CISCO M6 Common Update Patch bakeng sa Sireletsehile Network Analytics

Prerequisite: Make sure you’ve installed all other available update patches for v7.5.0 before you begin this update process.
Tokomane ena e fana ka tlhaloso ea CIMC 4.3(5.250030) Firmware M6 Common Update Patch bakeng sa Secure Network Analytics hammoho le litaelo tsa ho kenya patch.

Ntlafatso ena ea firmware e ka etsoa ho sebelisoa SWU file/mokhoa kapa ISO file/ mokhoa o hlalositsoeng ka tlase:

• •  Sehlopha sa SWU file, patch-common-SNA-FIRMWARE-20250403-v2-01.swu, e ntlafatsa firmware ea CIMC ho version 4.3 (5.250030) bakeng sa lisebelisoa tsa UCS C-Series M6 tse sebelisang Secure Network Analytics v7.5.0.
  • Ntle le moo, o ka sebelisa ISO file, patch-common-SNA-FIRMWARE-20250403-M6-REL.iso, to update the CIMC firmware to version 4.3(5.250030) for UCS C-Series M6 hardware with Secure Network Analytics v7.5.0.

E le karolo ea ts'ebetso ea ntlafatso, etsa bonnete ba hore u kenya lipache tse hlokahalang tsa rollup lisebelisoa tsa hau.

M6 Hardware

Patch ena e sebetsa ho hardware ea UCS C-Series M6 bakeng sa lisebelisoa tsa Secure Network Analytics tse bontšitsoeng tafoleng e latelang.

M6 Hardware
Motsamaisi 2300	Sensor ea Phallo 1300
Node ea data 6300	Sensor ea Phallo 3300
Phallo Collector 4300	Sensor ea Phallo 4300

Etsa bonnete ba hore u nchafatsa lisebelisoa tsohle tsa 'mele.

Tlhahisoleseling e 'Ngoe
Bakeng sa lintlha tse ling mabapi le mofuta oa CIMC 4.3(5.250030), sheba Lintlha tsa Phatlalatso bakeng sa Cisco UCS Rack Server Software.

Khoasolla le ho Kenya

U ka khoasolla le ho kenya CIMC 4.3(5.250030) Firmware M6 Common Update Patch ka e 'ngoe ea litsela tse latelang:

• • Ho jarolla le ho kenya ka SWU
  • Khoasolla le ho e kenya ka ISO

Ho jarolla le ho kenya ka SWU

Khoasolla
Ho jarolla patch e tloaelehileng ea ntlafatso file, tlatsa mehato e latelang:

1. 1. Kena ho Cisco Software Central, https://software.cisco.com .
   2. Sebakeng sa Khoasolla le ho Ntlafatsa, khetha Fumana tse jarollotsoeng.
   3. Tlanya Secure Network Analytics lebokoseng la ho batla la Sehlahisoa.
   4.  Khetha mofuta oa sesebelisoa lethathamong le theoha, ebe o tobetsa Enter.
   5.  Under Select a Software Type, choose Secure Network Analytics Patches, then choose Firmware > Firmware in the All Release area to locate the patch.
   6. Kopitsa le ho boloka faele ea file, patch-common-SNA-FIRMWARE-20250403-v2- 01. swu.

Ho kenya
Ho kenya ntlafatso e tloaelehileng ea patch file, tlatsa mehato e latelang:

1. 1. Kena ho Motsamaisi.
   2. On the Network Analytics page, choose Configure > Global > Central Management.
   3. Tobetsa Update Manager.
   4. On the Update Manager page, click Upload, and then open the saved file, patch-common-SNA-FIRMWARE-20250403-v2-01.swu.
   5. Tobetsa menu ea Actions bakeng sa sesebelisoa, ebe o tobetsa Install Update.
      The patch stops the Vertica Database, then restarts the appliance.
   6.  Make sure you restart Vertica on any Data Node after the update patch file e kenya ka katleho ho Li-Node tsohle tsa Data.
      • Kena ho Motsamaisi.
      • Go to Central Management > Data Store > Database Control.
      • Under the Database Control tab, click the (Ellipsis) icon in the Actions column for the database.
      • Khetha Qala.
      • Confirm the database status is shown as Connected. The installation process can take up to 90 minutes; the appliance restarts automatically.

