INSTRUo Cuir Balanced Output Module
Tlhaloso
Instruō cuïr ke karolo ea ho qetelatage output module e etselitsoeng ho hokahana le lisebelisoa tsa mamelwang tsa profeshenale kantle ho modular synthesis ecosystem. Lipontšo tsa boemo ba modular li phahame haholo ampLitude 'me hangata ho chesa haholo bakeng sa li-mixer tsa setso tse akaretsang, li-interface tsa molumo, le lipehelo tsa katara. cuïr e kokobetsa le ho fetola matshwao a sa leka-lekanang a modular ho matshwao a leka-lekanang a boemo ba mola e le hore a be malala-a-laotswe ho kena nakong e tlang.tage ka hare ho tsela ea pontšo. Eketsa ho seo li-headphone tsa eona tsa boleng bo holimo ampli-lifier le li-control tsa motho ka mong, 'me ho hlakile hore cuïr ke sebaka se le seng bakeng sa litlhoko tsa hau tsa tlhahiso ea modular.
Likaroloana
- Boemo ba stereo modular ho isa ho ¼” tlhahiso e leka-lekaneng ea mola
- Ho kenya mono ka ho le letšehali ho ea ho mono o nepahetseng
- Li-headphone tsa boleng bo holimo ampmoqhobi
- Stereo input backjack bakeng sa ho hokahana le mehloli e meng ea back jack-compatible module
- 2 x lithapo tsa boleng bo holimo tsa 150cm li kenyellelitsoe
Ho kenya
- Netefatsa hore sistimi ea synthesizer ea Eurorack e felile.
- Fumana 4 HP ea sebaka ka mokotleng oa hau oa synthesizer oa Eurorack.
- Hokela lehlakore la 10 la thapo ea matla ea IDC ho hlooho ea 2 × 5 ka morao ho module, ho tiisa hore mola o mofubelu o holim'a thapo ea matla o hokahane le -12V.
- Hokela lehlakore la 16 la thapo ea matla ea IDC ho hlooho ea 2 × 8 ho phepelo ea hau ea motlakase ea Eurorack, ho netefatsa hore mola o mofubelu thapong ea matla o hokahane le -12V.
- Kenya Instruō cuïr ka mokotleng oa hau oa synthesizer oa Eurorack.
- Matlafatsa sistimi ea hau ea synthesizer ea Eurorack.
Hlokomela:
Mojule ona o na le ts'ireletso ea reverse polarity. Ho kenngoa ha thapo ea motlakase ho ke ke ha senya module.
Litlhaloso
- Bophara: 4 HP
- botebo: 30 limilimithara
- + 12V: 30mA
- -12V: 30mA
phetisetso
ho fetisa ka sebopeho seseng, ho romela ka hare kapa ka hara ntho, ho tsamaya ka nqa e itseng
Senotlolo
- Kenyo e ka ho le Letshehadi
- Kenyo e nepahetseng
- Le letšehali Channel LED
- Leseli la Leseli la LED
- Left Output
- Sephetho se nepahetseng
- Sephetho sa Li-headphone
- Boemo bo leka-lekaneng
- Boemo ba Li-headphone
- Stereo Input Back Jack
- Orientation Solder Jumpers
Lintho tse kenang
Kenyo e ka ho le Letshehadi: 1/8" (3.5mm) keno ea molumo e sa leka-lekanang.
- Matshwao a matshwao a medumo a modular a teng ho Kenyeletso e ka ho Letshehadi e tla fetolelwa ho boemo ba mola bakeng sa Sephetho sa Le Letshehadi le Output ya Mohala.
- Kenyelletso e Letshehadi e tloaeleha ho Kenyo e Le letona haeba ho se letshwao le teng ho Kenyo e nepahetseng.
Kenyo e nepahetseng: ⅛1/8" (3.5mm) molumo oa molumo o sa leka-lekanang.
- Matshwao a matshwao a medumo a modular a teng ho Kenyeletso e nepahetseng e tla fetolelwa boemong ba mola bakeng sa Output e nepahetseng le Output ya Mohala.
Le letšehali la LED: Pontšo ea LED ea lets'oao la molumo ho Left Output.
- Khanya ea Left Channel LED e amana le ampboholo ba lets'oao la molumo le hlahisoang ho Left Output.
Leseli la Leseli la LED: Pontšo ea LED ea lets'oao la molumo ho Right Output.
- Khanya ea Right Channel LED e amana le ampboholo ba lets'oao la molumo le hlahisoang ho Right Output.
