Cov ntsiab lus zais
1 ESPC6WROOM1 N16 Module Espressif System
2 Cov lus qhia siv khoom
3 Module Tshajview
4 Pin lus txhais
5 Pib pib
6 US FCC Nqe Lus
7 Kav hlau txais xov
8 Kev lag luam Canada nqe lus
9 Cov ntaub ntawv ntsig txog thiab cov peev txheej
10 Cov lus nug nquag
11 Cov ntaub ntawv / Cov ntaub ntawv
11.1 Cov ntaub ntawv

espressif-logo

ESPC6WROOM1 N16 Module Espressif System

ESPC6WROOM1-N16-Module-Espressif-System-PRODUCT

Specifications

  • Lub npe module: ESP32-C6-WROOM-1
  • Kev Txuas wireless: Wi-Fi, IEEE 802.15.4, Bluetooth LE
  • Processor: ESP32-C6, 32-ntsis RISC-V ib leeg-ntxhais
  • Kev xaiv Flash: 4MB, 8MB, 16MB (Quad SPI)

Cov lus qhia siv khoom

Pib pib

 Yam Koj Xav Tau

Txhawm rau pib nrog ESP32-C6-WROOM-1 module, koj yuav xav tau:

  • ESP32-C6-WROOM-1 module
  • Hardware Cheebtsam rau kev sib txuas
  • Kev txhim kho ib puag ncig teeb tsa

Kev sib txuas ntawm Hardware

Xa mus rau tus pin layout daim duab rau txuas cov khoom tsim nyog kho vajtse rau lub module.

Teeb tsa Kev Txhim Kho Ib puag ncig

  • Txhim kho qhov yuav tsum tau ua ua ntej: Nruab cov cuab yeej software tsim nyog raws li qhov yuav tsum tau ua.
  • Tau txais ESP-IDF: Tau txais ESP-IDF (Espressif IoT Development Framework) rau kev txhim kho.
  • Teeb Cov Cuab Yeej: Configure cov cuab yeej tsim kho uas yuav tsum tau ua rau programming.
  • Teeb tsa Environment Variables: Teeb tsa ib puag ncig hloov pauv rau qhov kev loj hlob ib puag ncig.

Tsim Koj Thawj Qhov Haujlwm
Ua raws li cov kauj ruam no los tsim koj thawj qhov project nrog ESP32-C6-WROOM-1 module:

  1. Pib ib qhov project: Pib ib qhov project tshiab hauv koj qhov chaw loj hlob.
  2. Txuas koj ntaus ntawv: Txuas ESP32-C6-WROOM-1 module rau koj qhov kev txhim kho.
  3. Kho: Configure qhov project nqis thiab peripheral raws li xav tau.
  4. Tsim qhov project: Tsim qhov project los tsim cov firmware.
  5. Flash mus rau lub Device: Nyem lub firmware mus rau ESP32-C6-WROOM-1 module.
  6. Saib xyuas: Saib xyuas cov zis thiab tus cwj pwm ntawm koj qhov project.

Module uas txhawb 2.4 GHz Wi-Fi 6 (802.11 ax), Bluetooth® 5 (LE), Zigbee thiab Xov
(802.15.4)
Ua ib ncig ntawm ESP32-C6 series ntawm SoCs, 32-ntsis RISC-V ib leeg-core microprocessor
Flash mus txog 16 MB
23 GPIOs, nplua nuj txheej ntawm peripherals
On-board PCB kav hlau txais xov

Module Tshajview

Nta

  • CPU thiab On-Chip Memory
    • ESP32-C6 embedded, 32-ntsis RISC-V ib leeg-ntxhais microprocessor, mus txog 160 MHz
    • ROM: 320 KB
    • HP SRAM: 512 KB
    • PEB SRAM: 16 KB
  • Wi-nkaus
    • 1T1R hauv 2.4 GHz band
    • Ua haujlwm zaus: 2412 ~ 2462 MHz
    • IEEE 802.11ax-ua raws
      • 20 MHz-tsuas yog tsis-AP hom
      • MCS0 ~ MCS 9
      • Uplink thiab downlink OFDMA, tshwj xeeb tshaj yog tsim nyog rau kev sib txuas ib txhij nyob rau hauv ib puag ncig high-density
      • Downlink MU-MIMO (ntau tus neeg siv, ntau lub tswv yim, ntau qhov tso zis) kom muaj peev xwm hauv lub network
      • Beamformee uas txhim kho cov teeb liab zoo
      • Channel zoo qhia (CQI)
      • DCM (dual carrier modulation) los txhim kho qhov txuas robustness
      • Spatial rov siv los ua kom muaj qhov sib npaug sib npaug
      • Target wake time (TWT) uas optimizes lub zog txuag mechanisms
    • Tau tshaj IEEE 802.11b/g/n raws tu qauv
      • 20 MHz thiab 40 MHz bandwidth
      • Cov ntaub ntawv tus nqi mus txog 150 Mbps
      • Wi-nkaus Multimedia (WMM)
      • TX/RX A-MPDU, TX/RX A-MSDU
      • Tam sim no thaiv ACK
      • Fragmentation thiab defragmentation
      • Transmit Opportunities (TXOP)
      • Tsis siv neeg Beacon saib xyuas (Hardware TSF)
      • 4 × virtual Wi-Fi interfaces
      • Kev txhawb nqa ib txhij rau Infrastructure BSS hauv Chaw nres tsheb hom, SoftAP hom, Chaw nres tsheb + SoftAP hom, thiab hom promiscuous
        Nco ntsoov tias thaum ESP32-C6 scans hauv Chaw nres tsheb hom, SoftAP channel yuav hloov nrog rau Chaw nres tsheb channel
      • 802.11 mc FTM
  • Bluetooth®
    • Bluetooth LE: Bluetooth 5.3 tau ntawv pov thawj
    • Bluetooth mesh
    • Hom fais fab loj
    • Ceev: 1 Mbps, 2 Mbps
    • Kev tshaj tawm extensions
    • Ntau yam kev tshaj tawm
    • Channel xaiv algorithm #2
    • LE tswj fais fab
    • Internal co-existence mechanism ntawm Wi-nkaus thiab Bluetooth qhia tib lub kav hlau txais xov
  • IEEE 802.15.4
    • Ua raws li IEEE 802.15.4-2015 raws tu qauv
    • OQPSK PHY hauv 2.4 GHz band
    • Cov ntaub ntawv tus nqi: 250 Kbps
    • Xov 1.3
    • Zigbee 3.0
  • Peripherals
    • GPIO, SPI, parallel IO interface, UART, I2C, I2S, RMT (TX/RX), pulse counter, LED PWM, USB Serial/JTAG maub los, MCPWM, SDIO2.0 qhev maub los, GDMA, TWAI® maub los, on-chip debug functionality ntawm JTAG, event task matrix, ADC, kub sensor, general-purpose timers, watchdog timers, thiab lwm yam.
      Integrated Cheebtsam ntawm Module
    • 40 MHz siv lead ua oscillator
    • SPI flash
  • Kav hlau txais xov Xaiv
    • On-board PCB kav hlau txais xov
  • Cov xwm txheej ua haujlwm
    • Kev khiav hauj lwm voltage / Fais fab mov: 3.0 ~ 3.6V
    • Kev khiav hauj lwm kub ambient:
      • 85 ° C version module: -40 ~ 85 ° C
      • 105 ° C version module: -40 ~ 105 ° C

