Litaba pata
1 ESPC6WROOM1 N16 Module Espressif Sistimi
2 Litaelo tsa Tšebeliso ea Sehlahisoa
3 Module Overview
4 Pin Litlhaloso
5 Qala
6 Polelo ea US FCC
7 Liantenna
8 Setatemente sa Canada sa indasteri
9 Litokomane tse Amanang le Lisebelisoa
10 Lipotso Tse Botsoang Hangata
11 Litokomane / Lisebelisoa
11.1 Litšupiso

espressif-logo

ESPC6WROOM1 N16 Module Espressif Sistimi

ESPC6WROOM1-N16-Module-Espressif-System-PRODUCT

Litlhaloso

  • Lebitso la Mojule: ESP32-C6-WROOM-1
  • Khokahano e se nang mohala: Wi-Fi, IEEE 802.15.4, Bluetooth LE
  • Motlakase: ESP32-C6, 32-bit RISC-V single-core
  • Likhetho tsa Flash: 4MB, 8MB, 16MB (Quad SPI)

Litaelo tsa Tšebeliso ea Sehlahisoa

Qala

 Seo U se Hlokang

Ho qala ka mojule oa ESP32-C6-WROOM-1, o tla hloka:

  • Lethathamo la lintlha tsa ESP32-C6-WROOM-1
  • Likarolo tsa Hardware bakeng sa khokahano
  • Tlhophiso ea tikoloho ea ntlafatso

Khokahano ea Hardware

Sheba setšoantšo sa sebopeho sa phini bakeng sa ho hokahanya likarolo tsa hardware tse hlokahalang mojuleng.

Theha Tikoloho ea Ntlafatso

  • Kenya Litlhoko tse hlokahalang: Kenya lisebelisoa tse hlokahalang tsa software ho latela litlhoko.
  • Fumana ESP-IDF: Fumana ESP-IDF (Espressif IoT Development Framework) bakeng sa nts'etsopele.
  • Seta Lisebelisoa: Lokisa lisebelisoa tsa ntlafatso tse hlokahalang bakeng sa ho etsa mananeo.
  • Hlophisa Liphetoho tsa Tikoloho: Theha maemo a fapaneng a tikoloho bakeng sa tikoloho ea ntlafatso.

Theha Morero oa Hao oa Pele
Latela mehato ena ho theha projeke ea hau ea pele ka module ea ESP32-C6-WROOM-1:

  1. Qala Morero: Qala morero o mocha tikolohong ea hau ea ntlafatso.
  2. Hokela Sesebediswa sa Hao: Hokela module oa ESP32-C6-WROOM-1 ho seta sa hau sa nts'etsopele.
  3. Lokisa: Lokisa litlhophiso tsa projeke le li-peripherals ha ho hlokahala.
  4. Theha Morero: Theha morero oa ho hlahisa firmware.
  5. Khanya ho Sesebediswa: Kenya firmware ho module ea ESP32-C6-WROOM-1.
  6. Hlokomela: Lekola tlhahiso le boitšoaro ba morero oa hau.

Mojule o tshehetsang 2.4 GHz Wi-Fi 6 (802.11 ax), Bluetooth® 5 (LE), Zigbee le Thread
(802.15.4)
E hahiloe ho pota-pota ESP32-C6 letoto la li-SoCs, 32-bit RISC-V single-core microprocessor
Flash ho fihla ho 16 MB
Li-GPIO tse 23, li-peripheral tse ngata
Antenna ea PCB e ka har'a board

