CISCO M6 Common Update Patch for Secure Network Analytics

Prerequisite: Make sure you’ve installed all other available update patches for v7.5.0 before you begin this update process.
Cov ntaub ntawv no muab cov lus piav qhia ntawm CIMC 4.3(5.250030) Firmware M6 Common Update Patch for Secure Network Analytics nrog rau cov lus qhia rau kev txhim kho thaj.

Qhov kev hloov kho firmware no tuaj yeem ua tau los ntawm SWU file/ txheej txheem lossis ISO file/ txheej txheem piav qhia hauv qab no:

• •  The SWU file, patch-common-SNA-FIRMWARE-20250403-v2-01.swu, hloov kho CIMC firmware rau version 4.3(5.250030) rau UCS C-Series M6 kho vajtse khiav Secure Network Analytics v7.5.0.
  • Xwb, koj tuaj yeem siv ISO file, patch-common-SNA-FIRMWARE-20250403-M6-REL.iso, to update the CIMC firmware to version 4.3(5.250030) for UCS C-Series M6 hardware with Secure Network Analytics v7.5.0.

Ua ib feem ntawm cov txheej txheem hloov tshiab, nco ntsoov nruab qhov yuav tsum tau rub tawm thaj ua rau thaj ntawm koj cov khoom siv.

M6 Hardware

Qhov thaj no siv rau UCS C-Series M6 kho vajtse rau cov khoom siv ruaj ntseg Network Analytics qhia hauv cov lus hauv qab no.

M6 Hardware
Tus Thawj Tswj 2300	Flow Sensor 1300
Cov ntaub ntawv Node 6300	Flow Sensor 3300
Flow Collector 4300	Flow Sensor 4300

Xyuas kom koj hloov kho txhua yam khoom siv lub cev.

Cov ntaub ntawv ntxiv
For more details about CIMC version 4.3(5.250030), refer to Release Notes for Cisco UCS Rack Server Software.

Download thiab Installation

Koj tuaj yeem rub tawm thiab nruab CIMC 4.3(5.250030) Firmware M6 Common Update Patch ntawm ob qho ntawm cov hauv qab no:

• • Rub tawm thiab nruab ntawm SWU
  • Rub tawm thiab nruab ntawm ISO

Rub tawm thiab nruab ntawm SWU

Download tau
Txhawm rau rub tawm qhov hloov tshiab thaj file, ua kom tiav cov kauj ruam hauv qab no:

1. 1. Nkag mus rau Cisco Software Central, https://software.cisco.com .
   2. Hauv thaj chaw Download thiab Upgrade, xaiv Access downloads.
   3. Ntaus Secure Network Analytics nyob rau hauv Xaiv ib lub thawv tshawb nrhiav khoom.
   4.  Xaiv tus qauv khoom siv los ntawm daim ntawv teev npe, ces nias Enter.
   5.  Under Select a Software Type, choose Secure Network Analytics Patches, then choose Firmware > Firmware in the All Release area to locate the patch.
   6. Download tau thiab txuag lub file, patch-common-SNA-FIRMWARE-20250403-v2- 01. swu.

Kev teeb tsa
Txhawm rau nruab qhov kev hloov pauv hloov pauv hloov tshiab file, ua kom tiav cov kauj ruam hauv qab no:

1. 1. Nkag mus rau Tus Thawj Tswj.
   2. On the Network Analytics page, choose Configure > Global > Central Management.
   3. Nyem qhov hloov tshiab Manager.
   4. On the Update Manager page, click Upload, and then open the saved file, patch-common-SNA-FIRMWARE-20250403-v2-01.swu.
   5. Nyem rau Cov Ntawv Qhia Ua Haujlwm rau cov khoom siv, tom qab ntawd nyem Nruab Hloov Kho Tshiab.
      The patch stops the Vertica Database, then restarts the appliance.
   6.  Make sure you restart Vertica on any Data Node after the update patch file successfully installs on all Data Nodes.
      • Nkag mus rau Tus Thawj Tswj.
      • Go to Central Management > Data Store > Database Control.
      • Under the Database Control tab, click the (Ellipsis) icon in the Actions column for the database.
      • Choose Start.
      • Confirm the database status is shown as Connected. The installation process can take up to 90 minutes; the appliance restarts automatically.