Kev piav qhia

ESP32-C6-WROOM-1 yog lub hom phiaj dav dav Wi-Fi, IEEE 802.15.4, thiab Bluetooth LE module. Cov txheej txheem nplua nuj ntawm cov khoom siv hluav taws xob thiab kev ua haujlwm siab ua rau qhov kev xaiv zoo tshaj plaws rau cov tsev ntse, kev lag luam automation, kev kho mob, khoom siv hluav taws xob, thiab lwm yam.
ESP32-C6-WROOM-1 module nta ib sab SPI flash.

Cov ntaub ntawv xaj rau ESP32-C6-WROOM-1 yog raws li hauv qab no:

Table 1: ESP32-C6-WROOM-1 Ordering Information

Ordering Code Flash Ambient Temp.

(°C)

 Loj

(mm)
ESP32-C6-WROOM-1-N4 4 MB (Quad SPI) -40∼ 85  

 

18.0 × 25.5 × 3.1
ESP32-C6-WROOM-1-H4 -40∼ 105
ESP32-C6-WROOM-1-N8 8 MB (Quad SPI) -40∼ 85
ESP32-C6-WROOM-1-N16 16 MB (Quad SPI)

Ntawm lub hauv paus ntawm cov qauv no yog ESP32-C6, 32-ntsis RISC-V ib leeg-ntxhais processor.

ESP32-C6 integrates ib tug nplua nuj txheej ntawm peripherals nrog rau SPI, parallel IO interface, UART, I2C, I2S, RMT (TX/RX), LED PWM, USB Serial/JTAG maub los, MCPWM, SDIO2.0 qhev maub los, GDMA, TWAI® maub los, on-chip debug functionality ntawm JTAG, event task matrix, as well as up to 23 GPIOs, thiab lwm yam.

Nco tseg:
Yog xav paub ntxiv txog ESP32-C6, thov mus saib ESP32-C6 Series Datasheet.

Pin lus txhais

Tus Pin Tso Tawm
Daim duab tus pin hauv qab no qhia qhov kwv yees qhov chaw ntawm tus pins ntawm lub module.

ESPC6WROOM1-N16-Module-Espressif-System-FIG- (1)

Pin Description
Lub module muaj 29 tus pins. Saib tus pin txhais hauv Table 2 Pin Definitions.
Rau peripheral pin configurations, thov mus saib ESP32-C6 Series Datasheet.

Table 2: Pin lus txhais

Lub npe Tsis muaj. Hom1 Muaj nuj nqi
GND 1 P Hauv av
3v 3 2 P Fais fab mov
EN 3 I Siab: on, enables lub nti. Tsawg: tawm, lub chip powers tawm.

