InSTRUo Cuir Madaidaitan Fitar Module

Bayani

Instruō cuïr shine s na ƙarshetage fitarwa na'ura wanda aka ƙera don yin mu'amala tare da ƙwararrun kayan aikin mai jiwuwa a waje da tsarin yanayin haɗin kai na zamani. Sigina matakin daidaitawa suna da girma sosai amplitude kuma sau da yawa yana da zafi sosai don mahaɗar taro na al'ada, mu'amalar sauti, da kuma tasirin tasirin guitar. cuïr yana ragewa kuma yana jujjuya siginoni marasa daidaituwa marasa daidaituwa zuwa daidaitattun sigina na matakin layi ta yadda a shirye suke su shiga s na gaba.tage cikin hanyar sigina. Ƙara wa waccan wayar sa mai inganci amplifier da sarrafa attenuation na mutum ɗaya, kuma a bayyane yake cewa cuïr shine shagon tsayawa ɗaya don duk buƙatun fitowar ku na zamani.

Siffofin

• Matakan sitiriyo na zamani zuwa ¼” daidaitaccen fitowar layin
• Shigar mono na hagu yana daidaita al'ada zuwa shigarwar mono na dama
• Na'urar kai mai inganci amplififi
• Sitiriyo shigarwar jack jack don yin hulɗa tare da sauran tushen jack jack-jack jack jack
• 2 x babban ingancin 150cm daidaitattun igiyoyi sun haɗa

Shigarwa

1. Tabbatar da cewa tsarin haɗin gwiwar Eurorack yana kashe.
2. Nemo 4 HP na sarari a cikin akwati na haɗin gwiwar Eurorack.
3. Haɗa gefen fil ɗin 10 na kebul na wutar lantarki na IDC zuwa madaidaicin fil na 2 × 5 a bayan ƙirar, yana mai tabbatar da cewa an haɗa jajayen igiyar wutar lantarki zuwa -12V.
4. Haɗa gefen fil ɗin 16 na kebul na wutar lantarki na IDC zuwa madaidaicin fil na 2 × 8 akan samar da wutar lantarki ta Eurorack, yana mai tabbatar da cewa an haɗa jajayen igiyar wutar lantarki zuwa -12V.
5. Dutsen Instruō cuïr a cikin akwati na haɗin gwiwar Eurorack.
6. Kunna tsarin haɗin gwiwar ku na Eurorack.

Lura:
Wannan tsarin yana da kariyar juzu'i. Juyawa shigar da kebul na wuta ba zai lalata tsarin ba.

Ƙayyadaddun bayanai

• Nisa: 4 HP
• zurfin: 30mm
• + 12V: 30mA
• -12V: 30mA

transmutation

isarwa zuwa wani nau'i, aika cikin ko ta wani abu, don matsawa cikin ƙayyadadden shugabanci

Maɓalli

1. Shigar Hagu
2. Shigar Dama
3. LED Channel na Hagu
4. LED Channel Dama
5. Fitowar Hagu
6. Fitowar Dama
7. Fitar da lasifikan kai
8. Madaidaicin Matsayi
9. Matakan belun kunne
10. Sitiriyo Input Back Jack
11. Watsawa Solder Jumpers

Abubuwan shigarwa

Shigar Hagu: 1/8" (3.5mm) shigar da sauti na mono mara daidaituwa.

• Siginonin sauti na matakin daidaitawa da ke wurin Shigarwar Hagu za a canza su zuwa matakin layi don Fitowar Hagu da Fitowar Lasifikan kai.
• Shigarwar Hagu tana daidaita daidaitattun shigar da dama idan babu sigina a Input Dama.

Shigar Dama: ⅛1/8" (3.5mm) shigar da sauti na mono mara daidaituwa.

• Siginonin sauti na matakin daidaitawa da ke cikin Input Dama za a canza su zuwa matakin layi don Fitowar Dama da Fitowar Lasifikan kai.

LED Channel na Hagu: Nunin LED na siginar sauti a Fitowar Hagu.

• Hasken LED Channel na Hagu yana da alaƙa da ampyanayin siginar sauti da aka samar a Fitowar Hagu.

LED Channel Dama: Alamar LED na siginar sauti a Fitar Dama.

• Hasken LED Channel Dama yana da alaƙa da amplitude na siginar sauti da aka samar a Dama Dama.

