KRAMER TBUS-4xl Tafole Connection Bese
Tlhahisoleseding ya Sehlahiswa
- Litlhaloso
- Mohlala: TBUS-4xl Tafole Connection bese
- Nomoro ea Karolo: 2900-300067 Tšen 3
- Selelekela
- Rea u amohela ho Kramer Electronics! Ho tloha ka 1981, Kramer Electronics esale e fana ka lefats'e la litharollo tse ikhethang, tsa boiqapelo, le tse theko e tlase bakeng sa mathata a mangata a tobanang le livideo, molumo, tlhahiso, le litsebi tsa khaso letsatsi le letsatsi.
- Lilemong tsa morao tjena, re ntlafalitse le ho ntlafatsa boholo ba mohala oa rona, ho etsa hore e betere le ho feta!
- Mefuta ea rona e fapaneng ea 1,000-plus e se e hlaha ka lihlopha tse 11 tse hlalosoang ka ho hlaka ke ts'ebetso:
- SEHLOPHA
- Kabo Amplifiers, GROUP
- Li-Switchers le Matrix Switchers, GROUP
- Laola Systems, GROUP
- Bafetoleli ba Format/Maemo, GROUP
- Range Extenders le Repeaters, GROUP
- Lihlahisoa tse khethehileng tsa AV, GROUP
- Li-Converter le Scalers, GROUP
- Lithapo le Lihokelo, GROUP
- Khokahano ea Kamore, GROUP
- Lisebelisoa le li-adapter tsa Rack, le GROUP
- Lihlahisoa tsa Sierra.
- Kea leboha ka ho reka sebaka sa Kramer TBUS-4xl, se loketseng likamore tsa bolulo, liboka le likamore tsa koetliso!
- Hlokomela hore foreimi e ka hare, kopano ea sokete ea motlakase, thapo ea motlakase le tse ling tse kenyang sebaka sa TBUS-4xl li rekoa ka thoko.
- Rea qala
- Re u khothalletsa hore u:
- Hlakola thepa ka hloko 'me u boloke lebokose la pele le thepa ea ho paka bakeng sa thomello e ka bang teng nakong e tlang
- Review dikahare tsa bukana ena ya mosebedisi
- Sebelisa lithapo tsa Kramer tse sebetsang hantle haholo
- Eya ho www.kramerav.com ho hlahloba libuka tsa morao-rao tsa basebelisi, lenane le feletseng la lipoleiti tsa lebota la Kramer le li-connectors tsa module, le mananeo a kopo, le ho hlahloba hore na lintlafatso tsa firmware li teng (moo ho loketseng).
- Ho Fumana Mosebetsi o Molemo ka ho Fetisisa
- Ho finyella tshebetso e ntle ka ho fetisisa:
- Sebelisa feela lithapo tsa khokahanyo tsa boleng bo botle ho qoba tšitiso, ho senyeha ha boleng ba mats'oao ka lebaka la ho se tsamaisane hantle, le lerata le phahameng (hangata le amahanngoa le likhoele tsa boleng bo tlase)
- Qoba ho kena-kenana le lisebelisoa tsa motlakase tsa boahelani tse ka amang boleng ba lets'oao hampe
- Beha Kramer TBUS-4xl ea hau hole le mongobo, khanya ea letsatsi le lerōle le feteletseng
- Ho finyella tshebetso e ntle ka ho fetisisa:
- Bukana ea mantsoe
- Foreimi e ka hare: Foreimi e ka hare e kena ka har'a sebaka sa TBUS
- Universal socket: Socket ea Universal e lekana hoo e ka bang lithapo tsohle tsa motlakase lefatšeng ka bophara
Litaelo tsa Tšebeliso ea Sehlahisoa
- Fetileview
- TBUS-4xl Table Connection Bus ke sebaka se kampetsoeng se etselitsoeng liphaposi tsa bolulo, likamore tsa liboka le likamore tsa koetliso. E lumella ho hokahanya ha lisebelisoa tse fapaneng le likhoele.
- Sebaka sa hau sa TBUS-4xl
- Sebaka sa TBUS-4xl se kenyelletsa likarolo tse latelang:
- Sebaka se kaholimo
- Liforeimi tse ka hare tsa boikhethelo (tse rekiloeng ka thoko)
- Lisebelisoa tseo u ka li khethang (li rekiloe ka thoko)
- Likhetho tsa socket ea motlakase (tse rekiloeng ka thoko)
- Likhetho tsa lithapo tsa motlakase (tse rekiloeng ka thoko)
- TBUS-4xl Liforeimi tsa Boikhethelo tsa ka hare
- Sebaka sa TBUS-4xl se tšehetsa liforeimi tse ka hare tsa boikhethelo tse lumellang ho etsoa le ho hlophisa lithapo le lisebelisoa.
- Lisebelisoa tsa TBUS-4xl ka Boikhethelo
- Sebaka sa TBUS-4xl se ts'ehetsa likhetho tsa boikhethelo tse fanang ka likhetho tse ling tsa khokahanyo, joalo ka HDMI, USB, le likou tsa molumo.
- Likhetho tsa Socket ea Matla
- Sebaka sa TBUS-4xl se ts'ehetsa likhetho tse fapaneng tsa sokete ea matla ho amohela lithapo tsa motlakase tse fapaneng le mefuta ea plug.
- Khetho ea Power Cord
- Sebaka sa TBUS-4xl se tšehetsa mekhoa e fapaneng ea lithapo tsa motlakase ho lumellana le libaka tse fapaneng tsa libaka le litlhoko tsa matla.