Lus Cim: Tsis txhob tso EN tus pin ntab.
IO4 4 Kuv / O / T MTMS, GPIO4, LP_GPIO4, LP_UART_RXD, ADC1_CH4, FSPIHD
IO5 5 Kuv / O / T MTDI, GPIO5, LP_GPIO5, LP_UART_TXD, ADC1_CH5, FSPIWP
IO6 6 Kuv / O / T MTCK, GPIO6, LP_GPIO6, LP_I2C_SDA, ADC1_CH6, FSPICLK
IO7 7 Kuv / O / T MTDO, GPIO7, LP_GPIO7, LP_I2C_SCL, FSPID
IO0 8 Kuv / O / T GPIO0, XTAL_32K_P, LP_GPIO0, LP_UART_DTRN, ADC1_CH0
IO1 9 Kuv / O / T GPIO1, XTAL_32K_N, LP_GPIO1, LP_UART_DSRN, ADC1_CH1
IO8 10 Kuv / O / T GPIO 8
IO10 11 Kuv / O / T GPIO 10
IO11 12 Kuv / O / T GPIO 11
IO12 13 Kuv / O / T GPIO12, USB_D-
IO13 14 Kuv / O / T GPIO13, USB_D+
IO9 15 Kuv / O / T GPIO 9
IO18 16 Kuv / O / T GPIO18, SDIO_CMD, FSPICS2
IO19 17 Kuv / O / T GPIO19, SDIO_CLK, FSPICS3
IO20 18 Kuv / O / T GPIO20, SDIO_DATA0, FSPICS4
IO21 19 Kuv / O / T GPIO21, SDIO_DATA1, FSPICS5
IO22 20 Kuv / O / T GPIO22, SDIO_DATA2
IO23 21 Kuv / O / T GPIO23, SDIO_DATA3
NC 22 — NC
IO15 23 Kuv / O / T GPIO 15
RXD 0 24 Kuv / O / T U0RXD, GPIO17, FSPICS1
TX0 25 Kuv / O / T U0TXD, GPIO16, FSPICS0
IO3 26 Kuv / O / T GPIO3, LP_GPIO3, LP_UART_CTSN, ADC1_CH3
IO2 27 Kuv / O / T GPIO2, LP_GPIO2, LP_UART_RTSN, ADC1_CH2, FSPIQ
GND 28 P Hauv av
EPAD 29 P Hauv av

1p: ib. fais fab mov; kuv: input; O: tso zis; T: siab impedance.

Pib pib

Yam Koj Xav Tau
Txhawm rau tsim cov ntawv thov rau module koj xav tau:

  • 1 x ESP32-C6-WROOM-1
  • 1 x Espressif RF xeem board
  • 1 x USB-rau-Serial board
  • 1 x Micro-USB cable
  • 1 x PC khiav Linux

Hauv phau ntawv qhia cov neeg siv no, peb coj Linux operating system ua ib qho piv txwvample. Yog xav paub ntxiv txog kev teeb tsa ntawm Windows thiab macOS, thov mus saib ESP-IDF Programming Guide.

Kev sib txuas ntawm Hardware

  1. solder lub ESP32-C6-WROOM-1 module rau RF xeem board raws li qhia nyob rau hauv daim duab 2.ESPC6WROOM1-N16-Module-Espressif-System-FIG- (2)
  2. Txuas lub RF xeem board rau USB-rau-Serial board ntawm TXD, RXD, thiab GND.
  3. Txuas USB-rau-Serial board rau PC.
  4. Txuas lub Rooj Tswjhwm Saib RF rau PC lossis lub hwj chim adapter kom pab tau 5 V fais fab mov, ntawm Micro-USB cable.
  5. Thaum rub tawm, txuas IO9 rau GND ntawm lub jumper. Tom qab ntawd, tig "ON" lub rooj sib tham.
  6. Download tau firmware rau hauv flash. Yog xav paub ntxiv, saib cov tshooj hauv qab no.
  7. Tom qab rub tawm, tshem tawm lub jumper ntawm IO9 thiab GND.
  8. Fais fab mus rau RF xeem board dua. Lub module yuav hloov mus rau hom kev ua haujlwm. Lub nti yuav nyeem cov kev pab cuam los ntawm flash thaum pib.

Nco tseg:
IO9 yog nyob rau hauv logic siab. Yog tias IO9 raug teeb tsa kom rub tawm, khau raj hom yog xaiv. Yog hais tias tus pin no rub-down los yog sab laug floating, lub
Download hom yog xaiv. Yog xav paub ntxiv txog ESP32-C6-WROOM-1, thov mus saib ESP32-C6 Series Datasheet.

Teeb tsa Kev Txhim Kho Ib puag ncig
Espressif IoT Development Framework (ESP-IDF luv luv) yog lub hauv paus rau kev tsim cov ntawv thov raws li Espressif ESP32. Cov neeg siv tuaj yeem tsim cov ntawv thov nrog ESP32-C6 hauv Windows / Linux / macOS raws li ESP-IDF. Ntawm no peb coj Linux operating system ua tus example.

  1. Nrhav Ua Ntej
    Txhawm rau suav nrog ESP-IDF koj yuav tsum tau txais cov pob hauv qab no:
    • CentOS 7 & 8:ESPC6WROOM1-N16-Module-Espressif-System-FIG- (3)
    • Ubuntu thiab Debian:ESPC6WROOM1-N16-Module-Espressif-System-FIG- (4)
    • Arch:ESPC6WROOM1-N16-Module-Espressif-System-FIG- (5)
      Nco tseg:
      • Cov lus qhia no siv cov npe ~ / esp ntawm Linux ua ib qho kev teeb tsa rau ESP-IDF.
      • Nco ntsoov tias ESP-IDF tsis txhawb qhov chaw hauv txoj kev.
  2. Tau txais ESP-IDF
    Txhawm rau tsim cov ntawv thov rau ESP32-C6-WROOM-1 module, koj xav tau cov tsev qiv ntawv software muab los ntawm Espressif hauv ESP-IDF repository.
    Txhawm rau kom tau ESP-IDF, tsim ib daim ntawv qhia kev teeb tsa (~ / esp) txhawm rau rub tawm ESP-IDF rau thiab clone lub chaw cia khoom nrog 'git clone':ESPC6WROOM1-N16-Module-Espressif-System-FIG- (6)
    ESP-IDF yuav raug rub rau hauv ~/esp/esp-idf. Tham ESP-IDF Versions rau cov ntaub ntawv hais txog qhov twg ESP-IDF version siv rau hauv ib qho xwm txheej.
  3. Teeb tsa Cov Cuab Yeej
    Ib cag ntawm ESP-IDF, koj kuj yuav tsum tau nruab cov cuab yeej siv los ntawm ESP-IDF, xws li cov khoom sib txuas, kev debugger, Python tej pob khoom, thiab lwm yam. ESP-IDF muab ib tsab ntawv hu ua 'install.sh' los pab teeb tsa cov cuab yeej hauv ib qho mus.ESPC6WROOM1-N16-Module-Espressif-System-FIG- 22
  4. Teeb tsa Environment Variables
    Cov cuab yeej ntsia tseem tsis tau ntxiv rau PATH ib puag ncig hloov pauv. Txhawm rau ua kom cov cuab yeej siv tau los ntawm kab hais kom ua, qee qhov kev hloov pauv ib puag ncig yuav tsum tau teeb tsa. ESP-IDF muab lwm tsab ntawv 'export.sh' uas ua li ntawd. Hauv lub davhlau ya nyob twg uas koj yuav siv ESP-IDF, khiav:ESPC6WROOM1-N16-Module-Espressif-System-FIG- 23