Module Overview

Likaroloana

  • CPU le Memori ea On-Chip
    • ESP32-C6 e kentsoeng, 32-bit RISC-V single-core microprocessor, ho fihla ho 160 MHz
    • Tlhaloso: 320 KB
    • HP SRAM: 512 KB
    • LP SRAM: 16 KB
  • WiFi
    • 1T1R ho sehlopha sa 2.4 GHz
    • Nako ea ho sebetsa: 2412 ~ 2462 MHz
    • IEEE 802.11ax-e lumellanang
      • 20 MHz-feela e seng mokhoa oa AP
      • MCS0 ~MCS9
      • Uplink le downlink OFDMA, haholo-holo e loketseng bakeng sa likhokahano tsa nako e le 'ngoe libakeng tse nang le batho ba bangata
      • Downlink MU-MIMO (lisebelisoa tse ngata, tse ngata, tse ngata, tse ngata) ho eketsa matla a marang-rang
      • Beamformee e ntlafatsang boleng ba matšoao
      • Pontšo ea boleng ba kanale (CQI)
      • DCM (dual carrier modulation) ho ntlafatsa matla a khokahanyo
      • Tšebeliso ea sebaka hape ho holisa phetisetso e bapileng
      • Nako ea ho tsoha e reriloeng (TWT) e ntlafatsang mekhoa ea ho boloka matla
    • E lumellana ka botlalo le protocol ea IEEE 802.11b/g/n
      • 20 MHz le 40 MHz bandwidth
      • Sekhahla sa data ho fihla ho 150 Mbps
      • Multimedia ea Wi-Fi (WMM)
      • TX/RX A-MPDU, TX/RX A-MSDU
      • Hang-hang Block ACK
      • Ho arohana le ho qhekella
      • Monyetla oa ho fetisa (TXOP)
      • Tlhokomelo e iketsang ea Beacon (hardware TSF)
      • 4 × marang-rang a sebele a Wi-Fi
      • Ts'ehetso ea nako e le 'ngoe bakeng sa Infrastructure BSS ka mokhoa oa Seteishene, mokhoa oa SoftAP, Seteishene + SoftAP mode, le mokhoa oa boitšoaro bo hlephileng.
        Hlokomela hore ha ESP32-C6 e hlahloba ka mokhoa oa Seteishene, mocha oa SoftAP o tla fetoha hammoho le mocha oa Seteishene.
      • 802.11mc FTM
  • Bluetooth®
    • Bluetooth LE: Bluetooth 5.3 e netefalitsoe
    • Bluetooth mesh
    • Mokhoa o phahameng oa matla
    • Lebelo: 1 Mbps, 2 Mbps
    • Katoloso ea papatso
    • Lipapatso tse ngata
    • Algorithm ea khetho ea kanale #2
    • LE taolo ea matla
    • Mokhoa oa ka hare oa ho phela hammoho pakeng tsa Wi-Fi le Bluetooth ho arolelana lenakana le tšoanang
  • EEE 802.15.4
    • E lumellana le protocol ea IEEE 802.15.4-2015
    • OQPSK PHY ho sehlopha sa 2.4 GHz
    • Sekhahla sa data: 250 Kbps
    • Khoele 1.3
    • Zigbee 3.0
  • Pheripherals
    • GPIO, SPI, IO interface e tšoanang, UART, I2C, I2S,RMT (TX/RX), pulse counter, LED PWM, USB Serial/JTAG molaoli, MCPWM, SDIO2.0 molaoli oa makhoba, GDMA, TWAI® controller, on-chip debug functionality ka J.TAG, ketsahalo ea matrix, ADC, sensor ea mocheso, li-timers tsa sepheo se akaretsang, li-timers tsa ho shebella, jj.
      Likarolo tse Kopantsoeng ho Module
    • 40 MHz kristale oscillator
    • SPI flash
  • Likhetho tsa Antenna
    • Antenna ea PCB e ka har'a board
  • Maemo a Tshebetso
    • Tshebetso voltage/Phepelo ea Matla: 3.0 ~ 3.6 V
    • Thempereichara ea tikoloho e sebetsang:
      • 85 °C phetolelo ea mojule: -40 ~ 85 °C
      • 105 °C phetolelo ea mojule: -40 ~ 105 °C

Tlhaloso

ESP32-C6-WROOM-1 ke Wi-Fi ea sepheo se akaretsang, IEEE 802.15.4, le mojule oa Bluetooth LE. Seteishene se ruileng sa li-peripherals le ts'ebetso e phahameng li etsa hore mojule e be khetho e nepahetseng bakeng sa matlo a bohlale, li-automation tsa indasteri, tlhokomelo ea bophelo bo botle, lisebelisoa tsa elektroniki tsa bareki, jj.
Mojule oa ESP32-C6-WROOM-1 o na le lebone la kantle la SPI.

Lintlha tsa ho odara tsa ESP32-C6-WROOM-1 li tjena:

Lethathamo la 1: Lintlha tsa ho Odara tsa ESP32-C6-WROOM-1

Khoutu ea ho Odara Khanya Ambient Temp.

(°C)

 Boholo

(mm)
ESP32-C6-WROOM-1-N4 4 MB (Quad SPI) -40 ~ 85  

 

18.0 × 25.5 × 3.1
ESP32-C6-WROOM-1-H4 -40 ~ 105
ESP32-C6-WROOM-1-N8 8 MB (Quad SPI) -40 ~ 85
ESP32-C6-WROOM-1-N16 16 MB (Quad SPI)

Motheong oa mojule ona ke ESP32-C6, processor ea 32-bit RISC-V e le 'ngoe ea mantlha.

ESP32-C6 e kopanya lisebelisoa tse ngata tse kenyelletsang SPI, interface ea IO e tšoanang, UART, I2C, I2S, RMT (TX/RX), LED PWM, USB Serial/JTAG molaoli, MCPWM, SDIO2.0 molaoli oa makhoba, GDMA, TWAI® controller, on-chip debug functionality ka J.TAG, ketsahalo ea matrix, hammoho le ho fihla ho 23 GPIOs, joalo-joalo.

Hlokomela:
Bakeng sa tlhaiso-leseling e batsi ka ESP32-C6, ka kopo sheba ho Lethathamo la lintlha tsa ESP32-C6.

Pin Litlhaloso

Sebopeho sa Pin
Setšoantšo sa phini se ka tlase se bonts'a sebaka se hakanyetsoang sa liphini mojulung.

ESPC6WROOM1-N16-Module-Espressif-System-FIG- (1)

Tlhaloso ea Pin
Mojule ona o na le lintlha tse 29. Sheba litlhaloso tsa phini ho Litlhaloso tsa Tafole ea 2.
Bakeng sa litlhophiso tsa peripheral pin, ka kopo sheba ho Lethathamo la lintlha tsa ESP32-C6.

Lethathamo la 2: Pin Litlhaloso

Lebitso Che. Mofuta1 Mosebetsi
GND 1 P Fatše
3V3 2 P Phepelo ea motlakase
EN 3 I Holimo: e buletsoe, e nolofalletsa chip. Tlase: e tima, chip ea tima.