- Ho kenya TBUS-4xl Ho Kopanya Frame e ka Hare
- Ho kopanya foreimi e ka hare:
- Latela litaelo tse fanoeng ka foreimi e ka hare ea boikhethelo ho e kopanya.
- Ho kopanya foreimi e ka hare:
- Ho kenya Frame e ka Hare
- Ho kenya foreimi e ka hare kahara TBUS-4xl:
- Netefatsa hore sebaka sa TBUS-4xl ha se na letho ebile se hloekile.
- Lokisetsa foreime e ka hare le masoba a kentsoeng ka har'a sebaka se koetsoeng.
- Sireletsa foreime e ka hare sebakeng se kampetsoeng u sebelisa li-screw tse fanoeng.
- Ho kenya foreimi e ka hare kahara TBUS-4xl:
- Ho Seha Lekhalo Tafoleng
- Ho kenya TBUS-4xl ka har'a tafole, o hloka ho khaola lekhalo holim'a tafole. Latela mehato ena:
- Lekanya le ho tšoaea sebaka se lakatsehang bakeng sa ho bula holim'a tafole.
- Sebelisa sesebelisoa se loketseng sa ho itšeha ho khaola ka hloko sebaka se tšoailoeng. Netefatsa hore litekanyo tsa cutout li lumellana le litlhaloso tse fanoeng bukeng ea mosebelisi.
- Tlosa lithōle leha e le life kapa likarolo tse bohale sebakeng sa ho khaola.
- Ho kenya TBUS-4xl ka har'a tafole, o hloka ho khaola lekhalo holim'a tafole. Latela mehato ena:
- Ho kenya TBUS-4xl ka ho Buloa ha Cut Out
- Ho kenya TBUS-4xl ka har'a bula butle:
- Netefatsa hore TBUS-4xl e khaotsoe mehloling ea matla le likhoele.
- Tšoara TBUS-4xl ka matsoho a mabeli 'me u e tsamaise le monyetla oa ho bula.
- Ka bonolo kenya TBUS-4xl sebakeng se bulehileng, ho etsa bonnete ba hore e phalla ka holim'a tafole.
- Ho kenya TBUS-4xl ka har'a bula butle:
- Ho hokela Lithapo
- Ho hokela likhoele ho TBUS-4xl:
- Hlalosa likhokahano tse nepahetseng tsa lithapo ho TBUS-4xl.
- Hokela likhoele likoung tsa bona tse fapaneng ho TBUS-4xl.
- Netefatsa hore lithapo li hoketsoe ka mokhoa o sireletsehileng.
- Ho hokela likhoele ho TBUS-4xl:
- Ho kenya Lithapo tsa Phallo
- Haeba ho hlokahala lithapo tsa ho feta:
- Hlalosa menyetla ea ho feta ho TBUS-4xl.
- Kenya likhoele tsa ho feta ka har'a menyetla ea tsona.
- Netefatsa hore likhoele tsa ho feta li kentsoe ka mokhoa o sireletsehileng.
- Haeba ho hlokahala lithapo tsa ho feta:
- Ho Fetola Bophahamo ba Frame e ka Hare
- Haeba ho hlokahala, lokisa bolelele ba foreimi e ka hare ka har'a TBUS-4xl e kentsoeng:
- Lokolla likurufu tsa tokiso ea bophahamo tse teng mahlakoreng a foreimi e ka hare.
- Thelelisa foreimi e ka hare holimo kapa tlase ho ea bophahamong bo lakatsehang.
- Tiisa li-screw tsa bophahamo ho tiisa foreimi e ka hare hore e be teng.
- Haeba ho hlokahala, lokisa bolelele ba foreimi e ka hare ka har'a TBUS-4xl e kentsoeng:
- Ho sebelisa TBUS-4xl
- Hang ha TBUS-4xl e kentsoe 'me lithapo li hoketsoe, u ka li sebelisa ho fihlella le ho tsamaisa lisebelisoa le likhokahano tse fapaneng ka phaposing ea hau ea boto, phaposi ea liboka, kapa phaposing ea boikoetliso.
- Litlhaloso tsa Tekheniki tsa Assembled TBUS-4xl
- Bakeng sa lintlha tsa tekheniki tsa TBUS-4xl e kopaneng, ka kopo sheba buka ea mosebelisi kapa ikopanye le Kramer Electronics bakeng sa tlhaiso-leseling e batsi.
- LBH
- Q: A na nka reka foreimi e ka hare, kopano ea sokete ea motlakase, thapo ea motlakase, le lintho tse kentsoeng ka thoko?
- A: E, foreimi e ka hare, kopano ea sokete ea motlakase, thapo ea motlakase, le lisebelisoa bakeng sa sebaka sa TBUS-4xl li rekoa ka thoko ho lumella ho itloaetsa le ho fetoha habonolo.
- Q: A na nka sebelisa likhoele tsa boleng bo tlase ka TBUS-4xl?
- A: Ho khothaletsoa ho sebelisa likhoele tsa boleng bo holimo ho qoba tšitiso, ho senyeha ha boleng le maemo a phahameng a lerata. Lithapo tsa boleng bo tlase li ka ama ts'ebetso hampe.
- Q: Ke lokela ho beha TBUS-4xl joang?
- A: Beha Kramer TBUS-4xl ea hau hole le mongobo, khanya ea letsatsi e feteletseng le lerōle ho netefatsa ts'ebetso e nepahetseng le bophelo bo bolelele.