Tam sim no txhua yam yog npaj txhij, koj tuaj yeem tsim koj thawj qhov project ntawm ESP32-C6-WROOM-1 module.

Tsim Koj Thawj Qhov Haujlwm

  1. Pib Ua Haujlwm
    Tam sim no koj npaj txhij los npaj koj daim ntawv thov rau ESP32-C6-WROOM-1 module. Koj tuaj yeem pib nrog get-started/hello_world qhov project los ntawm examples directory hauv ESP-IDF.
    Copy get-started/hello_world rau ~/esp directory:ESPC6WROOM1-N16-Module-Espressif-System-FIG- 24Muaj ntau yam ntawm exampua project hauv examples directory hauv ESP-IDF. Koj tuaj yeem luam ib qhov project tib yam li tau hais los saum toj no thiab khiav nws. Nws tseem ua tau los tsim examples nyob rau hauv qhov chaw, tsis tau luam lawv ua ntej.
  2. Txuas Koj Lub Tshuab
    Tam sim no txuas koj lub module rau lub computer thiab xyuas hauv qab qhov chaw nres nkoj qhov module pom. Serial ports hauv Linux pib nrog '/dev/tty' hauv lawv cov npe. Khiav cov lus txib hauv qab no ob zaug, thawj zaug nrog lub rooj tsavxwm unplugged, ces nrog ntsaws rau hauv. Qhov chaw nres nkoj uas tshwm sim zaum ob yog qhov koj xav tau:ESPC6WROOM1-N16-Module-Espressif-System-FIG- 25
    Nco tseg:
    Khaws lub npe chaw nres nkoj ua ke raws li koj xav tau hauv cov kauj ruam tom ntej.
  3. Configure
    Nkag mus rau koj 'hello_world' directory los ntawm Kauj ruam 3.4.1. Pib ib qhov project, teeb ESP32-C6 nti ua lub hom phiaj thiab khiav qhov project configuration utility 'menuconfig'.ESPC6WROOM1-N16-Module-Espressif-System-FIG- 26
    Teem lub hom phiaj nrog 'idf.py set-target ESP32-C6' yuav tsum ua ib zaug, tom qab qhib qhov project tshiab. Yog tias qhov project muaj qee qhov kev tsim thiab teeb tsa, lawv yuav raug tshem tawm thiab pib ua haujlwm. Lub hom phiaj yuav tau txais kev cawmdim hauv ib puag ncig hloov pauv kom hla cov kauj ruam no txhua. Saib Xaiv Lub Hom Phiaj yog xav paub ntxiv.
    Yog tias cov kauj ruam dhau los tau ua tiav lawm, cov ntawv qhia zaub mov nram qab no tshwm:ESPC6WROOM1-N16-Module-Espressif-System-FIG- (7)
    Koj siv cov ntawv qhia zaub mov no los teeb tsa qhov project tshwj xeeb hloov pauv, piv txwv li Wi-Fi network lub npe thiab tus password, tus
    processor ceev, thiab lwm yam. Teeb qhov project nrog menuconfig yuav raug hla rau "hello_word". Qhov no example yuav
    khiav nrog default configuration
    Cov xim ntawm cov ntawv qhia zaub mov yuav txawv ntawm koj lub davhlau ya nyob twg. Koj tuaj yeem hloov qhov tsos nrog qhov kev xaiv '–style'. Thov khiav 'idf.py menuconfig –help'–rau cov lus qhia ntxiv.
  4. Tsim qhov project
    Tsim qhov project los ntawm kev khiav:ESPC6WROOM1-N16-Module-Espressif-System-FIG- 12
    Cov lus txib no yuav suav sau daim ntawv thov thiab tag nrho ESP-IDF cov khoom, tom qab ntawd nws yuav tsim cov bootloader, faib cov lus, thiab daim ntawv thov binaries.ESPC6WROOM1-N16-Module-Espressif-System-FIG- 13ESPC6WROOM1-N16-Module-Espressif-System-FIG- 14
    Yog tias tsis muaj qhov yuam kev, qhov tsim yuav ua tiav los ntawm kev tsim cov firmware binary .bin file.
  5. Nyem rau ntawm lub ntaus ntawv
    Flash cov binaries uas koj nyuam qhuav tsim rau koj lub module los ntawm kev khiav:ESPC6WROOM1-N16-Module-Espressif-System-FIG- 15
    Hloov PORT nrog koj lub rooj tsav xwm ESP32-C6 lub npe chaw nres nkoj los ntawm Kauj Ruam: Txuas Koj Lub Tshuab.
    Koj tuaj yeem hloov qhov flasher baud tus nqi los ntawm kev hloov BAUD nrog tus nqi baud koj xav tau. Lub neej ntawd baud tus nqi yog 460800.
    Yog xav paub ntxiv txog kev sib cav idf.py, saib ib idf.py.
    Nco tseg:
    Qhov kev xaiv 'flash' cia li tsim thiab flashes qhov project, yog li khiav 'idf.py build' tsis tsim nyog.
    Thaum flashing, koj yuav pom cov ntawv tso zis zoo ib yam li hauv qab no:ESPC6WROOM1-N16-Module-Espressif-System-FIG- 16 ESPC6WROOM1-N16-Module-Espressif-System-FIG- 17ESPC6WROOM1-N16-Module-Espressif-System-FIG- 18
    Yog tias tsis muaj teeb meem thaum kawg ntawm cov txheej txheem flash, lub rooj tsavxwm yuav rov pib dua thiab pib ua daim ntawv thov "hello_world".
  6. Saib xyuas
    Txhawm rau xyuas seb "hello_world" puas tau khiav, ntaus 'idf.py -p PORT monitor' (Tsis txhob hnov ​​​​qab hloov PORT nrog koj lub npe chaw nres nkoj serial).
    Qhov kev hais kom ua no qhib daim ntawv thov IDF Monitor:ESPC6WROOM1-N16-Module-Espressif-System-FIG- 19ESPC6WROOM1-N16-Module-Espressif-System-FIG- 20Tom qab pib ua haujlwm thiab kuaj xyuas cov ntawv teev tseg, koj yuav tsum pom "Nyob zoo ntiaj teb!" luam tawm los ntawm daim ntawv thov.ESPC6WROOM1-N16-Module-Espressif-System-FIG- 21

