INSTRUo Cuir Balanced Output Module

Kev piav qhia

Instruō cuïr yog qhov kawg stage tso zis module tsim los cuam tshuam nrog cov khoom siv suab sab nraud ntawm cov khoom siv hluav taws xob sib txuas. Modular theem teeb liab yog siab heev ampLitude thiab feem ntau kub heev rau cov tsoos summing mixers, suab interfaces, thiab guitar teebmeem pedals. cuïr attenuates thiab converts unbalanced modular theem teeb liab mus rau balanced kab-theem signals kom lawv npaj txhij mus rau hauv lawv tom ntej stage nyob rau hauv lub teeb liab txoj kev. Ntxiv rau qhov ntawd nws lub mloog pob ntseg zoo amplifier thiab tus kheej attenuation tswj, thiab nws yog qhov tseeb tias cuïr yog ib lub khw rau tag nrho koj cov kev xav tau ntawm cov khoom tsim tawm.

Nta

• Stereo modular theem rau ¼ "balanced line output
• Sab laug mono input normals rau txoj cai mono input
• Lub mloog pob ntseg zoo ampua neej nyob
• Stereo input backjack rau kev cuam tshuam nrog lwm qhov rov qab jack-compatible module qhov chaw
• 2 x zoo 150cm sib npaug cables suav nrog

Kev teeb tsa

1. Paub meej tias Eurorack synthesizer system raug kaw.
2. Nrhiav 4 HP ntawm qhov chaw hauv koj rooj plaub Eurorack synthesizer.
3. Txuas 10 tus pin sab ntawm IDC fais fab cable mus rau 2 × 5 tus pin header nyob rau sab nraum qab ntawm lub module, paub meej tias cov kab liab liab ntawm lub hwj chim cable txuas nrog -12V.
4. Txuas 16 tus pin sab ntawm IDC fais fab cable mus rau 2 × 8 tus pin header ntawm koj lub zog hluav taws xob Eurorack, lees tias cov kab liab liab ntawm lub hwj chim cable txuas nrog -12V.
5. Mount lub Instruō cuïr hauv koj rooj plaub Eurorack synthesizer.
6. Fais fab koj lub Eurorack synthesizer rau.

Nco tseg:
Cov module no muaj kev tiv thaiv rov qab polarity. Inverted installation ntawm lub hwj chim cable yuav tsis ua puas lub module.

Specifications

• Dav: 4 HP
• Qhov tob: 30mm
• + 12V: 30mA
• -12V: 30mA

kev hloov pauv

xa mus rau lwm daim ntawv, xa mus rau hauv lossis los ntawm ib yam dab tsi, txav mus rau hauv ib qho kev taw qhia

Ntsiab

1. Sab laug Input
2. Txoj cai nkag
3. Sab laug Channel LED
4. Txoj cai Channel LED
5. Sab laug tso zis
6. Txoj cai tso zis
7. Lub mloog pob ntseg tso zis
8. Ntsuas qib
9. Lub mloog pob ntseg Level
10. Stereo Input Back Jack
11. Orientation Solder Jumpers

Cov tswv yim

Sab laug Input: 1/8 "(3.5mm) mono unbalanced audio input.

• Modular theem suab signals tam sim no nyob rau sab laug Input yuav hloov mus rau kab theem rau sab laug tso zis thiab lub mloog pob ntseg tso zis.
• Sab laug Input normalises rau txoj cai nkag yog tias tsis muaj teeb liab tshwm sim ntawm Txoj Cai Input.

Txoj cai nkag: ⅛ 1/8 "(3.5mm) mono unbalanced audio input.

• Modular theem suab teeb liab tam sim no nyob rau ntawm Txoj Cai Input yuav hloov mus rau kab theem rau Txoj Cai Tso Tawm thiab Lub Taub Hau Taub Hau.

Sab laug Channel LED: LED qhia txog lub suab teeb liab ntawm sab laug tso zis.

• Lub brightness ntawm Sab laug Channel LED yog txheeb ze rau amplitude ntawm lub suab teeb liab tsim nyob rau sab laug tso zis.

Txoj cai Channel LED: LED qhia txog lub suab teeb liab ntawm Txoj Cai Tso Tawm.

• Lub brightness ntawm Txoj Cai Channel LED yog txheeb ze rau amplitude ntawm lub suab teeb liab tsim nyob rau ntawm txoj cai Output.