Tataiso ea ho Qala ka Potlako
TBUS-4xl Quick Start Guide
- Leqephe lena le u tataisa mabapi le ts'ebetso ea mantlha le tšebeliso ea lekhetlo la pele ea TBUS-4xl ea hau.
- Bakeng sa tlhaiso-leseling e batsi, bona bukana ea mosebelisi ea TBUS-4xl le maqephe a litaelo a modular.
- U ka khoasolla bukana ea morao-rao ho http://www.kramerelectronics.com.
Selelekela
- Rea u amohela ho Kramer Electronics! Ho tloha ka 1981, Kramer Electronics esale e fana ka lefats'e la litharollo tse ikhethang, tsa boiqapelo, le tse theko e tlase bakeng sa mathata a mangata a tobanang le livideo, molumo, tlhahiso, le litsebi tsa khaso letsatsi le letsatsi. Lilemong tsa morao tjena, re ntlafalitse le ho ntlafatsa boholo ba mohala oa rona, ho etsa hore e betere le ho feta!
- Mefuta ea rona e fapaneng ea 1,000-plus e se e hlaha ka lihlopha tse 11 tse hlalosoang ka ho hlaka ke ts'ebetso: GROUP 1: Distribution Amplifiers, GROUP 2: Switchers and Matrix Switchers, GROUP 3: Control Systems, GROUP 4: Format/Standards
- Bafetoleli, GROUP 5: Range Extenders and Repeaters, GROUP 6: Specialty AV Products, GROUP 7: Scan Converters and Scalers, GROUP 8: Cables and Connectors, GROUP 9: Khokahano ea Kamore, GROUP 10: Lisebelisoa le Rack.
- Li-adapter, le GROUP 11: Sierra Products.
- Kea leboha ka ho reka sebaka sa Kramer TBUS-4xl, se loketseng likamore tsa bolulo, liboka le likamore tsa koetliso!
- Hlokomela hore foreimi e ka hare, kopano ea sokete ea motlakase, thapo ea motlakase le tse ling tse kenyang sebaka sa TBUS-4xl li rekoa ka thoko.
Rea qala
Re u khothalletsa hore u:
- Hlakola thepa ka hloko 'me u boloke lebokose la pele le thepa ea ho paka bakeng sa thomello e ka bang teng nakong e tlang
- Review dikahare tsa bukana ena ya mosebedisi
- Sebelisa lithapo tsa Kramer tse sebetsang hantle haholo
Eya ho www.kramerav.com. ho hlahloba libuka tsa morao-rao tsa basebelisi, lenane le feletseng la lipoleiti tsa lebota la Kramer le li-connectors tsa module, le mananeo a kopo, le ho hlahloba hore na lintlafatso tsa firmware li teng (moo ho loketseng).
Ho Fumana Mosebetsi o Molemo ka ho Fetisisa
Ho finyella tshebetso e ntle ka ho fetisisa:
- Sebelisa feela lithapo tsa khokahanyo tsa boleng bo botle ho qoba tšitiso, ho senyeha ha boleng ba mats'oao ka lebaka la ho se tsamaisane hantle, le lerata le phahameng (hangata le amahanngoa le likhoele tsa boleng bo tlase)
- Qoba ho kena-kenana le lisebelisoa tsa motlakase tsa boahelani tse ka amang boleng ba mats'oao hampe
- Beha Kramer TBUS-4xl ea hau hole le mongobo, khanya ea letsatsi le lerōle le feteletseng
Bukana ea mantsoe
| Foreimi e ka hare | Foreimi e ka hare e kena ka har'a sebaka sa TBUS |
| Sokete ea bokahohle | Socket ea Universal e lekana hoo e ka bang lithapo tsohle tsa motlakase lefatšeng ka bophara |
| Kenya | E kenngoa ka har'a foreimi e ka hare. E-ea ho rona Web sebaka sa ho hlahloba mefuta e fapaneng ea tse kentsoeng tse nang le boholo bo le bong le tse peli |
Fetileview
- Kramer TBUS-4xl ke aluminium ea boleng bo holimo, e nang le anodized, e kampetsoeng ea libese e behiloeng tafoleng bakeng sa likamore tsa bolulo le likamore tsa kopano.
- Sebaka sa eona se khahlehang se etselitsoe ho fana ka khokahanyo e phahameng ka ho fetisisa sebakeng se senyenyane ka ho fetisisa se ka khonehang.
- Yuniti e tiile, ha e na litšenyehelo, 'me ho bonolo ho e kenya.
TBUS-4xl likarolo:
- Moralo oa modular, o o lumellang hore o hlophise TBUS-4xl ho latela litlhoko tsa hau
- Sekoaelo sa aluminium se nang le anodized kapa se entsoeng ka borashe se nang le monyetla o khethehileng oa ho feta (hlokomela, hore mebala e meng e hlophisitsoeng le eona e ka laeloa)
- Bophahamo ba ho fetola screw masoba ho beha foreime e ka hare (e laetsoeng ka thoko) ho bophahamo bo lakatsehang
- Mehala ea sokete ea motlakase e loketseng li-sockets tse latelang tsa motlakase: USA, Germany (Europlug), Belgium-France, Italy,
- Australia, Israel, Afrika Boroa kapa “Universal” bakeng sa tšebeliso kae kapa kae (sheba lithibelo tsa litšebelisano ho Karolo ea 7)
- Odara li-sockets tsa motlakase ka thoko ho Kramer Electronics
- Sesebelisoa sa boikhethelo sa ho kenya sebaka sa sokete e le 'ngoe ea motlakase
- Thepa ea ho kenya e ka kenyelletsa li-module tse peli tsa lebota la lebota, likhokahano tse peli tsa li-cable pass-through, kapa e 'ngoe ea tsona
- TBUS-4xl e khona ho feto-fetoha ka bolelele 'me sekoahelo se buleha le ho koaloa ka letsoho, ho boloka lithapo le likhokahano li sa bonahale ha li sa sebelisoe.