Txhawm rau tawm ntawm IDF saib siv lub shortcut Ctrl +].
Qhov ntawd yog txhua yam koj xav tau los pib nrog ESP32-C6-WROOM-1 module! Tam sim no koj npaj txhij mus sim lwm yam examples hauv ESP-IDF, lossis mus rau txoj cai los tsim koj tus kheej daim ntawv thov.

US FCC Nqe Lus

Cov cuab yeej ua raws li KDB 996369 D03 OEM Phau Ntawv v01. Hauv qab no yog cov lus qhia kev koom ua ke rau cov tuam txhab tsim khoom lag luam raws li KDB 996369 D03 OEM Phau Ntawv v01.

Daim ntawv teev cov kev cai FCC siv tau
FCC Part 15 Subpart C 15.247

Tej yam kev ua haujlwm tshwj xeeb
Lub module muaj WiFi thiab BLE ua haujlwm.

  • Ua haujlwm zaus:
    • WiFi: 2412 ~ 2462 MHz
    • Bluetooth: 2402 ~ 2480 MHz
    • Zigbee / Xov: 2405 ~ 2480 MHz
  • Tus naj npawb ntawm Channel:
    • WiFi: 11
    • Bluetooth: 40
    • Zigbee / Xov: 26
  • Modulation:
    • WiFi: DSSS; OFDM
    • Bluetooth: GFSK
    • Zigbee / Xov: O-QPSK
  • Hom: On-board PCB kav hlau txais xov
    • Txais: 3.26 dBi Max

Lub module tuaj yeem siv rau IoT daim ntawv thov nrog qhov siab tshaj plaws 3.26 dBi kav hlau txais xov. Cov chaw tsim khoom lag luam txhim kho cov qauv no rau hauv lawv cov khoom yuav tsum xyuas kom meej tias cov khoom sib xyaw zaum kawg ua tau raws li FCC cov cai los ntawm kev ntsuam xyuas kev lag luam lossis kev ntsuam xyuas rau FCC cov cai, suav nrog kev ua haujlwm ntawm lub tshuab xa tawm. Tus tswv tsev tsim khoom yuav tsum paub tsis txhob muab cov ntaub ntawv rau tus neeg siv kawg hais txog yuav ua li cas rau nruab lossis tshem tawm RF module hauv tus neeg siv phau ntawv ntawm cov khoom kawg uas ua ke nrog cov qauv no. Cov neeg siv kawg phau ntawv yuav tsum suav tag nrho cov ntaub ntawv tswj hwm / ceeb toom raws li qhia hauv phau ntawv no.

Cov txheej txheem Module txwv
Tsis siv tau. Lub module yog ib qho module thiab ua raws li qhov yuav tsum tau muaj ntawm FCC Tshooj 15.212.

Trace Antenna Designs
Tsis siv tau. Lub module muaj nws tus kheej kav hlau txais xov, thiab tsis xav tau tus tswv tsev luam ntawv board microstrip kab kav hlau txais xov, thiab lwm yam.

RF Exposure Considerations
Lub module yuav tsum tau nruab rau hauv cov khoom siv tswv tsev xws li qhov tsawg kawg yog 20cm yog tswj ntawm tus kav hlau txais xov thiab cov neeg siv lub cev; thiab yog hais tias RF exposure nqe lus los yog module layout raug hloov, ces tus tswv tsev tsim khoom yuav tsum tau coj lub luag hauj lwm ntawm lub module los ntawm kev hloov nyob rau hauv FCC ID los yog daim ntawv thov tshiab. FCC ID ntawm lub module tsis tuaj yeem siv rau ntawm cov khoom kawg. Nyob rau hauv cov xwm txheej no, tus tswv tsev tsim khoom yuav yog lub luag haujlwm rau rov ntsuam xyuas cov khoom kawg (nrog rau lub transmitter) thiab tau txais kev tso cai FCC cais.