Cov zis

Lub cuïr nta ib lub tso suab ntawm cov kab sib txawv sib txawv-theem tso tawm hauv 1/4 "tso zis jack hom. Ib qho kev sib txuas (tsis sib npaug) lub mloog pob ntseg tsav tsheb / kab tso zis muab qhov chaw saib xyuas thib ob ntawm ib lub tso suab 1/4 "tso zis tawm. Ib khub ntawm qhov zoo sib npaug 1/4 "cables nrog rau cov cuïr. Cov cables no yog braided, 150cm ntev, shielded thiab feature kub plated TRS hu. Lub cuïr nta ib khub ntawm optimized audio kab tsav circuits uas muab transformer zoo li floating outputs. Qhov sib npaug sib txawv outputs muab ob qho tib si conductors nqa ib khub mirrored ntawm lub teeb liab. Cov teeb liab mirrored yog ib qho polarity inversion ntawm tus thawj thiab tso cai rau lub taub hau ntxiv ntxiv rau qhov sib npaug sib txuas qhov tseem ceeb ntawm hom suab nrov tsis lees paub. Qhov no zoo heev txhim kho cov teeb liab-rau-suab nrov sib piv thiab tuaj yeem tshem tawm cov teeb meem hauv av ntawm lub modular system thiab tom qab stages ntawm lub teeb liab txoj kev.

Sab laug tso zis: 1/4 "(6.35mm) balanced low impedance audio output.

• Modular theem suab teeb liab tam sim no nyob rau sab laug Input yuav hloov mus rau qhov sib npaug sib txawv kab-theem teeb liab tsim tawm ntawm Sab laug tso zis.

Txoj cai tso zis: 1/4 "(6.35mm) sib npaug qis impedance suab tso zis.

• Modular theem suab signals tam sim no ntawm Txoj Cai Input yuav raug hloov mus rau qhov sib npaug sib txawv kab-theem teeb liab uas tsim tawm ntawm Txoj Cai Tso Tawm.

Lub mloog pob ntseg tso zis: 1/4 "(6.35mm) lub mloog pob ntseg tso zis. Theem Balanced: Phau ntawv tswj theem rau sab laug thiab txoj cai tso zis.

• Ib qho kev taw qhia ntawm +4dBU kev sib koom ua ke tuaj yeem ua tiav ntawm Sab laug thiab Txoj Cai Tso Tawm los ntawm kev teeb tsa Qhov Ntsuas Qhov Ntsuas kom lub pob qhov taw qhia taw qhia rau sab laug Channel LED.

Qib lub mloog pob ntseg: Kev tswj theem tswj rau lub mloog pob ntseg tso zis.

• Lub Headphone Level knob setting yog discrete thiab tsis sib haum mus rau Balanced Level knob setting.

Stereo Input Back Jack: Sab nraud tso suab input mounted rau sab nraum qab ntawm cuïr.

• Modular theem tso zis tso suab jacks mounted nyob rau sab nraum qab ntawm lwm yam modules yuav txuas nrog cuïr ntawm ib tug 1/8 "(3.5mm) stereo cable.
• Inputs yog 100KΩ impedance thiab sum ntawm kev sib sau ua ke nrog rau sab laug thiab txoj cai inputs nyob rau hauv pem hauv ntej ntawm lub module.

Orientation Solder Jumpers: Ib tug solder jumper yog siv los hloov cov kev taw qhia ntawm lub module (Ceeb toom! Qhov no tsis yog ib tug yooj yim faceplate hloov.)

• Lub cuïr nkoj nrog 4HP faceplate nrog inverted graphics. Lub faceplate no yuav tsum tsuas yog suav tias yog 4HP spacer vaj huam sib luag. Retrofitting lub vaj huam sib luag ntawm lub cuïr module yuav tsum tsuas yog ua los ntawm tus kws tshaj lij. Txhua qhov kev hloov kho yog ua tiav ntawm kev pheej hmoo ntawm tus tswv.
• Ib tug soldering hlau yuav tsum tau thim rov qab cov tswv yim ib txwm. Yuav kom ua tau li no, desoldering Txoj Cai Orientation Solder Jumper thiab bridging qhov tsis ncaj ncees lawm Orientation Solder Jumper yuav kho normalization ntawm sab laug nkag mus rau sab xis input nyob rau hauv lub inverted layout.

Phau Ntawv Sau: Collin Russell Phau Ntawv Tsim: Dominic D'Sylva

Cov cuab yeej no ua tau raws li cov qauv hauv qab no: EN55032, EN55103-2, EN61000-3-2, EN61000-3-3, thiab EN62311.

Cov ntaub ntawv / Cov ntaub ntawv

INSTRUo Cuir Balanced Output Module [ua pdf] Tus neeg siv phau ntawv Cuir, Balanced Output Module, Cuir Balanced Output Module

Cov ntaub ntawv

• Cov neeg siv phau ntawv