- Se ke oa beha lintho tse boima holim'a! ka holimo ho TBUS-4xl.
Sebaka sa hau sa TBUS-4xl
| # | Sebopeho | Mosebetsi | |
| 1 | Sekoaelo se Sets'oana sa Anodized / Brushed Clear Textured Sekwahelo | E kenyelelitse ho bula ha cable pass-through; e kwahela Foreimi e ka Hare, mme e siya bokahodimo ba tafole bo makgethe | |
| 2 | Rim e ka ntle | E kena ka holim'a tafole.
Molebeli oa rabara o sireletsang o sireletsa moqomo o ka ntle nakong ea sekepe. E tlose pele o kenya yuniti |
|
| 3 | Sebaka se koaletsoeng | E kentsoe ka har'a tafole sehiloeng | |
| 4 | Tafole Clamping Seta | Basireletsi ba Rabara | Sireletsa bokaholimo ba tafole ha u kenya yuniti (e le 'ngoe bakeng sa cl ka 'ngoeamp) |
| 5 | Ho notlela Li-Screws tsa Butterfly | Tiisa ho notlela serurubele se ntseng se phahama (se le seng bakeng sa cl ka 'ngoeamp) | |
| 6 | Mounting Butterfly Screws | Tiisa ho tiisa yuniti sebakeng sa tafole (e le 'ngoe bakeng sa cl ka 'ngoeamp) | |
| 7 | Li-brackets tse ntseng li eketseha | Kenya likheo tsa bracket ka mor'a hore u kenye sebaka se ka hare ho tafole - ho boloka yuniti holim'a tafole (e le 'ngoe bakeng sa sehlopha ka seng.amp) | |
| 8 | Height Adjustment Screw masoba | Li-screw masoba lehlakoreng le leng le le leng la phanele li sebelisetsoa ho lokisa bolelele ba Frame e ka Hare | |
| 9 | Li-bracket Slits | Bakeng sa ho hokela masakaneng a mabeli a homang ka mahlakoreng a fapaneng | |
| 10 | Tlama Likoti | Kenya thae ea ho itšeha ka masoba ho lokisa likhoele tsa ho feta maboteng a kahare a yuniti. | |
TBUS-4xl Liforeimi tsa Boikhethelo tsa ka hare
Liforeimi tse latelang tse ka hare li ka kenngoa ka har'a TBUS-4xl e kentsoeng:
Liforeimi tse ka hare tse entsoeng ka mokhoa o ikhethileng li ka etsoa haeba ho hlokahala. Ikopanye le Kramer Electronics bakeng sa lintlha tse ling.
Lisebelisoa tsa TBUS-4xl ka Boikhethelo
Likhetho tsa Socket ea Matla
- Liforeimi tse ka hare li tšehetsa ho kenya kopano e le 'ngoe kapa ho feta tse latelang tsa sokete ea motlakase.
- Hlokomela: Li-sockets tsa matla tsa Brazil li fanoa e le li-sockets tse peli tsa motlakase kopanong e le 'ngoe ea sokete ea matla (sheba tafole e ka tlase).
Likopano tsa Socket ea Matla a le Mong
Likopano tsa Socket ea Matla a mabeli
Khetho ea Power Cord
O ka odara leha e le efe ea lithapo tse latelang tsa motlakase hore o li sebelise ka TBUS e tloaelehileng:
| Mofuta oa Thapo ea Matla | Tlhaloso | P/N |
| 6ft/110V (Amerika Leboya) | C-AC/US (110V) | 91-000099 |
| 6ft/125V (Japan) | C-AC/JP (125V) | 91-000699 |
| 6ft/220V (Yuropa) | C-AC/EU (220V) | 91-000199 |
| 6ft/220V (Iseraele) | C-AC/IL (220V) | 91-000999 |
| 6ft/250V (UK) | C-AC/UK (250V) | 91-000299 |
| 6ft/250V (India) | C-AC/IN (250V) | 91-001099 |
| 6ft/250V/10A (Chaena) | C-AC/CN (250V) | 91-001199 |
| 6ft/250V/10A (Afrika Boroa) | C-AC/ZA (250V) | 91-001299 |
Ho kenya TBUS-4xl
Ho kenya TBUS-4xl etsa mehato e latelang:
- Kopanya Foreimi e ka Hare.
- Kenya Frame e ka Hare.
- Seha lesoba tafoleng.
- Kenya yuniti ka ho bula le ho sireletsa tafoleng.
- Hokela likhoele.
- Kenya likhoele tsa ho feta.
- Fetola bolelele ba foreimi e ka hare.
Ho Kopanya Frame e ka Hare
- Li-module tse kentsoeng foreiming e ka hare li ka kenyelletsa li-inserts tse le 'ngoe le / kapa tse peli tse kentsoeng hammoho le sokete ea matla (ka mefuta e meng).
- Karolo ena e hlalosa mokhoa oa ho kopanya li-module tsena.
- Setsi ka seng sa module se tla le litaelo tse qaqileng tsa kopano.
Ho hlophisoa ha lintho
U ka hlophisa bocha kapa ua tlosa lipoleiti life kapa life tse kenngoeng ho Inner Frame ebe u li nkela sebaka ka lipoleiti tsa Kramer passive lebota kapa limojule tsa sehokelo bakeng sa ho hokahana le matšoao a mofuta oa A/V.