Kav hlau txais xov

Antenna specification yog raws li nram no:

  • Hom: PCB kav hlau txais xov
  • nce: 3.26dBi

Cov cuab yeej no tsuas yog npaj rau cov tuam txhab tsim khoom raws li hauv qab no:

  • Lub transmitter module yuav tsis koom nrog lwm lub transmitter lossis kav hlau txais xov.
  • Lub module yuav tsum tsuas yog siv nrog tus kav hlau txais xov sab nraud uas tau raug kuaj thawj zaug thiab tau lees paub nrog cov qauv no.
  • Lub kav hlau txais xov yuav tsum tau txuas mus tas li los yog ntiav ib tus kav hlau txais xov tshwj xeeb.

Ntev npaum li cov xwm txheej saum toj no tau ua tiav, tsis tas yuav muaj kev sim ntsuas hluav taws xob ntxiv. Txawm li cas los xij, tus tswv tsev tsim khoom tseem yog lub luag haujlwm rau kev sim lawv cov khoom kawg rau ib qho kev ua raws cai ntxiv uas yuav tsum tau ua nrog rau qhov kev teeb tsa no (rau example, digital device emissions, PC peripheral requirements, thiab lwm yam).

Daim ntawv lo thiab kev ua raws cai
Cov tuam txhab tsim khoom lag luam yuav tsum muab lub cev lossis e-label hais tias "muaj FCC ID: 2AC7Z-ESPC6WROOM1" nrog lawv cov khoom tiav.

Cov ntaub ntawv hais txog cov qauv kev xeem thiab cov kev xav tau ntawm kev xeem ntxiv

  • Ua haujlwm zaus:
    • WiFi: 2412 ~ 2462 MHz
    • Bluetooth: 2402 ~ 2480 MHz
    • Zigbee / Xov: 2405 ~ 2480 MHz
  • Tus naj npawb ntawm Channel:
    • WiFi: 11
    • Bluetooth: 40
    • Zigbee / Xov: 26
  • Modulation:
    • WiFi: DSSS; OFDM
    • Bluetooth: GFSK
    • Zigbee / Xov: O-QPSK

Cov chaw tsim khoom lag luam yuav tsum ua qhov ntsuas hluav taws xob thiab ua emission thiab spurious emission, thiab lwm yam, raws li cov qauv kev sim tiag tiag rau cov khoom siv hluav taws xob nyob ib leeg hauv ib tus tswv tsev, nrog rau ntau lub sijhawm xa cov modules lossis lwm cov khoom xa tawm hauv cov khoom lag luam. Tsuas yog thaum tag nrho cov txiaj ntsig ntawm cov qauv ntsuas ua tau raws li FCC cov cai, tom qab ntawd cov khoom kawg tuaj yeem muag tau raug cai.

Kev sim ntxiv, Tshooj 15 Subpart B raws
Lub modular transmitter tsuas yog FCC tso cai rau FCC Part 15 Subpart C 15.247 thiab hais tias tus tswv tsev cov khoom lag luam yog lub luag haujlwm rau kev ua raws li lwm yam FCC cov cai uas siv rau tus tswv tsev tsis tau them los ntawm cov khoom lag luam hloov pauv ntawm daim ntawv pov thawj. Yog tias tus neeg tau txais txiaj ntsig ua lag luam lawv cov khoom lag luam raws li Tshooj 15 Subpart B ua raws (thaum nws tseem muaj qhov tsis xav tau-radiator digital circuity), tom qab ntawd tus neeg txais txiaj ntsig yuav tsum muab ib daim ntawv ceeb toom hais tias cov khoom lag luam zaum kawg tseem xav tau Tshooj 15 Subpart B ua raws kev sim nrog cov khoom xa tawm. ntsia.

Cov cuab yeej no tau raug sim thiab pom tias ua raws li cov kev txwv rau Class B cov cuab yeej digital, ua raws li Tshooj 15 ntawm FCC Cov Cai. Cov kev txwv no yog tsim los muab kev tiv thaiv tsim nyog tiv thaiv kev cuam tshuam tsis zoo hauv kev teeb tsa hauv tsev. Cov cuab yeej no tsim, siv thiab tuaj yeem ua kom lub zog ntawm lub xov tooj cua thiab, yog tias tsis tau nruab thiab siv raws li cov lus qhia, yuav ua rau muaj kev cuam tshuam rau kev sib txuas lus hauv xov tooj cua.

Txawm li cas los xij, tsis muaj kev lees paub tias kev cuam tshuam yuav tsis tshwm sim hauv ib qho kev teeb tsa tshwj xeeb. Yog tias cov cuab yeej no ua rau muaj kev cuam tshuam tsis zoo rau xov tooj cua lossis TV txais tos, uas tuaj yeem txiav txim siab los ntawm kev tig cov cuab yeej tawm thiab qhib, tus neeg siv tau raug txhawb kom sim kho qhov cuam tshuam los ntawm ib qho ntawm cov kev ntsuas hauv qab no:

  • Reorient los yog tshem tawm cov kav hlau txais xov.
  • Ua kom muaj kev sib cais ntawm cov khoom siv thiab lub receiver.
  • Txuas cov cuab yeej siv rau hauv qhov hluav taws xob ntawm lub voj voog sib txawv ntawm qhov uas lub receiver txuas nrog.
  • Nrog rau tus neeg muag khoom lossis tus kws tshaj lij xov tooj cua / TV rau kev pab.