Khoasolla le ho e kenya ka ISO

Khoasolla
Ho jarolla patch ea ntlafatso file, tlatsa mehato e latelang:

1. 1. Kena ho Cisco Software Central, https://software.cisco.com .
   2. Sebakeng sa Khoasolla le ho Ntlafatsa, khetha Fumana tse jarollotsoeng.
   3. Tlanya Secure Network Analytics lebokoseng la ho batla la Sehlahisoa.
   4. Khetha mofuta oa sesebelisoa lethathamong le theoha, ebe o tobetsa Enter.
   5. From the left menu, choose All Release > 4.3 > 4.3(5.250030).
   6. Kopitsa le ho boloka faele ea file, patch-common-SNA-FIRMWARE-20250403-M6-REL.iso.
   7. There are two ways of installing ISO:
      •  Ho kenya Ho sebelisa vKVM-Mapped vDVD
      • Ho kenya ho Sebelisa CIMC-Mapped vDVD

Pele ho Tlhophiso
If you have firewall rules enabled for Cisco Integrated Management Controller (CIMC), specify 169.254.254.2 in the list of allowed hosts to ensure the update is successful. Otherwise you can skip this step and go to Installation Using vKVM-Mapped vDVD or Installation Using CIMC-Mapped vDVD, depending on your preferred installation method.

1. 1. Log in to the unit’s Cisco Integrated Management Controller (CIMC) interface using a web sebatli.
   2.  Choose Networking > Network Security.
   3. In the IP Filtering (Allow Listing) menu, enter 169.254.254.2 IP value in the IP filter field.
   4.  Tobetsa Boloka Liphetoho.

Ho kenya Ho sebelisa vKVM-Mapped vDVD
Mokhoa ona oa ho kenya o nchafatsa firmware ka ho fihlella ntlafatso ea firmware ea ISO file bolokoa mochining o sebelisoang ho hokela CIMC UI.
Ho kenya patch ea firmware ho tsoa setšoantšong sa ISO, sebelisa khomphutha ea vKVM ea mochini oa M6.

1. 1. Log in to the unit’s Cisco Integrated Management Controller (CIMC) interface using a web sebatli.
   2. Select Launch KVM on the toolbar, if prompted, select HTML based KVM.
   3. The Virtual Console opens in a new browser tab.
   4. From the vKVM console, select Virtual Media to check for existing mappings. If any mappings exist (either vKVM-Mapped or CIMC-Mapped), eject them.
      Bona example ka tlase bakeng sa 'mapa oa khale o ka ntšoang.Setšoantšo se latelang se bontša skrine ha ho se na limmapa tse lokiselitsoeng.
   5. From the vKVM console, select Virtual Media > vKVM-Mapped vDVD from the menu on the left side of the window to open the Map Virtual Media – CD/DVD dialog.
   6. In the Map Virtual Media – CD/DVD dialog box, browse to the locally stored SNA M6 appliance firmware ISO file, e khethe, 'me u tobetse 'Mapa Drive ho etsa 'mapa oa ISO oa lehae ho drive ea sebele ea sesebelisoa sa SNA M6.
   7. From the vKVM console, click Virtual Media from the menu on the left side of the window to verify that the ISO is mapped.
   8. Select Macros > Static Macros > CTRL-ALT-DEL to initiate the reboot process.
   9. Press the F6 key on your keyboard when the Cisco logo and boot messages appear in the vKVM console.
   10. When the Please select boot device: dialog box appears, select Cisco vKVM-Mapped vDVD2.00. Tsoelo-pele ea firmware e qala. CIMC e ka qala bocha nakong ea ts'ebetso ea ntlafatso, e baka tahlehelo ea nakoana ea khokahano. Haeba sena se etsahala, kena ho CIMC hape 'me u thakhole bocha vKVM Console ho tsoela pele ho beha leihlo ntlafatso. Hang ha ntlafatso ea firmware e phethiloe, ISO e tla ntšoa kapa e theoloe, 'me sesebelisoa sa SNA se tla qala hape.
   11. Verify on the CIMC Chassis Summary page that the firmware has been updated.

Ho kenya ho Sebelisa CIMC-Mapped vDVD

Mokhoa ona oa ho kenya o nchafatsa firmware ka ho fihlella ntlafatso ea firmware ea ISO file e bolokiloe ho seva sa HTTP/S se fumanehang ho tsoa ho CIMC.
Ho kenya patch ea firmware ho tsoa setšoantšong sa ISO, sebelisa khomphutha ea vKVM mochining oa M6.