Tlhokomeliso: Se ke oa siea phini ea EN e phaphametse.
IO4 4 I/O/T MTMS, GPIO4, LP_GPIO4, LP_UART_RXD, ADC1_CH4, FSPIHD
IO5 5 I/O/T MTDI, GPIO5, LP_GPIO5, LP_UART_TXD, ADC1_CH5, FSPIWP
IO6 6 I/O/T MTCK, GPIO6, LP_GPIO6, LP_I2C_SDA, ADC1_CH6, FSPICLK
IO7 7 I/O/T MTDO, GPIO7, LP_GPIO7, LP_I2C_SCL, FSPID
IO0 8 I/O/T GPIO0, XTAL_32K_P, LP_GPIO0, LP_UART_DTRN, ADC1_CH0
IO1 9 I/O/T GPIO1, XTAL_32K_N, LP_GPIO1, LP_UART_DSRN, ADC1_CH1
IO8 10 I/O/T GPIO8
IO10 11 I/O/T GPIO10
IO11 12 I/O/T GPIO11
IO12 13 I/O/T GPIO12, USB_D-
IO13 14 I/O/T GPIO13, USB_D+
IO9 15 I/O/T GPIO9
IO18 16 I/O/T GPIO18, SDIO_CMD, FSPICS2
IO19 17 I/O/T GPIO19, SDIO_CLK, FSPICS3
IO20 18 I/O/T GPIO20, SDIO_DATA0, FSPICS4
IO21 19 I/O/T GPIO21, SDIO_DATA1, FSPICS5
IO22 20 I/O/T GPIO22, SDIO_DATA2
IO23 21 I/O/T GPIO23, SDIO_DATA3
NC 22 — NC
IO15 23 I/O/T GPIO15
EA-RXD0 24 I/O/T U0RXD, GPIO17, FSPICS1
EA-0 25 I/O/T U0TXD, GPIO16, FSPICS0
IO3 26 I/O/T GPIO3, LP_GPIO3, LP_UART_CTSN, ADC1_CH3
IO2 27 I/O/T GPIO2, LP_GPIO2, LP_UART_RTSN, ADC1_CH2, FSPIQ
GND 28 P Fatše
EPAD 29 P Fatše

1 P: phepelo ea motlakase; Ke: ho kenya; O: tlhahiso; T: impedance e phahameng.

Qala

Seo U se Hlokang
Ho theha lits'ebetso tsa module o hloka:

  • 1 x ESP32-C6-WROOM-1
  • 1 x Boto ea tlhahlobo ea Espressif RF
  • 1 x USB-to-Serial board
  • 1 x Thapo ea Micro-USB
  • 1 x PC e sebelisang Linux

Tataisong ena ea basebelisi, re nka sistimi ea ts'ebetso ea Linux joalo ka example. Bakeng sa tlhaiso-leseling e batsi mabapi le tlhophiso ea Windows le macOS, ka kopo sheba ho ESP-IDF Programming Guide.

Khokahano ea Hardware

  1. Solder ESP32-C6-WROOM-1 module ho boto ea tlhahlobo ea RF joalo ka ha ho bonts'itsoe ho Setšoantšo sa 2.ESPC6WROOM1-N16-Module-Espressif-System-FIG- (2)
  2. Hokela boto ea tlhahlobo ea RF ho boto ea USB-to-Serial ka TXD, RXD, le GND.
  3. Hokela boto ea USB-to-Serial ho PC.
  4. Hokela boto ea tlhahlobo ea RF ho PC kapa adaptara ea matla ho nolofalletsa phepelo ea matla a 5 V, ka thapo ea Micro-USB.
  5. Nakong ea ho jarolla, hokela IO9 ho GND ka jumper. Ebe, bula "ON" boto ea tlhahlobo.
  6. Khoasolla firmware ho Flash. Ho fumana lintlha, sheba likarolo tse ka tlase.
  7. Kamora ho jarolla, tlosa jumper ho IO9 le GND.
  8. Matlafatsa boto ea tlhahlobo ea RF hape. Module o tla fetohela ho mokhoa oa ho sebetsa. Chip e tla bala mananeo ho tloha ho flash ha e qala.

Hlokomela:
IO9 e phahame ka hare ho naha. Haeba IO9 e setetsoe ho hula, ho khethoa mokhoa oa Boot. Haeba phini ena e hulela fatše kapa e tlohetsoe e phaphametse, the
Ho khethiloe mokhoa oa ho jarolla. Bakeng sa tlhaiso-leseling e batsi ka ESP32-C6-WROOM-1, ka kopo sheba ho Lethathamo la Letoto la ESP32-C6.

Theha Tikoloho ea Ntlafatso
Espressif IoT Development Framework (ESP-IDF ka bokhutšoanyane) ke moralo oa ho ntlafatsa lits'ebetso tse thehiloeng ho Espressif ESP32. Basebelisi ba ka etsa lits'ebetso ka ESP32-C6 ho Windows/Linux/macOS e thehiloeng ho ESP-IDF. Mona re nka sistimi ea ts'ebetso ea Linux joalo ka example.