Ho kenya sehokelo sa Kramer kapa mojule oa sehokelo:
- Hlakola li-screw tse peli tse tlamellang poleiti e se nang letho foreiming e ka hare ebe o tlosa poleiti e se nang letho.
- Beha karolo e hlokahalang ea Kramer holim'a sebaka se bulehileng, kenya li-screws tse peli ho lokisa ho kenya Kramer sebakeng, 'me u li tiise.
| # | Sebopeho | Mosebetsi |
| 1 | Ho Bula Sokete ea Matla | E loketse sokete e le 'ngoe ea motlakase kapa khiti ea boikhethelo ea ho kenya bakeng sa TBUS |
| 2 | Lipoleiti Blank | Likoahelo tse peli tse se nang letho tse ka nkeloang sebaka ke lipoleiti tsa lebota ha ho hlokahala |
| 3 | Arola li-Grommets | Sututsa ka thoko hanyane ho kenya likhoele |
| 4 | Li-brackets tse arohaneng | Tšehetsa grommet e arohaneng bakeng sa ho feta-lithapo |
| 5 | Adjustable Height Screw Holes | Bakeng sa ho lokisa bolelele ba foreimi e ka hare |
Ho theha Likopano tsa Socket ea Matla
- Ho kenya sekoti sa matla, beha sokete ea matla tlas'a foreimi sebakeng sa eona se loketseng ebe u se tiisa ka li-screws tse peli (tse fanoeng).
- Li-socket kits tsa motlakase li tla le litaelo tsa kopano.
Ho kenya Frame e ka Hare
Ho kenya foreimi e ka hare:
- Beha foreimi e ka hare ka hare ho sebaka sa TBUS-4xl.
- Beha bolelele bo hlokahalang ka menoana ea hau ho tlisa foreime e ka hare sebakeng seo u se batlang, 'me u se phuruele le ho se tiisa sebakeng u sebelisa likurufu tsa tokiso ea bophahamo (tse fanoeng ka foreimi e ka hare).
- Li-kits tsa Inner Frame li tla le litaelo tsa kopano.
Ho Seha Lekhalo Tafoleng
Ho seha lesoba tafoleng:
- Beha template e sehiloeng e kenyellelitsoeng (e kenyellelitsoeng le TBUS-4xl ea hau) holim'a tafole hantle moo u batlang ho kenya TBUS-4xl.
- Hokela thempleite tafoleng ka li-screw tse kenyellelitsoeng (haeba u sebelisa thempleite ea cutout).
- Ho latela karolo e ka hare ea template, khaola lesoba holim'a tafole ka sesepa sa saber kapa keyhole ho latela litekanyo tse bontšitsoeng ho Setšoantšo sa 4 (eseng ho sekala). Botenya ba tafole e lokela ho ba 76.2mm / 3 inches kapa ka tlase.
- Hlakola 'me u tlose thempleite holim'a tafole ebe u hloekisa bokaholimo ba tafole.
- Hlokomela hore u se ke ua senya tafole.
- Haeba ho hlokahala, o ka khoasolla template e felletseng ho rona Web sebaka.
- Kramer Electronics ha e ikarabelle bakeng sa tšenyo leha e le efe e bakiloeng tafoleng.
Ho kenya TBUS-4xl ka ho Buloa ha Cut Out
Ho kenya TBUS-4xl qalong:
- Tlosa molebeli oa rabara o sirelletsang ho pota-pota moeli o ka ntle oa ntlo ea TBUS-4xl. Hlokomela bohale bo bohale!
- Kenya yuniti ka hloko pulong e lokisitsoeng (sheba setšoantšo sa 5).
- Nka li-brackets tse tšehetsang tlas'a tafole 'me u li behe ka har'a li-grooves tse tšehetsang mahlakoreng ka bobeli a yuniti (sheba setšoantšo sa 2, ntlha ea 7).
- Netefatsa tepo e nepahetseng ea yuniti pele o tiisa li-screws.
- Tiisa likurufu tsa serurubele tse ntseng li hloella holimo ho fihlela li fihla holim'a tafole (ho tloha ka tlase). Tiisa ka thata (sheba setšoantšo sa 5).
- Tiisa likurufu tsa serurubele tse notlelang tlase ho fihlela li tiea khahlano le borakete e ntseng e hola.
Ho hokela Lithapo
Ha o nkela lintho tse kentsoeng tse se nang letho sebaka ka sehokelo (bakeng sa mohlalaample, VGA, audio, HDMI joalo-joalo):
- Kenya lithapo lihokelong tsa tsona tse loketseng ho tloha ka tlase.
- Sireletsa likhoele mekoting ea thae u sebelisa maqhama a kenyelelitsoeng a ho itšebetsa. U se ke ua tiisa likhoele ka thata haholo kapa ka mokhoa o hlephileng haholo. Tlohela tekanyo e nyane ea ho khoehlisa. Ka mor'a hore TBUS-4xl e hokahane le matla a motlakase le likhoele tse nepahetseng, e se e loketse ho sebelisoa.
Ho kenya Lithapo tsa Phallo
Ho kenya likhoele tsa ho feta, mohlalaample, ho hokela laptop, etsa se latelang (sheba setšoantšo sa 3):
- Tlosa li-screw tse peli tse hokelang bracket e arohaneng.
- Tlosa grommet e arohaneng.
- Kenya thapo ka ho bula khutlonnetsepa.
- Bula grommet e arohaneng hanyenyane 'me u kenye likhoele tse hlokahalang.