Litholoana
Cuïr e na le li-stereo tsa liphetho tse leka-lekaneng tsa boemo ba mela ka sebopeho sa jack 1/4 ”. Mokhanni oa li-headphone o tšoanang (o sa leka-lekanang) o fana ka mohloli oa bobeli oa ho beha leihlo ka jack e le 'ngoe ea stereo 1/4 ”. Lithapo tsa "1/4" tsa boleng bo holimo li kenyellelitsoe le cuïr. Lithapo tsena li lohiloe, li bolelele ba 150cm, li sirelelitsoe ebile li na le likhokahano tsa TRS tse nang le khauta. Cuïr e na le li-circuits tse ntlafalitsoeng tsa li-audio tse fanang ka liphetho tse kang tse phaphametseng. Liphetho tse leka-lekaneng li fana ka li-conductors tse peli tse bapileng tse nkileng seipone sa lets'oao la mohloli. Letšoao la seipone ke phetoho ea polarity ea ea mantlha 'me e lumella kamore ea hlooho e eketsehileng ho kenyelletsa le ho hana lerata la khokahano e leka-lekaneng. Sena se ntlafatsa haholo likarohano tsa lerata-ho-lerata 'me se ka felisa litaba tsa loop ea fatše pakeng tsa tsamaiso ea modular le s tse latelang.tages ea tsela ea pontšo.
Tlhahiso e ka ho le letšehali: 1/4" (6.35mm) e leka-lekaneng e nang le molumo o tlase oa impedance.
- Matshwao a matshwao a medumo a modular a teng ho Kenyeletso e ka ho Letshehadi e tla fetolelwa ho matshwao a leka-lekaneng a phapano ya boemo ba mela e hlahisitsweng ho Left Output.
Sephetho se nepahetseng: 1/4" (6.35mm) tlhahiso e leka-lekaneng e tlase ea impedance.
- Matshwao a matshwao a medumo a modular a teng ho Kenyeletso e Nepahetseng e tla fetolelwa ho matshwao a lekalekanang a phapano ya boemo ba mela e hlahiswang ho Output e Nepahetseng.
Molumo oa Li-headphone: 1/4" (6.35mm) tlhahiso ea li-headphone. Boemo bo leka-lekaneng: Taolo ea boemo ba letsoho bakeng sa Litholoana tsa Leqele le Le letona.
- Ntlha ea litšupiso ea +4dBU ea phaello ea bonngoe e ka finyelloa ka ho Le letšehali le Liphello tse ka ho le letona ka ho beha konopo ea Balanced Level e le hore sesupo sa kotola se supe ho Left Channel LED.
Nete ea mohala oa hlooho: Taolo ea boemo ba letsoho bakeng sa Output ea Li-headphone.
- Setting ya Boemo ba Mohala wa Mohala o kgethehile mme ha e tsamaellane le setlama sa Balanced Level knob.
Kenyelletso ea Setereo Back Jack: Kenyelletso ea kantle ea stereo e kentsoeng ka morao ho cuïr.
- Li-jacks tsa stereo tsa boemo ba modular tse kentsoeng ka morao ho li-module tsa bobeli li ka hokeloa ho cuïr ka thapo ea stereo ea 1/8” (3.5mm).
- Lintho tse kentsoeng ke 100KΩ tse sa sebetseng 'me kakaretso ea phaello ea bonngoe ka Litlhahiso tse ka ho Le letšehali le ka ho le letona ka pele ho mojule.
Li-Oriental Solder Jumpers: Solder jumper e sebelisoa ho fetola mokhoa oa mojule (Tlhokomeliso! Sena ha se phetoho e bonolo ea faceplate.)
- The cuïr likepe tse nang le 4HP faceplate e nang le litšoantšo tse inverted. Letlapa lena la sefahleho le lokela ho nkuoa e le phanele ea spacer ea 4HP. Ho khutlisetsa phanele mojuleng oa cuïr ho tlameha ho etsoa feela ke setsebi se nang le boiphihlelo. Phetoho leha e le efe e etsoa ka kotsi ea mong'a eona.
- Ho hlokahala tšepe ea solder ho fetola mokhoa o tloaelehileng. E le ho etsa sena, ho qhaqha Seqhobane sa Solder sa Right Orientation Solder Jumper le ho koala Sejumpuli se Fosahetseng sa Orientation Solder ho tla lokisa ho tloaeleha ho tloha ho Le letšehali ho ea ho Kenyo e nepahetseng ka mokhoa o fetotsoeng.
Sengoli sa Buka: Collin Russell Manual Design: Dominic D'Sylva
Sesebelisoa sena se fihlela litlhoko tsa litekanyetso tse latelang: EN55032, EN55103-2, EN61000-3-2, EN61000-3-3, le EN62311.
Litokomane / Lisebelisoa
 |
INSTRUo Cuir Balanced Output Module [pdf] Bukana ea Mosebelisi Cuir, Balanced Output Module, Cuir Balanced Output Module |
