla khantša.
2.5 Mokhoa oa ho chordHo kenya Chord mode, tobetsa feela konopo ea CHORD, 'me u bapale Chord eo u e ratang (boholo ba lintlha tse 10) keyboard ka mor'a hore e benye. Hang ha o lokolla konopo ea CHORD, Chord ena e ka bapaloa ka ho tobetsa noto e le 'ngoe feela. Noto e tlase ka ho fetesisa ea Chord e khethiloeng e nkuoa e le lintlha tse tlase, 'me e fetisetsoa ka bo eona ho noto efe kapa efe e ncha eo u e bapalang. Tobetsa konopo ea CHORD hape ho koala mokhoa oa Chord.
2.6 TSAMAISAKenya ts'ebetsong konopo ea SUSTAIN e tla eketsa litlamorao tsa SUSTAIN keyboard, e na le mokhoa o 2 oa ho sebetsa:

1. Tobetsa SUSTAIN hang ho kenya SUSTAIN, tobetsa hape ho tima.
2. Tšoara SUSTAIN ho kenya tšebetsong SUSTAIN, e lokolle hore e emise.

2.7 LipalangoangLikonopo tse tharo tsa lipalangoang tsa letoto la TINY MIDI keyboard li maemong a MMC, a emelang Play, Emisa, le Rekota.
Setsing sa Taolo sa MIDIPLUS, konopo ea Lipalangoang e na le mokhoa oa MMC le mokhoa oa CC.
Ka mokhoa oa MMC, o ka etsa mokhoa oa hau oa konopo ea Lipalangoang: Emisa, Bapala, Pele kapele, Khutlisetsa morao 'me U rekota;
Ka mokhoa oa CC, o ka etsa nomoro ea CC (range CC0-CC127), kanale ea MIDI (range 0-16) le mokhoa (Heke/Toggle).
2.8 Knobs (TINY+)Khiboto ea TINY seires MIDI e na le likonopo tse 4, MIDI CC# ea likonopo tse latelang:

Liroboto	MIDI CC# (E sa feleng)
K1	CC # 93
K2	CC # 91
K3	CC # 71
K4	CC # 74

Setsing sa Taolo sa MIDIPLUS, o ka iketsetsa nomoro ea CC (range CC0-CC127) le kanale ea MIDI (range 0-16) ea K1-K4 ka ho latellana.
2.9 Pads (TINY+) TINY+ e na le li-pad tse 4 tse hlokolosi ka lebelo li emela Libanka tse fapaneng tsa Pad, Libanka tse 4 tsa Pad li ka fetoloa ka ho tobetsa SHIFT le Liphaphatha, 'me li ka romela molaetsa o fapaneng.

BANKA A	BANKA B	BANK C	BANK D
Letlapa 1=36	Letlapa 1=40	Letlapa 1=44	Letlapa 1=48
Letlapa 2=37	Letlapa 2=41	Letlapa 2=45	Letlapa 2=49
Letlapa 3=38	Letlapa 3=42	Letlapa 3=46	Letlapa 3=50
Letlapa 4=39	Letlapa 4=43	Letlapa 4=47	Letlapa 4=51

Setsing sa Taolo sa MIDIPLUS, PAD e na le mokhoa oa NOTE le mokhoa oa CC.
Ka mokhoa oa TLHOKOMELISO, o ka etsa Tlhokomeliso (range 0-127) le kanale ea MIDI (ea 0-16) bakeng sa Pad.
Ka mokhoa oa CC, o ka etsa nomoro ea CC (range 0-127), kanale ea MIDI (range 0-16), le mokhoa oa ho otla (Heke/Toggle).

Litlhophiso tsa DAW

3.1 Steinberg Cubase/Nuendo Pro(MMC)

1. Eya ho menu: Lipalangoang > Setupo sa Kamahanyo ea Morero...
2. Khetha Taolo ea Mochini 'me u lumelle MMC Slave Active, seta Input ea MIDI le Output ea MIDI joalo ka keyboard ea TINY series MIDI, ebe u seta MMC Device ID e le 116.
3. Tobetsa ho OK ho qeta ho seta
   Hlokomela: Cubase LE/AI/Elements ha e tshehetse MMC.