- Beha borakete e arohaneng ho potoloha grommet 'me u behe kopano ena holim'a Frame e ka Hare.
- Beha li-screws tse peli ka mokhoa o nepahetseng 'me u tiise bracket e arohaneng hammoho le grommet le likhoele tse kentsoeng ho foreimi e ka hare.
- Kenya maqhama a ho itšenola ka mekoting ea thae ho tiisa likhoele ka har'a marako a ka hare a sebaka se koalehileng.
Ho Fetola Bophahamo ba Frame e ka Hare
Haeba ho hlokahala, o ka fetola bolelele ba foreimi e ka hare ho amohela likhoele tse kholo kapa tse ngata. Ho lokisa, etsa se latelang:
- Tlosa li-screws tse 'nè tsa ho fetola bophahamo, ha u ntse u tšehetsa bokaholimo ho tloha ka tlase ka menoana ea hau.
- Phahamisa kapa u theole foreimi e ka hare ho bophahamo bo hlokahalang, kenya li-screws, 'me u li tiise sebakeng.
Ho sebelisa TBUS-4xl
- Hang ha TBUS-4xl e kentsoe, u ka e etsa habonolo hore e lumellane le litlhoko tsa hau ka ho hokela lisebelisoa tse hlokahalang tsa A/V, joalo ka ha ho bonts'itsoe ho ex.ample setšoantšong sa 6.
Litlhaloso tsa Tekheniki
Litlhaloso tsa Tekheniki tsa Assembled TBUS-4xl
| MOTSOA MATLA | Likopano tsa Socket ea Matla | |
| (Meeli ea matla a AC): | Bokahohle | 100-240V AC, 50/60Hz, 5A
Boholo ba 5A ka motlakase ka mong |
| E lumellana ka botlalo e nang le li-plug tsa motlakase UK, India, Italy le Denmark, hammoho le 2-prong Europlug.
E lumellana ka mokhoa o itseng (haeba polarity e khutlisetsoa morao) ka li-plug tsa China, Switzerland, Israel le USA. Sokete ea bokahohleng ha e fane ka motheo oa li-plug tsa Europe Bohareng le Fora (ho e-na le hoo, u lokela ho laela li-sockets tse khethehileng). |
||
| usa | 100-240V AC, 50/60Hz, 5A
Boholo ba 5A ka motlakase ka mong |
|
| Jeremane le EU | 100-240V AC, 50/60Hz, 5A
Boholo ba 5A ka motlakase ka mong |
|
| Belgium le Fora | 100-240V AC, 50/60Hz, 5A
Boholo ba 5A ka motlakase ka mong |
|
| Afrika Boroa | 100-240V AC, 50/60Hz, 5A
Boholo ba 5A ka motlakase ka mong |
|
| Australia | 100-240V AC, 50/60Hz, 5A
Boholo ba 5A ka motlakase ka mong |
|
| Iseraele | 220V AC, 50/60Hz, 5A
Boholo ba 5A ka motlakase ka mong |
|
| Afrika Boroa | 220V AC, 50/60Hz, 5A
Boholo ba 5A ka motlakase ka mong |
|
| FUSE RATING: | T6.3A 250V | |
| TŠEBELETSO EA MOCHESO OA HO SEBELISA: | +5 ho ea ho +45 Deg. Centigrade | |
| HO SEBELISA HUMIDITY RANGE: | 10 ho isa ho 90% ea RHL, e sa fokotseng | |
| SEBAKA SA MOTHEMONGA OA BOLOKO: | -20 ho ea ho +70Deg. C. | |
| SEBAKA SA MOHOO OA BOLOKO: | 5 ho isa ho 95% ea RHL, e sa fokotseng | |
| DIMENSION: | Letlapa le ka holimo: 243mm x 140.4mm (9.6″ x 5.5″) W, D
Sebaka: 203mm x 102mm x 130mm (8.0″ x 4.0″ x 5.1″) W, D, H |
|
| Boima: | TBUS-4: 0.88kg (1.948lbs) hoo e ka bang. Tafole clampboima: 0.25kg (0.6lbs) | |
| ACCESSORIES: | Thapo ea matla, lithae tse tšeletseng tsa ho itšebetsa, template, li-screws tsa template | |
| DIKGETHO: | Liforeimi tse ka hare, lipoleiti tsa lebota le li-interfaces, lisebelisoa tsa sokete ea motlakase, thapo ea motlakase | |
| Litlhaloso li ka fetoha ntle le tsebiso ho www.kramerav.com | ||
TIISETSO MOEKETSI
Litlamo tsa tiisetso tsa Kramer Electronics bakeng sa sehlahisoa sena li lekantsoe ho lipehelo tse boletsoeng ka tlase:
Se Koahetsoeng
- Tiisetso ena e lekanyelitsoeng e koahela liphoso tsa thepa le moetso oa sehlahisoa sena.
Se sa Koaheloang
- Tiisetso ena e lekanyelitsoeng ha e koahele tšenyo leha e le efe, ho senyeha kapa ho se sebetse ho bakoang ke phetoho leha e le efe, phetoho, tšebeliso e fosahetseng kapa tlhokomelo e sa lokelang, tšebeliso e mpe, tlhekefetso, kotsi, ho hlokomolohuoa, ho pepesehela mongobo o feteletseng, mollo, ho paka ka tsela e fosahetseng le ho tsamaisa thepa (litlaleho tse joalo li tlameha ho ba teng. e hlahisoang ho mojari), lehalima, ho phahama ha matla, kapa liketso tse ling tsa tlhaho.