  1. Kenya lintho tse hlokahalang
    Ho kopanya le ESP-IDF o hloka ho fumana liphutheloana tse latelang:
    • CentOS 7 & 8:ESPC6WROOM1-N16-Module-Espressif-System-FIG- (3)
    • Ubuntu le Debian:ESPC6WROOM1-N16-Module-Espressif-System-FIG- (4)
    • Arch:ESPC6WROOM1-N16-Module-Espressif-System-FIG- (5)
      Hlokomela:
      • Tataiso ena e sebelisa directory ~/esp ho Linux joalo ka foldara ea ho kenya ESP-IDF.
      • Hopola hore ESP-IDF ha e tšehetse libaka litseleng.
  2. Fumana ESP-IDF
    Ho aha lits'ebetso tsa module ea ESP32-C6-WROOM-1, o hloka lilaebrari tsa software tse fanoeng ke Espressif ho Sebaka sa polokelo ea ESP-IDF.
    Ho fumana ESP-IDF, theha bukana ea ho kenya (~/esp) ho khoasolla ESP-IDF le ho kopanya polokelo ka 'git clone':ESPC6WROOM1-N16-Module-Espressif-System-FIG- (6)
    ESP-IDF e tla khoasolloa ho ~/esp/esp-idf. Buisana Liphetolelo tsa ESP-IDF bakeng sa tlhahisoleseling mabapi le mofuta oa ESP-IDF o ka sebelisoang maemong a itseng.
  3. Hlophisa Lisebelisoa
    Ntle le ESP-IDF, o boetse o hloka ho kenya lisebelisoa tse sebelisoang ke ESP-IDF, tse kang compiler, debugger, Python packages, joalo-joalo ESP-IDF e fana ka mongolo o bitsoang 'install.sh' ho thusa ho hlophisa lisebelisoa ka nako e le 'ngoe.ESPC6WROOM1-N16-Module-Espressif-System-FIG-22
  4. Theha Liphetoho tsa Tikoloho
    Lisebelisoa tse kentsoeng ha li e-so kenyellelitsoe ho phapano ea tikoloho ea PATH. Ho etsa hore lisebelisoa li sebelisoe ho tsoa moleng oa taelo, mefuta e meng ea tikoloho e tlameha ho hlophisoa. ESP-IDF e fana ka mongolo o mong oa 'export.sh' o etsang joalo. Ho terminal moo o tla sebelisa ESP-IDF, matha:ESPC6WROOM1-N16-Module-Espressif-System-FIG-23

Joale tsohle li se li lokile, u ka theha projeke ea hau ea pele ho mojule oa ESP32-C6-WROOM-1.

Theha Morero oa Hao oa Pele

  1. Qala Morero
    Joale u se u loketse ho lokisa kopo ea hau ea mojule oa ESP32-C6-WROOM-1. U ka qala ka qala/hello_world morero ho tloha examples directory ho ESP-IDF.
    Kopitsa ho qala/hello_world ho ~/esp directory:ESPC6WROOM1-N16-Module-Espressif-System-FIG-24Ho na le mefuta e mengata ea example merero ka mohlalaampLes directory ho ESP-IDF. O ka kopitsa morero ofe kapa ofe ka tsela e ts'oanang le e hlahisitsoeng ka holimo mme oa e tsamaisa. Hape hoa khoneha ho haha ​​​​examps in-place, ntle le ho li kopitsa pele.
  2. Kopanya Sesebelisoa sa Hau
    Joale hokela mojule oa hau komporong 'me u hlahlobe hore na mojule oa hau o bonahala tlas'a boema-kepe bofe ba serial. Likou tsa serial ho Linux li qala ka '/ dev/tty' ka mabitso a bona. Matha taelo e ka tlase ka makhetlo a mabeli, pele ka boto e sa kengoa, ebe e kentsoe. Boema-kepe bo hlahang lekhetlo la bobeli ke bona boo u bo hlokang:ESPC6WROOM1-N16-Module-Espressif-System-FIG-25
    Hlokomela:
    Boloka lebitso la boema-kepe le le haufi kaha u tla le hloka mehatong e latelang.
  3. Hlophisa
    Tsamaea ho buka ea hau ea 'hello_world' ho tloha Mohato oa 3.4.1. Qala Morero, beha chip ea ESP32-C6 joalo ka sepheo 'me u tsamaise sesebelisoa sa tlhophiso ea projeke 'menuconfig'.ESPC6WROOM1-N16-Module-Espressif-System-FIG-26
    Ho beha sepheo ka 'idf.py set-target ESP32-C6' ho lokela ho etsoa hang, ka mor'a ho bula morero o mocha. Haeba projeke e na le meaho le litlhophiso tse seng li ntse li le teng, li tla hlakoloa le ho qalisoa. Sepheo se ka bolokoa ka ho feto-fetoha ha tikoloho ho tlola mohato ona ho hang. Bona Ho khetha Sepheo bakeng sa lintlha tse ling.
    Haeba mehato e fetileng e entsoe ka nepo, menu e latelang e tla hlaha:ESPC6WROOM1-N16-Module-Espressif-System-FIG- (7)
    U sebelisa menu ena ho theha mefuta e fapaneng ea morero, mohlala, lebitso la marang-rang a Wi-Fi le password, the
    lebelo la processor, joalo-joalo. Ho theha projeke ka menuconfig ho ka qojoa bakeng sa "hello_word". Example tla
    matha ka tlhophiso ea kamehla
    Mebala ea menu e ka fapana ho terminal ea hau. O ka fetola ponahalo ka khetho ea '–style'. Ka kopo, tsamaisa 'idf.py menuconfig -help'–bakeng sa lintlha tse ling.
  4. Haha Morero
    Theha morero ka ho tsamaisa:ESPC6WROOM1-N16-Module-Espressif-System-FIG-12
    Taelo ena e tla bokella kopo le likarolo tsohle tsa ESP-IDF, ebe e tla hlahisa bootloader, tafole ea karohano, le li-binaries tsa kopo.ESPC6WROOM1-N16-Module-Espressif-System-FIG-13ESPC6WROOM1-N16-Module-Espressif-System-FIG-14
    Haeba ho se na liphoso, mohaho o tla qetella ka ho hlahisa firmware binary .bin file.
  5. Hlahisa ho Sesebediswa
    Benya li-binaries tseo u sa tsoa li haha ​​​​mojuleng oa hau ka ho matha:ESPC6WROOM1-N16-Module-Espressif-System-FIG-15
    Fetolela PORT ka lebitso la seriale la boto ea ESP32-C6 ho tloha Mohato: Hokela Sesebelisoa sa Hau.
    U ka boela ua fetola sekhahla sa baud ea flasher ka ho nkela BAUD sebaka ka sekhahla seo u se hlokang. Sekhahla sa kamehla sa baud ke 460800.
    Bakeng sa tlhaiso-leseling e batsi ka likhang tsa idf.py, bona idf.py.
    Hlokomela:
    Khetho ea 'flash' e iketsetsa le ho khantša morero, kahoo ho sebetsa 'idf.py build' ha ho hlokahale.
    Ha o benya, o tla bona lethathamo la lihlahisoa tse tšoanang le tse latelang:ESPC6WROOM1-N16-Module-Espressif-System-FIG-16 ESPC6WROOM1-N16-Module-Espressif-System-FIG-17ESPC6WROOM1-N16-Module-Espressif-System-FIG-18
    Haeba ho se na mathata qetellong ea ts'ebetso ea flash, boto e tla qala hape ebe e qala ts'ebeliso ea "hello_world".
  6. Hlokomela
    Ho bona hore na "hello_world" e ntse e sebetsa, thaepa 'idf.py -p PORT monitor' (Se ke oa lebala ho nkela PORT sebaka ka lebitso la hau la serial port).
    Taelo ena e qala ts'ebeliso ea IDF Monitor:ESPC6WROOM1-N16-Module-Espressif-System-FIG-19ESPC6WROOM1-N16-Module-Espressif-System-FIG-20Kamora ho qala le lits'oants'o tsa tlhahlobo, o lokela ho bona "Hello world!" e hatisitsoeng ke kopo.ESPC6WROOM1-N16-Module-Espressif-System-FIG-21