Cov cuab yeej no ua raws li Tshooj 15 ntawm FCC Cov Cai. Kev ua haujlwm yog ua raws li ob yam hauv qab no:

  • Cov cuab yeej no yuav tsis ua teeb meem cuam tshuam.
  • Cov cuab yeej no yuav tsum lees txais ib qho kev cuam tshuam tau txais, suav nrog kev cuam tshuam uas yuav ua rau kev ua haujlwm tsis xav tau.

Ceev faj:
Ib qho kev hloov pauv lossis kev hloov kho uas tsis tau pom zoo los ntawm tog neeg lub luag haujlwm rau kev ua raws cai tuaj yeem ua rau tus neeg siv txoj cai ua haujlwm ntawm cov khoom siv.

Cov cuab yeej siv no ua raws li FCC RF cov kev txwv tsis pub muaj hluav taws xob tau teeb tsa rau qhov chaw tsis muaj kev tswj hwm. Cov cuab yeej no thiab nws cov kav hlau txais xov yuav tsum tsis txhob muab tso rau hauv los yog ua haujlwm ua ke nrog lwm tus kav hlau txais xov lossis cov khoom xa tawm. Cov kav hlau txais xov siv rau lub tshuab xa hluav taws xob no yuav tsum tau teeb tsa los muab kev sib cais ntawm qhov deb tsawg kawg 20 cm ntawm txhua tus neeg thiab yuav tsum tsis txhob sib koom ua ke lossis ua haujlwm ua ke nrog lwm tus kav hlau txais xov lossis cov khoom xa tawm.

Cov lus qhia kev koom ua ke OEM
Cov cuab yeej no tsuas yog npaj rau OEM integrators raws li hauv qab no:

  • Lub transmitter module yuav tsis koom nrog lwm lub transmitter lossis kav hlau txais xov.
  • Lub module yuav tsum tsuas yog siv nrog tus kav hlau txais xov sab nraud uas tau raug kuaj thawj zaug thiab tau lees paub nrog cov qauv no.

Ntev npaum li cov xwm txheej saum toj no tau ua tiav, tsis tas yuav muaj kev sim ntsuas hluav taws xob ntxiv. Txawm li cas los xij, OEM kev koom ua ke tseem yog lub luag haujlwm rau kev sim lawv cov khoom kawg rau ib qho kev ua raws cai ntxiv uas yuav tsum tau ua nrog cov qauv no tau teeb tsa (rau example, digital device emissions, PC peripheral requirements, thiab lwm yam).

Kev siv tau ntawm kev siv Module Certification
Yog tias cov xwm txheej no tsis tuaj yeem ua tau raws li (example qee qhov kev teeb tsa lub khoos phis tawj lossis qhov chaw sib koom nrog lwm lub tshuab xa tawm), tom qab ntawd FCC tso cai rau cov qauv no ua ke nrog cov khoom siv hauv tsev tsis suav tias siv tau lawm thiab FCC ID ntawm lub module tsis tuaj yeem siv rau ntawm cov khoom kawg. Nyob rau hauv cov xwm txheej no, tus OEM integrator yuav yog lub luag hauj lwm rau rov ntsuam xyuas cov khoom kawg (xws li lub transmitter) thiab tau txais ib tug cais FCC kev tso cai.

End Product Labeling
Cov khoom kawg kawg yuav tsum tau sau rau hauv thaj chaw pom nrog cov hauv qab no: "muaj Transmitter Module FCC ID: 2AC7Z-ESPC6WROOM1".

Kev lag luam Canada nqe lus

Cov cuab yeej no ua raws li Kev Lag Luam Canada daim ntawv tso cai-tsim RSSs. Kev ua haujlwm yog ua raws li ob yam hauv qab no:

  • Cov cuab yeej no yuav tsis ua rau muaj kev cuam tshuam; thiab
  • Cov cuab yeej no yuav tsum lees txais ib qho kev cuam tshuam, suav nrog kev cuam tshuam uas yuav ua rau lub tshuab ua haujlwm tsis xav tau.

Radiation Exposure Statement
Cov khoom siv no ua raws nrog IC hluav taws xob tiv thaiv kev txwv teeb tsa ua kom tsis muaj kev tswj hwm ib puag ncig. Cov khoom siv no yuav tsum muab ntsia thiab ua haujlwm nrog qhov nrug tsawg kawg 20 cm ntawm qhov hluav taws xob thiab koj lub cev.

RSS-247 Tshooj 6.4 (5)
Lub cuab yeej tuaj yeem txiav tsis txuas ntxiv yog tias tsis muaj cov ntaub ntawv xa mus, lossis kev ua haujlwm tsis ua haujlwm. Nco ntsoov tias qhov no tsis yog tsim los txwv kev sib kis ntawm kev tswj lossis kev qhia cov ntaub ntawv lossis kev siv cov lej rov ua dua qhov xav tau los ntawm thev naus laus zis.

Cov cuab yeej no tsuas yog npaj rau OEM integrators raws li hauv qab no tej yam kev mob (Rau module siv cov khoom siv):

  • Lub kav hlau txais xov yuav tsum tau nruab xws li 20 cm yog tswj ntawm tus kav hlau txais xov thiab cov neeg siv, thiab
  • Lub transmitter module yuav tsis koom nrog lwm lub transmitter lossis kav hlau txais xov.