3.2 FL Studio(MMC)

1. Eya ho menu: Likhetho> Litlhophiso tsa MIDI (sekhaoletso sa keyboard: F10)
   
2. Ka har'a Input tab, fumana 'me u Noble TINY series MIDI keyboard, ebe u koala fensetere ho qetela ho seta.
   

3.3 Studio One (MMC)

1. Eya ho menu: Studio One> Options…(mokhutšoane oa keyboard: Ctrl+, )
   
2. Khetha Lisebelisoa tsa Kantle
   
3. Ebe o tobetsa Add...
   
4. Kgetha Keyboard e Ntjha
   
5. Beha ka bobeli Amohela 'me u E romele joalo ka keyboard ea TINY series MIDI
   
6. Tobetsa ho OK ho qeta karolo ena* Mohato oa 7 le oa 8 o sebetsa ho Studio One 3 le mofuta oa pejana
7. Tobetsa ho Add...
   
8. Fumana foldara ea PreSonus lethathamong ebe u khetha MMC, beha ka bobeli Amohela ho 'me u Romelle ho TINY letoto la keyboard ea MIDI, ebe u tobetsa ho OK ho qeta ho seta.
   * Mohato oa 9 le oa 10 o sebetsa ho Studio One 4 le mofuta oa morao-rao
9. Eya ho menu: Studio One> Options…(mokhutšoane oa keyboard: Ctrl+, )
   
10. Khetha E tsoetseng pele 'me u khethe Synchronization, nolofalletsa Sync ho Lisebelisoa tsa Kantle, seta MIDI Machine Control ke TINY series MIDI keyboard, ebe o tobetsa ho OK ho qeta ho seta.

3.4 Pro Tools (MMC)

1. Eya ho menu: Setupo> Lipheripherals…
2. Fesetereng ea pop-up, tobetsa konopo ea Taolo ea Mochini, fumana MIDI Machine Control Remote (Lekhoba) ebe u e tobetsa, beha ID joalo ka 116, ebe u koala fensetere ho qeta ho seta.

3.5 Logic Pro X (MMC)

1. Eya ho menu: Likhetho> MIDI…
2. Khetha fensetere ea Sync, fumana MIDI sync Project Settings… ebe o tobetsa ho eona
3. Numella Kenyeletso ea Mamela ho MIDI Machine Control (MMC) , ebe u koala fensetere ho qetela ho seta.

 3.6 Mokotuli (MMC)

1. Eya ho menu: Dikgetho > Dikgethollo ... (ho kgaoletso ya keyboard: Ctrl + P)
2. Fesetereng ea Likhetho, tlanya tabeng ea Lisebelisoa tsa MIDI, fumana, 'me u tobetse ka ho le letona letotong la TINY MIDI keyboard ho tsoa lethathamong la Lisebelisoa, khetha Numella ho kenya le ho nolofalletsa ho kenya melaetsa ea taolo, ebe u koala fensetere ho qeta ho seta.

Sehlomathiso

4.1 Litlhaloso

Mohlala	LIEKETSENG MONYANE
Keyboard	Keyboard ea lintlha tse 32 e nang le kutloelo-bohloko ea lebelo
Boholo ba Polyphony	64
Likonopo	1 SHIFT, 3 Transport, 2 Octave, 1 SUSTAIN, 1 CHORD
Likhopo (TINY+)	4 Likotola
Lipampiri (TINY+)	Li-pads tse 4 tsa lebelo tse nang le backlight
Lihokelo	1 USB Type C, 1 MIDI kantle, 1 SUSTAIN
Litekanyo	NYENYANE: 390 x 133 x 40(mm) TINY+:390 x 133 x 46 (mm)
Boima bo kahare	NYENYANE: 0.56kg TINY+:0.65kg