Ho tsoa ho leihlo la IDF sebelisa sekhechana sa Ctrl+].
Ke sona feela seo u se hlokang ho qala ka module ea ESP32-C6-WROOM-1! Joale u se u loketse ho leka tse ling examples ho ESP-IDF, kapa e ea ka ho le letona ho iketsetsa lits'ebetso tsa hau.

Polelo ea US FCC

Sesebelisoa se lumellana le Buka ea KDB 996369 D03 OEM v01. Ka tlase ke litaelo tsa kopanyo bakeng sa baetsi ba lihlahisoa tse amohelang ho latela KDB 996369 D03 OEM Manual v01.

Lethathamo la Melao e sebetsang ea FCC
FCC Karolo ea 15 Karoloana ea C 15.247

Maemo a khethehileng a Tšebeliso ea Ts'ebetso
Mojule ona o na le mesebetsi ea WiFi le BLE.

  • Maqhubu a Ts'ebetso:
    • WiFi: 2412 ~ 2462 MHz
    • Bluetooth: 2402 ~ 2480 MHz
    • Zigbee/Tlhalo:2405 ~ 2480 MHz
  • Nomoro ea Channel:
    • WiFi: 11
    • Bluetooth: 40
    • Zigbee/Tlhalo: 26
  • Ho feto-fetoha ha molumo:
    • WiFi: DSSS; OFDM
    • Bluetooth: GFSK
    • Zigbee/Tlhaloso:O-QPSK
  • Mofuta: Antenna ea PCB e ka har'a board
    • Phaello: 3.26 dBi Max

Mojule o ka sebelisoa bakeng sa lits'ebetso tsa IoT ka antenna e phahameng ea 3.26 dBi. Moetsi oa moamoheli ea kenyang mojule ona sehlahisoa sa bona o tlameha ho etsa bonnete ba hore sehlahisoa sa ho qetela sa motsoako se lumellana le litlhoko tsa FCC ka tlhahlobo ea tekheniki kapa tlhahlobo ea melao ea FCC, ho kenyeletsoa le ts'ebetso ea transmitter. Moetsi oa moamoheli o tlameha ho hlokomela hore a se ke a fana ka tlhahisoleseling ho mosebelisi oa ho qetela mabapi le mokhoa oa ho kenya kapa ho tlosa mojule ona oa RF bukeng ea mosebelisi ea sehlahisoa se kopanyang mojulu ona. Bukana ea ho qetela ea mosebedisi e tla kenyelletsa tlhahisoleseding / temoso eohle e hlokahalang ea tsamaiso joalokaha ho bontšitsoe bukeng ena.

Mekhoa e Lekanyelitsoeng ea Module
Ha e sebetse. Mojule ke mojule o le mong mme o lumellana le tlhoko ea FCC Karolo ea 15.212.

Latela Meetso ea Antenna
Ha e sebetse. Module e na le antenna ea eona, 'me ha e hloke antenna e hatisitsoeng ea boto ea microstrip trace, joalo-joalo.