1. 1. Log in to the unit’s Cisco Integrated Management Controller (CIMC) interface using a web sebatli.
   2. Select Launch KVM on the toolbar, if prompted, select HTML based KVM.Taba e ncha ea sebatli e buloa bakeng sa khomphutha ea KVM, e bonts'ang lethathamo la lintho tsa menyu ka lehlakoreng le letšehali la fensetere.
   3. From the vKVM console, select Virtual Media to check for existing mappings. If any mappings exist (either vKVM-Mapped or CIMC-Mapped), eject them.
      Bona example ka tlase bakeng sa 'mapa oa khale o ka ntšoang.Setšoantšo se latelang se bontša skrine ha ho se na limmapa tse lokiselitsoeng.
   4. From the vKVM console, select Virtual Media > CIMC-Mapped vDVD from the menu on the left side of the window to open the Map Virtual Media -CD/DVD dialog.
   5. In the Map Virtual Media – CD/DVD dialog box, complete the following steps:
      • In the Name field, enter a descriptive name (for example, Firmware_ 2025).
      • Ho File Sebaka sa sebaka, kenya tsela e eang ho ISO file.
      • If required, enter the Username and Password.
      • Tobetsa 'Mapa Drive.
   6. From the vKVM console, click Virtual Media to verify that the mapping is in effect.
   7. From the vKVM console, select Macros > Static Macros > Ctrl-Alt-Del to initiate the reboot process.
   8. Press the F6 key on your keyboard when the Cisco logo and boot messages appear in the vKVM console.
   9. When the Please select boot device: dialog box appears, select Cisco CIMC-Mapped vDVD2.00.The firmware update initiates. The CIMC may reboot during the update process, after which the firmware update will continue. A CIMC reboot will cause a temporary loss of connection. Log in to the CIMC again and re-launch the vKVM Console to monitor the update progress.
      After the firmware update is complete, the ISO will not be automatically unmapped. Be sure to manually unmap the ISO before performing another reboot.
   10.  In the vKVM console, after you see the message All files kopitsoe le ho netefatsoa, ​​​​ISO e kentsoe 'me ntlafatso ea firmware ea qala. Mothating ona, ho bolokehile ho ntša kapa ho theola 'mapa oa firmware ea pele ea ISO.
   11. From the vKVM console, select Virtual Media and click the name of the previously configured mapping to eject or unmap it.
   12. Click Confirm to unmap the ISO file. Ntlafatso ea firmware e ntse e tsoela pele, 'me ho qala bocha ho latelang ho tla qala sesebelisoa sa SNA M6.
   13. On the CIMC Chassis Summary page, verify that the firmware has been updated to the expected version.

Ho ikopanya le Tšehetso

Haeba o hloka tšehetso ea tekheniki, ka kopo etsa e 'ngoe ea tse latelang:

• • Ikopanye le Cisco Partner ea hau ea lehae
  •  Ikopanye le Cisco Support
    •  Ho bula nyeoe ka web: http://www.cisco.com/c/en/us/support/index.html
    • Ho bula nyeoe ka lengolo-tsoibila: tac@cisco.com
    • Bakeng sa tšehetso ea mohala: 1-800-553-2447 (US)
    • Bakeng sa linomoro tsa tšehetso lefatšeng ka bophara: www.cisco.com/en/US/partner/support/tsd_cisco_worldwide_contacts.html

Litaba tsa Copyright
Cisco le logo ea Cisco ke matšoao a khoebo kapa matšoao a ngolisitsoeng a Cisco le/kapa mafapha a eona a US le linaheng tse ling. Ho view lethathamo la matšoao a khoebo a Cisco, e ea ho sena URL: https://www.cisco.com/go/trademarks . Matshwao a kgwebo a motho wa boraro a boletsweng ke thepa ya beng ba ona. Tšebeliso ea lentsoe molekane ha e bolele kamano ea tšebelisano pakeng tsa Cisco le k'hamphani efe kapa efe. (1721R)
© 2025 Cisco Systems, Inc. le/kapa mekhatlo e amanang le eona. Litokelo tsohle li sirelelitsoe.

LBH

Morero oa tokomane ee ke ofe?

This document provides instructions for updating the CIMC firmware to version 4.3(5.250030) for UCS C-Series M6 hardware running Secure Network Analytics v7.5.0.

What are the prerequisites for this update?

Ensure all other available update patches for v7.5.0 are installed before beginning this update process.

What hardware does this patch apply to?

This patch applies to UCS C-Series M6 hardware, including Manager 2300, Data Node 6300, Flow Collector 4300, and Flow Sensors 1300, 3300, and 4300.

How can I download and install the update?

The update can be downloaded and installed via SWU or ISO. Detailed steps for both methods are provided in the document.

Ke lokela ho etsa eng haeba ke kopana le mathata nakong ea ntlafatso?

Contact Cisco Support or your local Cisco Partner for assistance. Contact details are provided in the document.

Litokomane / Lisebelisoa

CISCO M6 Common Update Patch bakeng sa Sireletsehile Network Analytics [pdf] Bukana ea Mosebelisi Mookameli oa 2300, Node ea Boitsebiso 6300, Phallo Collector 4300, Flow Sensor 1300, Flow Sensor 3300, Flow Sensor 4300, M6 Common Update Patch bakeng sa Secure Network Analytics, Update Patch for Sireletsehile Network Analytics, Network Analytics, Network Analytics,

Litšupiso

• Bukana ea Mosebelisi