Rub tawm thiab nruab ntawm ISO

Download tau
Txhawm rau rub tawm qhov hloov tshiab thaj file, ua kom tiav cov kauj ruam hauv qab no:

1. 1. Nkag mus rau Cisco Software Central, https://software.cisco.com .
   2. Hauv thaj chaw Download thiab Upgrade, xaiv Access downloads.
   3. Ntaus Secure Network Analytics nyob rau hauv Xaiv ib lub thawv tshawb nrhiav khoom.
   4. Xaiv tus qauv khoom siv los ntawm daim ntawv teev npe, ces nias Enter.
   5. From the left menu, choose All Release > 4.3 > 4.3(5.250030).
   6. Download tau thiab txuag lub file, patch-common-SNA-FIRMWARE-20250403-M6-REL.iso.
   7. There are two ways of installing ISO:
      •  Installation Siv vKVM-Mapped vDVD
      • Installation Siv CIMC-Mapped vDVD

Ua ntej Installation
If you have firewall rules enabled for Cisco Integrated Management Controller (CIMC), specify 169.254.254.2 in the list of allowed hosts to ensure the update is successful. Otherwise you can skip this step and go to Installation Using vKVM-Mapped vDVD or Installation Using CIMC-Mapped vDVD, depending on your preferred installation method.

1. 1. Nkag mus rau hauv chav tsev Cisco Integrated Management Controller (CIMC) interface siv a web browser.
   2.  Choose Networking > Network Security.
   3. In the IP Filtering (Allow Listing) menu, enter 169.254.254.2 IP value in the IP filter field.
   4.  Nyem Txuag Hloov.

Installation Siv vKVM-Mapped vDVD
Txoj kev teeb tsa no hloov kho cov firmware los ntawm kev nkag mus rau firmware hloov tshiab ISO file khaws cia rau ntawm lub tshuab siv los txuas rau CIMC UI.
Txhawm rau nruab lub firmware thaj ntawm daim duab ISO, siv vKVM console ntawm lub tshuab M6.

1. 1. Nkag mus rau hauv chav tsev Cisco Integrated Management Controller (CIMC) interface siv a web browser.
   2. Select Launch KVM on the toolbar, if prompted, select HTML based KVM.
   3. The Virtual Console opens in a new browser tab.
   4. From the vKVM console, select Virtual Media to check for existing mappings. If any mappings exist (either vKVM-Mapped or CIMC-Mapped), eject them.
      Saib tus example hauv qab no rau ib daim ntawv qub qub kom eject.Cov duab tom ntej no qhia qhov screen thaum tsis muaj kev teeb tsa.
   5. From the vKVM console, select Virtual Media > vKVM-Mapped vDVD from the menu on the left side of the window to open the Map Virtual Media – CD/DVD dialog.
   6. In the Map Virtual Media – CD/DVD dialog box, browse to the locally stored SNA M6 appliance firmware ISO file, select it, and click Map Drive to map the local ISO to the SNA M6 appliance virtual drive.
   7. From the vKVM console, click Virtual Media from the menu on the left side of the window to verify that the ISO is mapped.
   8. Select Macros > Static Macros > CTRL-ALT-DEL to initiate the reboot process.
   9. Press the F6 key on your keyboard when the Cisco logo and boot messages appear in the vKVM console.
   10. When the Please select boot device: dialog box appears, select Cisco vKVM-Mapped vDVD2.00. Lub firmware hloov tshiab pib. CIMC tuaj yeem rov pib dua thaum lub sijhawm hloov tshiab, ua rau tsis muaj kev sib txuas ib ntus. Yog tias qhov no tshwm sim, nkag mus rau hauv CIMC dua thiab rov pib dua vKVM Console txhawm rau saib xyuas qhov hloov tshiab. Thaum lub firmware hloov tshiab tiav, ISO yuav raug tshem tawm lossis tshem tawm, thiab SNA cov cuab yeej yuav rov pib dua.
   11. Verify on the CIMC Chassis Summary page that the firmware has been updated.

Installation Siv CIMC-Mapped vDVD

Txoj kev teeb tsa no hloov kho cov firmware los ntawm kev nkag mus rau firmware hloov tshiab ISO file khaws cia rau ntawm HTTP / S server nkag tau los ntawm CIMC.
Txhawm rau txhim kho lub firmware thaj ntawm daim duab ISO, siv vKVM console ntawm lub tshuab M6.