Mehopolo ea RF Exposure
Mojule o tlameha ho kenngoa ka har'a thepa ea moamoheli hoo bonyane 20cm e bolokoang lipakeng tsa lenakana le 'mele oa basebelisi; mme haeba setatemente sa kgahlamelo ya RF kapa sebopeho sa mojule se ka fetolwa, mohlahisi wa sehlahiswa se amohelang o lokela ho jara boikarabelo ba mojule ka ho fetola ID ya FCC kapa tshebediso e ntjha. ID ea FCC ea module e ke ke ea sebelisoa sehlahisoa sa ho qetela. Maemong ana, moetsi oa moamoheli o tla ikarabella bakeng sa ho lekola bocha sehlahisoa (ho kenyeletsoa le transmitter) le ho fumana tumello e arohaneng le FCC.

Liantenna

Tlhaloso ea li-antenna ke tse latelang:

  • Mofuta: PCB Antenna
  • Phaello: 3.26 dBi

Sesebelisoa sena se etselitsoe feela bahlahisi ba amohelang baeti tlas'a maemo a latelang:

  • Mojule oa transmitter o kanna oa se be teng hammoho le transmitter kapa antenna efe kapa efe.
  • Mojule o tla sebelisoa feela le (li)nakana tse ka ntle tse kileng tsa lekoa le ho netefatsoa ka mojule ona.
  • Lenaka le tlameha ho hokelloa ruri kapa le sebelise "e ikhethang" e kopanyang manakana.

Ha feela maemo a kaholimo a fihletsoe, tlhahlobo e ngoe ea transmitter e ke ke ea hlokahala. Leha ho le joalo, moetsi oa moamoheli o ntse a ikarabella bakeng sa ho lekola sehlahisoa sa bona sa ho qetela bakeng sa litlhoko life kapa life tse ling tse hlokahalang bakeng sa mojule ona o kentsoeng (bakeng sa ex.ample, tlhahiso ea lisebelisoa tsa dijithale, litlhoko tsa peripheral tsa PC, joalo-joalo).

Leibole le Boitsebiso ba Boikamahanyo
Baetsi ba lihlahisoa tse amohelang batho ba hloka ho fana ka lengolo la 'mele kapa la e-mail le reng "E na le ID ea FCC: 2AC7Z-ESPC6WROOM1" le sehlahisoa sa bona se felileng.

Lintlha tse mabapi le mekhoa ea tlhahlobo le litlhoko tse ling tsa tlhahlobo

  • Maqhubu a Ts'ebetso:
    • WiFi: 2412 ~ 2462 MHz
    • Bluetooth: 2402 ~ 2480 MHz
    • Zigbee / Khoele: 2405 ~ 2480 MHz
  • Nomoro ea Channel:
    • WiFi: 11
    • Bluetooth: 40
    • Zigbee/Tlhalo:26
  • Ho feto-fetoha ha molumo:
    • WiFi: DSSS; OFDM
    • Bluetooth: GFSK
    • Zigbee/Tlhaloso:O-QPSK

Moetsi oa moamoheli o tlameha ho etsa tlhahlobo ea tlhahiso e hlabositsoeng le e entsoeng le e sa nepahalang, joalo-joalo, ho latela mekhoa ea 'nete ea tlhahlobo bakeng sa transmitter e ikemetseng ea moamoheli, hammoho le li-module tse fetisang ka nako e le ngoe kapa li-transmitter tse ling sehlahisoa se amohelang. Ke feela ha liphetho tsohle tsa liteko tsa mekhoa ea liteko li lumellana le litlhoko tsa FCC, joale sehlahisoa sa ho qetela se ka rekisoa ka molao.

Teko ea tlatsetso, Karolo ea 15 Karolo ea B e lumellana
Modular transmitter ke FCC feela e dumelletsweng ke FCC Karolo ya 15 Subpart C 15.247 le hore moetsi wa sehlahiswa se amohelang o na le boikarabelo ba ho latela melao efe kapa efe e meng ya FCC e sebetsang ho moamohedi e sa kenngweng ke setifikeiti sa modular transmitter. Haeba mofani a bapatsa sehlahisoa sa bona e le se lumellanang le Karolo ea 15 ea Karolo ea B (ha e boetse e na le potoloho ea dijithale e sa reroang), moamoheli o tla fana ka tsebiso e bolelang hore sehlahisoa sa ho qetela sa moamoheli se ntse se hloka tlhahlobo ea melaoana ea Karolo ea 15 le Modular transmitter. hlongoa.

Thepa ena e lekiloe 'me e fumanoe e lumellana le meeli ea sesebelisoa sa digital sa Sehlopha sa B, ho latela Karolo ea 15 ea Melao ea FCC. Meeli ena e etselitsoe ho fana ka tšireletso e utloahalang khahlanong le tšitiso e kotsi mohahong oa bolulo. Thepa ena e hlahisa, e sebelisa le ho khantša matla a maqhubu a seea-le-moea, 'me haeba e sa kengoa le ho sebelisoa ho latela litaelo, e ka baka tšitiso e kotsi likhokahanong tsa radio.

Leha ho le joalo, ha ho na tiiso ea hore tšitiso e ke ke ea etsahala setsing se itseng. Haeba sesebelisoa sena se baka tšitiso e kotsi ho kamohelo ea seea-le-moea kapa ea thelevishene, e ka khethoang ka ho tima le ho tima sesebelisoa, mosebelisi o khothalletsoa ho leka ho lokisa tšitiso ka e 'ngoe ea mehato e latelang:

  • Sheba hape kapa o suthise lenakana le amohelang sebakeng se seng.
  • Eketsa karohano pakeng tsa thepa le moamoheli.
  • Hokela lisebelisoa sebakeng sa seketsoana se fapaneng le seo moamoheli a hokahaneng le sona.
  • Ikopanye le morekisi kapa setsebi sa radio/TV se nang le boiphihlelo bakeng sa thuso.