4.2 Lethathamo la MIDI CC

Nomoro ea CC	Morero	Nomoro ea CC	Morero
0	Khetha Banka MSB	66	Sostenuto On / Off
1	Ho feto-fetoha ha molumo oa lentsoe	67	Bonolo ba bebofatsa On / Off
2	Moea Controller	68	Legato Footswitch
3	E sa hlalosoang	69	Tšoara 2
4	Leoto molaoli eo	70	Phapang ea molumo
5	Nako ea Portamento	71	Timbre / Harmonic Quality
6	Ho Kena Data MSB	72	Nako ea ho Lokolla
7	Molumo o ka Sehloohong	73	Nako ea Tlhaselo
8	Ho leka-lekanya	74	Khanya
9	E sa hlalosoang	75 ~ 79	Selaoli sa molumo 6 ~ 10
10	Pan	80 ~ 83	Molaoli oa Morero oa Kakaretso 5 ~ 8
11	Pontšo Molaoli	84	Taolo ea Portamento
12 ~ 13	Taolo ea Phello 1 ~ 2	85 ~ 90	E sa hlalosoang
14 ~ 15	E sa hlalosoang	91	Reverb Send Level
16 ~ 19	Molaoli oa Morero oa Kakaretso 1 ~ 4	92	Liphello 2 Botebo
20 ~ 31	E sa hlalosoang	93	Nete ​​ea Romelo ea Chorus
32	Banka Khetha LSB	94	Liphello 4 Botebo
33	Ho feto-fetoha ha lentsoe LSB	95	Liphello 5 Botebo
34	Motsamaisi oa phefumoloho LSB	96	Keketso ea Boitsebiso
35	E sa hlalosoang	97	Boitsebiso bo fokolang
36	Leoto molaoli eo LSB	98	LSB ea NRPN
37	Portamento LSB	99	NRPN MSB
38	Ho Kena Data LSB	100	RPN LSB
39	Buka e kholo ea LSB	101	RPN MSB
40	Tekanyo LSB	102 ~ 119	E sa hlalosoang
41	E sa hlalosoang	120	All utloahala Off
42	Tlanya LSB	121	Seta Botjha Balaoli Bohle
43	Motsamaisi oa Tlhaloso LSB	122	Taolo ea Lehae e Buletsoe / Tsoa
44 ~ 45	Selaoli sa Phello LSB 1 ~ 2	123	Lintlha Tsohle li Tlohile
46 ~ 47	E sa hlalosoang	124	Mokhoa oa Omni Off
48 ~ 51	Molaoli oa Morero o Akaretsang LSB 1 ~ 4	125	Mokgwa wa Omni o Buletswe
52 ~ 63	E sa hlalosoang	126	Mokhoa oa Mono On
64	Ntlafatsa	127	Mokhoa oa Poly Poly On
65	Portamento On / Off

4.3 MIDI DIN ho isa ho Adapter ea TRS ea 3.5mm
TINY seires MIDI keyboard e na le 3.5mm mini jack MIDI OUT, haeba u batla ho hokela ho standard 5 pin MIDI IN, u lokela ho sebelisa 3.5mm TRS ho MIDI DIN adaptara, ka kopo hlokomela hore ho na le 3 mefuta e tloaelehileng ea adaptara, etsa bonnete ba hore u sebelisa Mofuta oa A, tlhophiso ea MIDI-pin ka tsela e latelang:MIDI 4 (Mohloli) > TRS Reng
MIDI 2 (Thebe) > TRS Sleeve
MIDI 5 (Sink) > TRS Keletso

www.midiplus.com

Litokomane / Lisebelisoa

MiDiPLUS TINY Series Mini Keyboard Controller [pdf] Bukana ea Mosebelisi TINY Series Mini Keyboard Controller, TINY Series, Mini Keyboard Controller, Keyboard Controller, Controller

Litšupiso

• Bukana ea Mosebelisi