Raws li ntev raws li 2 cov xwm txheej saum toj no tau ua tiav, kev sim ntsuas hluav taws xob ntxiv yuav tsis tas yuav tsum tau ua. Txawm li cas los xij, OEM kev koom ua ke tseem yog lub luag haujlwm rau kev sim lawv cov khoom kawg rau txhua qhov kev ua raws cai ntxiv uas yuav tsum tau ua nrog cov qauv no.

CEEB TOOM:
Yog tias cov xwm txheej no tsis tuaj yeem ua tau raws li (example tej lub laptop configurations los yog colocation nrog lwm transmitter), ces qhov kev tso cai Canada yog tsis suav hais tias siv tau thiab IC ID yuav siv tsis tau rau cov khoom kawg. Nyob rau hauv cov xwm txheej no, tus OEM integrator yuav yog lub luag hauj lwm rau rov ntsuam xyuas cov khoom kawg (xws li lub transmitter) thiab tau txais ib tug cais Canada tso cai.

End Product Labeling
Qhov no transmitter module tau tso cai tsuas yog siv rau hauv cov cuab yeej uas lub kav hlau txais xov tuaj yeem ntsia tau li 20 cm yuav raug tswj xyuas ntawm tus kav hlau txais xov thiab cov neeg siv. Cov khoom kawg kawg yuav tsum tau sau rau hauv ib cheeb tsam pom nrog cov hauv qab no: “muaj IC: 21098-ESPC6WROOM

End Product Labeling
Qhov no transmitter module tau tso cai tsuas yog siv rau hauv cov cuab yeej uas lub kav hlau txais xov tuaj yeem ntsia tau li 20 cm yuav raug tswj xyuas ntawm tus kav hlau txais xov thiab cov neeg siv. Cov khoom kawg kawg yuav tsum tau sau rau hauv ib qho chaw pom nrog cov hauv qab no:

Cov ntaub ntawv ntsig txog thiab cov peev txheej

Cov ntaub ntawv ntsig txog

Developer Zone

Cov khoom

Tiv tauj peb

Kev kho keeb kwm

Hnub tim Version Tso ntawv sau tseg
2023-04-21 Ib v1.0 ua tso tawm

Tsis lees paub thiab Daim Ntawv Ceeb Toom Copyright

Cov ntaub ntawv hauv daim ntawv no, suav nrog URL cov ntaub ntawv, yuav raug hloov pauv yam tsis tau ceeb toom.
Txhua tus neeg thib peb cov ntaub ntawv hauv cov ntaub ntawv no tau muab raws li tsis muaj kev lav phib xaub rau nws qhov tseeb thiab qhov tseeb.
TSIS TXAUS SIAB RAU COV NTAUB NTAWV NO rau nws cov khoom lag luam, tsis muaj kev cuam tshuam, kev nyab xeeb rau txhua lub hom phiaj tshwj xeeb, lossis tsis muaj kev lav phib xaub uas tshwm sim tawm ntawm txhua qhov kev tshaj tawm, SPECIFICATIONAMPLE.

Txhua qhov kev lav phib xaub, suav nrog kev lav phib xaub rau kev ua txhaum cai ntawm cov tswv cuab, hais txog kev siv cov ntaub ntawv hauv daim ntawv no tsis lees paub. Tsis muaj ntawv tso cai qhia los yog qhia, los ntawm estoppel los yog lwm yam, rau ib qho kev cai lij choj muaj cai raug tso cai ntawm no.

Lub logo Wi-Fi Alliance Tus Tswv Cuab yog lub cim lag luam ntawm Wi-Fi Alliance. Lub logo Bluetooth yog lub cim lag luam ntawm Bluetooth SIG.

Tag nrho cov npe lag luam, cov cim lag luam thiab cov cim lag luam sau npe tau hais hauv daim ntawv no yog cov cuab yeej ntawm lawv cov tswv, thiab tau lees paub ntawm no.

Copyright © 2023 Espressif Systems (Shanghai) Co., Ltd. All rights reserved.

www.espressif.com

Xa cov ntaub ntawv tawm tswv yim

Cov lus nug nquag

Q: Dab tsi yog qhov tseem ceeb ntawm ESP32-C6-WROOM-1 module?
A: ESP32-C6-WROOM-1 module muaj Wi-Fi, IEEE 802.15.4, thiab Bluetooth LE txuas, ua rau nws tsim nyog rau ntau yam kev siv xws li cov tsev ntse, kev lag luam automation, kev kho mob, thiab cov khoom siv hluav taws xob.

Q: Muaj pes tsawg tus pins ESP32-C6-WROOM-1 module muaj?
A: Lub module muaj tag nrho ntawm 29 tus pins rau ntau yam haujlwm.
Xa mus rau tus pin txhais cov lus kom ntxaws cov ntaub ntawv ntawm txhua tus pin txoj haujlwm.

Cov ntaub ntawv / Cov ntaub ntawv

ESPRESSIF ESPC6WROOM1 N16 Module Espressif System [ua pdf] Tus neeg siv phau ntawv
2AC7Z-ESPC6WROOM1, 2AC7ZESPC6WROOM1, espc6wroom1, ESPC6WROOM1 N16 Module Espressif System, ESPC6WROOM1, N16 Module Espressif System, Espressif System, System

Cov ntaub ntawv

Cia ib saib

Koj email chaw nyob yuav tsis raug luam tawm. Cov teb uas yuav tsum tau muaj yog cim *