Sesebelisoa sena se lumellana le Karolo ea 15 ea Melao ea FCC. Ts'ebetso e ipapisitse le maemo a mabeli a latelang:

  • Sesebelisoa sena se ka 'na sa se ke sa baka tšitiso e kotsi.
  • Sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe e amohetsoeng, ho kenyeletsoa tšitiso e ka bakang ts'ebetso e sa batleheng.

Tlhokomeliso:
Liphetoho leha e le life kapa liphetoho tse sa amoheloang ka ho hlaka ke mokha o ikarabellang bakeng sa ho lumellana le melaoana li ka senya matla a mosebedisi a ho sebelisa thepa.

Sesebelisoa sena se lumellana le meeli ea ho pepeseha ha mahlaseli a FCC RF e behiloeng bakeng sa tikoloho e sa laoleheng. Sesebelisoa sena le lenakana la lona ha lia lokela ho behoa sebakeng se le seng kapa ho sebetsa mmoho le lenakana lefe kapa lefe kapa transmitter. Li-antenna tse sebelisoang bakeng sa transmitter ena li tlameha ho kenngoa ho fana ka sebaka sa karohano sa bonyane 20 cm ho tloha ho batho bohle, 'me ha ea lokela ho behoa sebakeng se le seng kapa ho sebetsa hammoho le e 'ngoe ea antenna kapa transmitter.

Litaelo tsa ho kopanya OEM
Sesebelisoa sena se etselitsoe feela lihokahanyi tsa OEM tlasa maemo a latelang:

  • Mojule oa transmitter o kanna oa se be teng hammoho le transmitter kapa antenna efe kapa efe.
  • Mojule o tla sebelisoa feela le (li)nakana tse ka ntle tse kileng tsa lekoa le ho netefatsoa ka mojule ona.

Ha feela maemo a kaholimo a fihletsoe, tlhahlobo e ngoe ea transmitter e ke ke ea hlokahala. Leha ho le joalo, mohokahanyi oa OEM o ntse a ikarabella bakeng sa ho lekola sehlahisoa sa bona sa ho qetela bakeng sa litlhoko life kapa life tse ling tse hlokahalang bakeng sa mojule ona o kentsoeng (bakeng sa ex.ample, tlhahiso ea lisebelisoa tsa dijithale, litlhoko tsa peripheral tsa PC, joalo-joalo).

Boleng ba ho Sebelisa Setifikeiti sa Module
Haeba maemo ana a ke ke a finyelloa (mohlalaample litlhophiso tse itseng tsa li-laptop kapa sebaka se kopanetsoeng le mochine o mong oa motlakase), joale tumello ea FCC bakeng sa mojule ona hammoho le thepa ea moeti ha e sa nkoa e sebetsa 'me ID ea FCC ea module e ke ke ea sebelisoa sehlahisoa sa ho qetela. Maemong ana, mohokahanyi oa OEM o tla ikarabella bakeng sa ho lekola bocha sehlahisoa (ho kenyeletsoa le transmitter) le ho fumana tumello e fapaneng ea FCC.

Qetella ho Ngola Sehlahisoa
Sehlahisoa sa ho qetela se tlameha ho ngoloa sebakeng se bonahalang ka tse latelang: "E na le Transmitter Module FCC ID: 2AC7Z-ESPC6WROOM1".

Setatemente sa Canada sa indasteri

Sesebediswa sena se dumellana le di-RSS tse sa dumelleng laesense tsa Industry Canada. Ts'ebetso e ipapisitse le maemo a mabeli a latelang:

  • Sesebelisoa sena se ka 'na sa se ke sa baka tšitiso; le
  • Sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe, ho kenyeletsoa tšitiso e ka bakang ts'ebetso e sa batleheng ea sesebelisoa.

Polelo ea Tšusumetso ea Mahlaseli
Sesebelisoa sena se latela meeli ea ts'oaetso ea radiation ea IC e behetsoeng tikoloho e sa laoleheng. Sesebelisoa sena se lokela ho kengoa le ho sebetsoa ka bonyane sebaka sa 20 cm lipakeng tsa radiator le mmele oa hau.

RSS-247 Karolo 6.4 (5)
Sesebelisoa se ka khaotsa ho fetisoa haeba ho se na tlhahisoleseling ho fetisa, kapa ho hloleha ho sebetsa. Hlokomela hore sena ha se morero oa ho thibela phetiso ea taolo kapa tlhahisoleseling kapa ts'ebeliso ea likhoutu tse pheta-phetoang moo ho hlokehang ke theknoloji.

Sesebediswa sena se reretswe feela dihokahanyi tsa OEM tlasa maemo a latelang (Bakeng sa tshebediso ya sesebediswa sa module):

  • Antenna e tlameha ho kenngoa hoo 20 cm e bolokiloeng pakeng tsa antenna le basebelisi, le
  • Mojule oa transmitter o kanna oa se be teng hammoho le transmitter kapa antenna efe kapa efe.