- Tiisetso ena e lekanyelitsoeng ha e koahele tšenyo leha e le efe, ho senyeha kapa ho se sebetse ho bakoang ke ho kenngoa kapa ho tlosoa ha sehlahisoa sena ho kenngoeng, leha e le efe e sa lumelloeng.ampEring ka sehlahisoa sena, litokiso leha e le life tse lekiloeng ke mang kapa mang ea sa lumelloeng ke Kramer
- Lisebelisoa tsa elektronike tsa ho lokisa joalo, kapa sesosa sefe kapa sefe se sa amaneng ka kotloloho le bofokoli ba thepa le/kapa moetso oa sehlahisoa sena.
- Tiisetso ena e lekanyelitsoeng ha e koahele mabokose, likabelo tsa thepa, likhoele kapa lisebelisoa tse sebelisoang mmoho le sehlahisoa sena.
- Ntle le ho fokotsa ho qheleloa ka thoko mona, Kramer Electronics ha e fane ka tiiso ea hore sehlahisoa se kenyellelitsoe mona, ho kenyeletsoa. ntle le moedi, thekenoloji le/kapa di-circuits tse kopantsweng) tse kenyeleditsweng sehlahiswang, di ke ke tsa felelwa ke nako kapa hore dintho tse jwalo di tla dula di dumellana le sehlahiswa kapa thekenoloji efe kapa efe eo sehlahiswa se ka sebediswang ka yona.
Kakaretso Ena e Nka Nako e Kae
- Lilemo tse supileng ho tloha khatisong ena; ka kopo sheba rona Web saete bakeng sa tlhahisoleseding ea hona joale le e nepahetseng ka ho fetisisa ea tiisetso.
Ea Koahetsoeng
- Ke moreki oa mantlha feela oa sehlahisoa sena ea koahetsoeng tlas'a tiisetso ena e lekanyelitsoeng. Tiisetso ena e lekanyelitsoeng e ke ke ea fetisetsoa ho bareki ba latelang kapa beng ba sehlahisoa sena.
Seo Kramer Electronics e tla se etsa
- Kramer Electronics, ka boikhethelo ba eona feela, e tla fana ka e 'ngoe ea litlharello tse tharo tse latelang ho isa tekanyong efe kapa efe eo e ka bonang e hlokahala ho khotsofatsa tleleime e nepahetseng tlas'a tiisetso ena e lekanyelitsoeng:
Seo Kramer Electronics e ke keng ea se etsa Tlas'a Tiisetso Ena e Lekanyelitsoeng
Haeba sehlahisoa sena se khutlisetsoa ho Kramer Electronics kapa morekisi ea lumelletsoeng eo se rekiloeng ho eena kapa mokha ofe kapa ofe ea filoeng tumello ea ho lokisa lihlahisoa tsa Kramer Electronics, sehlahisoa sena se tlameha ho ba le inshorense nakong ea thomello, 'me inshorense le litefiso tsa thomello li lefshoe esale pele ke uena. Haeba sehlahisoa sena se khutlisetsoa ntle le inshorense, u nka likotsi tsohle tsa tahlehelo kapa tšenyo nakong ea thomello. Kramer Electronics e ke ke ea ikarabella bakeng sa litšenyehelo leha e le life tse amanang le ho tlosoa kapa ho kenngoa bocha ha sehlahisoa sena ho tloha kapa ho kenngoa leha e le efe. Kramer Electronics e ke ke ea ikarabella bakeng sa litšenyehelo life kapa life tse amanang le ho theha sehlahisoa sena, tokiso efe kapa efe ea taolo ea basebelisi kapa lenaneo lefe kapa lefe le hlokahalang bakeng sa ho kenya sehlahisoa sena.
Mokhoa oa ho Fumana Pheko tlas'a Tiisetso ena e Lekanyelitsoeng
Ho fumana pheko tlas'a tiisetso ena e lekanyelitsoeng, o tlameha ho ikopanya le morekisi ea lumelletsoeng oa Kramer Electronics eo u rekileng sehlahisoa sena ho eena kapa ofisi ea Kramer Electronics e haufi le uena. Bakeng sa lenane la barekisi ba lumelletsoeng ba Kramer Electronics le/kapa bafani ba litšebeletso ba lumelletsoeng ba Kramer Electronics, ka kopo etela rona. web saete ho www.kramerelectronics.com kapa ikopanye le ofisi ea Kramer Electronics e haufi le uena. E le hore u fumane pheko efe kapa efe tlas'a tiisetso ena e lekantsoeng, u tlameha ho ba le rasiti ea mantlha, ea letsatsi e le bopaki ba hore u rekile morekisi ea lumelletsoeng oa Kramer Electronics. Haeba sehlahisoa sena se khutlisetsoa tlas'a tiisetso ena e fokolang, ho tla hlokahala nomoro ea tumello ea ho khutlisa, e fumanoang ho Kramer Electronics. U ka boela ua lebisoa ho morekisi ea lumelletsoeng kapa motho ea lumelletsoeng ke Kramer Electronics ho lokisa sehlahisoa. Haeba ho etsoa qeto ea hore sehlahisoa sena se khutlisetsoe ka ho toba ho Kramer Electronics, sehlahisoa sena se lokela ho kenngoa hantle, ka ho khetheha ka lebokoseng la pele, bakeng sa ho romelloa. Mabokose a se nang nomoro ea tumello ea ho khutlisa a tla hanoa.