1. 1. Nkag mus rau hauv chav tsev Cisco Integrated Management Controller (CIMC) interface siv a web browser.
   2. Select Launch KVM on the toolbar, if prompted, select HTML based KVM.Ib lub browser tshiab qhib rau lub virtual KVM console, tso tawm cov npe ntawm cov ntawv qhia zaub mov ntawm sab laug ntawm lub qhov rais.
   3. From the vKVM console, select Virtual Media to check for existing mappings. If any mappings exist (either vKVM-Mapped or CIMC-Mapped), eject them.
      Saib tus example hauv qab no rau ib daim ntawv qub qub kom eject.Cov duab tom ntej no qhia qhov screen thaum tsis muaj kev teeb tsa.
   4. From the vKVM console, select Virtual Media > CIMC-Mapped vDVD from the menu on the left side of the window to open the Map Virtual Media -CD/DVD dialog.
   5. In the Map Virtual Media – CD/DVD dialog box, complete the following steps:
      • In the Name field, enter a descriptive name (for example, Firmware_ 2025).
      • Hauv File Location field, enter the path to the ISO file.
      • If required, enter the Username and Password.
      • Nyem Map Drive.
   6. From the vKVM console, click Virtual Media to verify that the mapping is in effect.
   7. From the vKVM console, select Macros > Static Macros > Ctrl-Alt-Del to initiate the reboot process.
   8. Press the F6 key on your keyboard when the Cisco logo and boot messages appear in the vKVM console.
   9. When the Please select boot device: dialog box appears, select Cisco CIMC-Mapped vDVD2.00.The firmware update initiates. The CIMC may reboot during the update process, after which the firmware update will continue. A CIMC reboot will cause a temporary loss of connection. Log in to the CIMC again and re-launch the vKVM Console to monitor the update progress.
      After the firmware update is complete, the ISO will not be automatically unmapped. Be sure to manually unmap the ISO before performing another reboot.
   10.  In the vKVM console, after you see the message All files copied and verified, the ISO has been loaded and the firmware update begins. At this point, it is safe to eject or unmap the previously mapped firmware ISO.
   11. From the vKVM console, select Virtual Media and click the name of the previously configured mapping to eject or unmap it.
   12. Click Confirm to unmap the ISO file. Qhov hloov tshiab firmware txuas ntxiv mus, thiab rov pib dua tom ntej yuav pib SNA M6 khoom siv.
   13. On the CIMC Chassis Summary page, verify that the firmware has been updated to the expected version.

Hu rau Support

Yog tias koj xav tau kev pab txhawb nqa, thov ua ib qho hauv qab no:

• • Hu rau koj tus khub Cisco hauv zos
  •  Hu rau Cisco Support
    •  Qhib ib rooj plaub los ntawm web: http://www.cisco.com/c/en/us/support/index.html
    • Txhawm rau qhib rooj plaub los ntawm email: tac@cisco.com ib
    • Kev them nyiaj yug xov tooj: 1-800-553-2447 Ib (US)
    • Rau cov lej txhawb thoob ntiaj teb: www.cisco.com/en/US/partner/support/tsd_cisco_worldwide_contacts.html

Copyright Information
Cisco thiab Cisco logo yog cov cim lag luam lossis cov cim lag luam ntawm Cisco thiab / lossis nws cov koom tes hauv Asmeskas thiab lwm lub tebchaws. Rau view ib daim ntawv teev npe ntawm Cisco trademarks, mus rau qhov no URL: https://www.cisco.com/go/trademarks . Cov khoom lag luam thib peb tau hais tseg yog cov cuab yeej ntawm lawv cov tswv. Kev siv lo lus tus khub tsis hais txog kev sib koom tes ntawm Cisco thiab lwm lub tuam txhab. (1721R)
© 2025 Cisco Systems, Inc. thiab/los yog nws cov koom tes. Txhua txoj cai.

FAQ

Lub hom phiaj ntawm daim ntawv no yog dab tsi?

This document provides instructions for updating the CIMC firmware to version 4.3(5.250030) for UCS C-Series M6 hardware running Secure Network Analytics v7.5.0.

What are the prerequisites for this update?

Ensure all other available update patches for v7.5.0 are installed before beginning this update process.

What hardware does this patch apply to?

This patch applies to UCS C-Series M6 hardware, including Manager 2300, Data Node 6300, Flow Collector 4300, and Flow Sensors 1300, 3300, and 4300.

How can I download and install the update?

The update can be downloaded and installed via SWU or ISO. Detailed steps for both methods are provided in the document.

Kuv yuav ua li cas yog tias kuv ntsib teeb meem thaum hloov tshiab?

Contact Cisco Support or your local Cisco Partner for assistance. Contact details are provided in the document.

Cov ntaub ntawv / Cov ntaub ntawv

CISCO M6 Common Update Patch for Secure Network Analytics [ua pdf] Cov neeg siv phau ntawv qhia Manager 2300, Data Node 6300, Flow Collector 4300, Flow Sensor 1300, Flow Sensor 3300, Flow Sensor 4300, M6 Common Update Patch for Secure Network Analytics, Update Patch for Secure Network Analytics, Secure Network Analytics, Network Analytics, Analytics

Cov ntaub ntawv

• Cov neeg siv phau ntawv