Ha feela maemo a 2 a kaholimo a fihletsoe, tlhahlobo e ngoe ea transmitter e ke ke ea hlokahala. Leha ho le joalo, mohokahanyi oa OEM o ntse a ikarabella bakeng sa ho lekola sehlahisoa sa bona sa ho qetela bakeng sa litlhoko life kapa life tse ling tse hlokahalang ha mojule ona o kentsoe.

TLHOKOMELISO EA BOHLOKOA:
Haeba maemo ana a ke ke a finyelloa (mohlalaample litlhophiso tse itseng tsa laptop kapa colocation le transmitter e 'ngoe), joale tumello ea Canada ha e sa nkoa e le molaong mme ID ea IC e ke ke ea sebelisoa sehlahisoa sa ho qetela. Maemong ana, mohokahanyi oa OEM o tla ikarabella bakeng sa ho lekola bocha sehlahisoa (ho kenyeletsoa le transmitter) le ho fumana tumello e arohaneng ea Canada.

Qetella ho Ngola Sehlahisoa
Mojule ona oa transmitter o lumelletsoe ho sebelisoa feela sesebelisoa moo antenna e ka kengoang e le hore 20 cm e ka bolokoa lipakeng tsa lenakana le basebelisi. Sehlahisoa sa ho qetela se tlameha ho ngoloa sebakeng se bonahalang ka lintlha tse latelang: "E na le IC: 21098-ESPC6WROOM

Qetella ho Ngola Sehlahisoa
Mojule ona oa transmitter o lumelletsoe feela hore o sebelisoe sesebelisoa moo antenna e ka kengoang hoo 20 cm e ka bolokoang lipakeng tsa lenakana le basebelisi. Sehlahisoa sa ho qetela se tlameha ho ngoloa sebakeng se bonahalang ka tse latelang:

Litokomane tse Amanang le Lisebelisoa

Related Documentation

Sebaka sa Moetsi

Lihlahisoa

Iteanye le rona

Nalane ea Phetoho

Letsatsi Phetolelo Lintlha tsa ho lokolla
2023-04-21 v1.0 Tokollo ea semmuso

Phatlalatso le Tsebiso ea Copyright

Lintlha tse tokomaneng ena, ho kenyelletsa URL litšupiso, li ka fetoha ntle le tsebiso.
LITSEBISO TSOHLE TSA MOKHATLO OA BORARO TOKOMANENG ENA E FUMANE KA JOALOKAHA HO SE NA LITIISETSO TSA BOHLOKOA LE HO NEPAHA KA HAO.
HA HO TIISETSO E FUMANEHANG TOKOKOMANE ENA BAKENG SA HO REKA, HO SA TLOE TLOKO, HO LOKELA BAKENG SA MORERO OA KHETHEHILENG, HONA HA E NA TIISETSO E MANG KAPA E TSOANG HO TSOA HO TLHOKOMELISO, TLHALOSO KAPA S.AMPLE.

Boikarabello bohle, ho kenyeletsoa le melato ea ho hatakela litokelo life kapa life tsa botho, tse amanang le ts'ebeliso ea tlhaiso-leseling e tokomaneng ena, ha e na taba. Ha ho lilaesense tse hlahisoang kapa tse boletsoeng, ka estoppel kapa ka tsela e 'ngoe, ho litokelo life kapa life tsa thepa ea mahlale tse fanoeng mona.

Letšoao la Setho sa Wi-Fi Alliance ke lets'oao la khoebo la Wi-Fi Alliance. Letshwao la Bluetooth ke letshwao la kgwebo le ngodisitsweng la Bluetooth SIG.

Mabitso 'ohle a khoebo, matšoao le matšoao a ngolisitsoeng a boletsoeng tokomaneng ena ke thepa ea beng ba 'ona, 'me rea ananeloa.

Copyright © 2023 Espressif Systems (Shanghai) Co., Ltd. Litokelo tsohle li sirelelitsoe.

www.espressif.com

Fana ka Maikutlo a Litokomane

Lipotso Tse Botsoang Hangata

Q: Ke lintlha life tse ka sehloohong tsa module ea ESP32-C6-WROOM-1?
A: Mojule oa ESP32-C6-WROOM-1 o fana ka Wi-Fi, IEEE 802.15.4, le khokahanyo ea Bluetooth LE, e etsa hore e tšoanelehe bakeng sa lits'ebetso tse fapaneng joalo ka matlo a bohlale, boiketsetso ba indasteri, tlhokomelo ea bophelo bo botle le lisebelisoa tsa elektroniki tsa bareki.

P: Mojule wa ESP32-C6-WROOM-1 o na le diphini tse kae?
A: Mojule ona o na le kakaretso ea lithakhisa tse 29 bakeng sa mesebetsi e fapaneng.
Sheba tafole ea litlhaloso tsa phini bakeng sa lintlha tse felletseng mabapi le ts'ebetso ea pina ka 'ngoe.

Litokomane / Lisebelisoa

ESPRESSIF ESPC6WROOM1 N16 Module Espressif Sistimi [pdf] Bukana ea Mosebelisi
2AC7Z-ESPC6WROOM1, 2AC7ZESPC6WROOM1, espc6wroom1, ESPC6WROOM1 N16 Module Espressif System, ESPC6WROOM1, N16 Module Espressif System, Espressif System, System

Litšupiso

Tlohela maikutlo

Aterese ea hau ea lengolo-tsoibila e ke ke ea phatlalatsoa. Libaka tse hlokahalang li tšoailoe *