Abubuwan da aka fitar

Cuïr yana fasalta nau'in sitiriyo guda biyu na daidaitattun matakan matakin layin layi a cikin 1/4" tsarin jack fitarwa. Direba / fitarwar layi na layi ɗaya (mara daidaita) yana ba da tushen sa ido na biyu ta hanyar jack ɗin fitarwa na sitiriyo guda 1/4. Biyu na madaidaitan igiyoyi 1/4" masu inganci suna haɗa tare da cuïr. Waɗannan igiyoyi an ɗaure su, tsayin 150cm, kariya kuma suna da alamun lambobin TRS masu launin zinari. Cuïr yana fasalta ingantattun hanyoyin da'irori na layukan odiyo waɗanda ke ba da fitattun kayan wuta kamar na iyo. Madaidaicin fitowar abubuwan banbance-banbance suna ba da madugu biyu masu kamanceceniya da ke ɗauke da madubi guda biyu na siginar tushe. Siginar da aka yi madubi juzu'i ce ta asali kuma tana ba da damar ƙarin ɗakin kai ban da madaidaicin haɗin kai na kin amincewar yanayin gama gari. Wannan yana haɓaka ƙimar sigina-zuwa amo sosai kuma yana iya kawar da al'amuran madauki na ƙasa tsakanin tsarin na zamani da na gaba.taghanyar sigina.

Fitowar Hagu: 1/4" (6.35mm) daidaitaccen fitowar sauti mai ƙarancin ƙarfi.

• Sigina mai jiwuwa matakin daidaitawa da ke cikin Shigarwar Hagu za a canza su zuwa daidaitattun sigina na matakin layin da aka samar a Fitowar Hagu.

Fitowar Dama: 1/4" (6.35mm) daidaitaccen fitowar sauti mai ƙarancin ƙarfi.

• Siginonin sauti na matakin daidaitacce da ke akwai a Input Dama za a canza su zuwa madaidaitan sigina na matakin layin da aka samar a Fitowar Dama.

Fitar da lasifikan kai: 1/4" (6.35mm) fitowar lasifikan kai. Madaidaicin Matsayi: Ikon matakin jagora na Hagu da Abubuwan Dama.

• Za'a iya samun ma'anar ma'anar haɗin kai na + 4dBU a Hagu da Abubuwan Dama ta hanyar saita Ƙaƙwalwar Ƙaƙwalwar Ƙaƙwalwar Ƙaƙwalwar Ƙaƙwalwar Ƙaƙwalwar Ƙwararrun Ƙwararrun Ƙwararrun Ƙwararrun Ƙwararrun Ƙwararrun Ƙwararrun Ƙwararrun Ƙwararru na Hagu.

Matakan belun kunne: Ikon matakin hannun hannu don Fitar da Wayar kai.

• Saitin kulli na Matakan Jilun kunne yana da hankali kuma baya dacewa da Ma'auni Madaidaicin Matsakaicin Matsakaicin Matsayi.

Sitiriyo Input Back Jack: shigarwar sitiriyo na waje an saka shi zuwa bayan cuïr.

• Za'a iya haɗa jacks ɗin fitarwa na matakin sitiriyo na zamani waɗanda aka ɗora a baya na na'urori na biyu zuwa cuïr ta hanyar kebul na sitiriyo 1/8" (3.5mm).
• Abubuwan shigarwa sune 100KΩ impedance da jimla a samun haɗin kai tare da Abubuwan Hagu da Dama a gaban tsarin.

Jagoran Solder Jumpers: Ana amfani da tsalle-tsalle don canza yanayin yanayin tsarin (Gargadi! Wannan ba sauƙi bane maye gurbin farantin fuska.)

• Cuïr yana jigilar kaya tare da farantin fuska na 4HP tare da jujjuyawar zane. Wannan farantin ya kamata a yi la'akari da shi azaman 4HP spacer panel. Sake gyara panel akan tsarin cuïr dole ne ƙwararren masani ne kawai ya yi shi. Ana yin duk wani gyare-gyare a cikin haɗarin mai shi.
• Ana buƙatar ƙarfe don juyar da shigarwar akai-akai. Don yin wannan, soker da Jumper na Hannun Hannun Dama da haɗa Jumper ɗin da ba daidai ba zai gyara daidaitawa daga Shigarwar Hagu zuwa Shigar Dama a cikin jujjuyawar shimfidar wuri.

Mawallafi na Manual: Collin Russell Manual Design: Dominic D'Sylva

Wannan na'urar ta cika buƙatun ma'auni masu zuwa: EN55032, EN55103-2, EN61000-3-2, EN61000-3-3, da EN62311.

Takardu / Albarkatu

InSTRUo Cuir Madaidaitan Fitar Module [pdf] Manual mai amfani Cuir, Madaidaicin Module na Fitowa, Madaidaicin Madaidaicin Fitar Module

Magana

• Manual mai amfani