Moedi hodima Boikarabelo
BOKGOLO BOKGOLO BA MOLATO OA KRAMER ELECTRONICS TLAS'A TIISETSO ENA E LEKANETSO E KE KE YA FEELA THEKO YA SEBELE YA HO REKA E LEFELLANG SEHLAHISO. HO FIHLELA BOK'MONG TSE KHOLO TSE DUMELLANG KE MOLAO, KRAMER ELECTRONICS HA E NA BOIKARABELO BAKENG SA LITOSEKO TSE TSOANG, TSE KHETHEHILENG, TSA DITIRO KAPA LI LAPELA E BATSOANG KE HO TLOHELA TLHOKOMELISO KAPA MAEMO, KAPA TLAS'A TSA MOLAO EFE KAPA EFE. Linaha tse ling, litereke kapa linaha ha li lumelle ho behelloa ka thoko kapa ho beheloa meeli ea liphallelo, tšenyehelo e khethehileng, e sa lebelloang, e bakiloeng kapa e sa tobang, kapa ho behoa moeli oa sekoloto ho chelete e boletsoeng, ka hona, meeli kapa mekhelo e kaholimo e kanna ea se sebetse ho uena.
Tharollo e Ikhethileng
HO FIHLELA HO FIHLELA HO FIHLELA HO DUMELLA KE MOLAO, TIISETSO ENA E LEKANETSO LE LIPHEKO TSE BITSOANG KA HOLIMO HA LI KHETHEHILENG MME HO E-na le LITIMELO TSE LING TSOHLE, LIPHEKO LE MAEMO TSOHLE, E KA BA KE MORWA KAPA E NGOLITSOE, E BUA KAPA E BONAHALA. HO FIHLELA BOKGOLO BO DUMELLANG KE MOLAO, KRAMER ELECTRONICS E HLOKOMELA LITIISETSO MANG LE TSOHLE, HO kenyeletswa, ntle le meedi, TIISETSO TSA THEKISO LE HO TSHWANELA KA HO HLOKAHALA HO EKETSEHILENG. HAEBA KRAMER ELECTRONICS E KE KE EA ITSOA KA MOLAO KAPA HO HLOKAHALA LITEKELETSO TSE FIHLENG HO TLAS'A MOLAO O SEBELISANG, LITEKISO TSOHLE TSE MAKATLENG TSA SEHLAHISO ENA, HO EKETSEHILENG LE LITEKELETSO TSA THEKISO LE HO SEBELETSA MOSEBETSI OA SEBAKA ENA. MOLAOA. = SEHLAHISO SE MONG LE SEFE SEO TIISETSO ENA E LEKOE E SEBETSANG HO ONA KE "SEHLAHISO SA BABEKI" TLAS'A MOLAO OA TIISETSO EA MAGNUSON- MOSS (15 USCA §2301, ET SEQ.) KAPA MOLAO O MONG O SEBELETSANG, BOITŠOANTŠO JO BO FETILENG FELA WA WARRANTY MOLAO O SEBELISA HO U SEBETSA. DITIISETSO TSOHLE TSE MAKATSOENG SEHLAHONG ENA, HO AKARELETSA DITIISETSO TSA THEKISO LE HO TSHWANELA HO SEBELISA MAIKAELELO A FETILENG, LI TLA SEBEDISA JWALO KA HA HO FUMANETSWE KA TSWELO MOLAO O SEBELISANG.
Maemo a Mang
Tiisetso ena e lekanyelitsoeng e u fa litokelo tse khethehileng tsa molao, 'me u ka ba le litokelo tse ling tse fapaneng ho ea ka linaha kapa linaha. Tiisetso ena e lekanyelitsoeng ha e na thuso haeba
- leibole e nang le nomoro ea serial ea sehlahisoa sena e tlositsoe kapa e sentsoe,
- sehlahisoa ha se abuoe ke Kramer Electronics kapa
- sehlahisoa sena ha se rekoe ho tsoa ho morekisi ea lumelletsoeng oa Kramer Electronics.
Haeba o sa tiisehe hore na morekisi ke morekisi ea lumelletsoeng oa Kramer Electronics, ka kopo etela rona Website at www.kramerelectronics.com kapa ikopanye le ofisi ea Kramer Electronics ho tsoa lethathamong le qetellong ea tokomane ena. Litokelo tsa hau tlasa tiisetso ena e lekanyelitsoeng ha li fokotsehe haeba u sa tlatse le ho khutlisa foromo ea ngoliso ea sehlahisoa kapa ua tlatsa le ho fana ka foromo ea ngoliso ea sehlahisoa sa inthaneteng. Kramer Electronics kea leboha ha u rekile sehlahisoa sa Kramer Electronics. Re tšepa hore e tla u fa lilemo tsa khotsofalo.
Bakeng sa tlhaiso-leseling ea morao-rao ka lihlahisoa tsa rona le lethathamo la barekisi ba Kramer, etela rona Web saete moo lintlafatso tsa bukana ena li ka fumanoang.
Re amohela lipotso, maikutlo le maikutlo a hau.
- Web sebaka: www.kramerav.com.
- E-mail: info@kramerel.com.
- P/N: 2900- 300067
- Tšen: 3
TLHOKOMELISO EA BOPHELO: Tlosa yuniti ho phepelo ea motlakase pele o bula le ho sebeletsa
- MOHLALA: TBUS-4xl Tafole Connection bese
- P/N: 2900-300067 Tšen 3
Litokomane / Lisebelisoa
 |
KRAMER TBUS-4xl Tafole Connection Bese [pdf] Bukana ea Mosebelisi TBUS-4xl Table Connection Bese, TBUS-4xl, Khokahano ea Tafole, Bese |