Zita reChigadzirwa: Comms Logger
Comms
Logger Cold
Kutanga Guide

Red Hat ® Enterprise Linux
Red Hat ® Kunyoresa
ASTi's Comms Logger software yakagadzirirwa kumhanya pakumisikidzwa kweRed Hat® Enterprise Linux® mutengi. Izvi zvinogonesa kushanda pamwe neASTi's software, host routing software, uye ekunze maseva ekutaurirana. Sezvo zvakasanganisirwa mumaDVD ekutanga kutonhora ndiko kuisirwa kwakazara kweRed Hat® Enterprise Linux® mutengi. Iyi software haina kuvhurwa kune yazvino Red Hat kunyoreswa. Iro ibasa revashandisi vekupedzisira kumisa kunyoreswa kwavo uye kubatana neRed Hat Network. Kunyoreswa kweRed Hat kunopa mushandisi wekupedzisira rutsigiro, kugadzirisa, software, uye kuchengetedza gadziriso. Kuti uwane ruzivo rweRed Hat activation, enda kuRed Hat websaiti:
www.redhat.com/apps/activate

Export Restriction

Dzimwe nyika kunze kweUnited States dzinogona kurambidza kupinza, kushandisa, kana kutumira kunze kwesoftware ine tekinoroji yekuvharidzira. Nekumisikidza iyi software, unobvuma kuti iwe uchave wega mutoro wekuteedzera chero kupi kupinza, kushandisa, kana kurambidzwa kunze kwenyika. Kuti uwane ruzivo rwakakwana pamusoro peRed Hat kunze kwezvirambidzo, enda kune zvinotevera:
www.redhat.com/licenses/export

Nhoroondo yekudzokorora

Date	Kudzokorora	Versio	Comments
6/7/2017	B	0	Zvakagadziridzwa zvehuchokwadi, girama, uye maitiro.
2/5/2019	C	0	Yakagadziridzwa mirairo yeRed Hat 6. X.
10/21/2020	D	0	Yakagadziridzwa mirairo yeRed Hat 7. X.
2/22/2021	E	0	Yakawedzerwa "Gadzirisa RAID array," uye "Simbisa mamiriro eRAID drives."
3/10/2021	F	0	Yakabviswa yese yakaraswa yeRed Hat 6. X mareferensi, kusanganisira “Comms Logger inotonhora yekutanga maitiro e Red Hat 6.X." Yakagadziridzwa "(Inosarudzika) Ita m media cheki." Yakamepurwa ASTi system chikamu nhamba, software shanduro, uye BIOS shanduro kuti ijekese mu "Seta iyo BIOS."
7/28/2021	F	1	Yakagadziridza iyo 2U chassis dhizaini.
1/27/2022	F	2	Yakabvisa mareferensi ese eUniified Comms kubva pakutonhora kwekutanga maitiro. Akaita zvigadziriso zvidiki kugirama uye maitiro.
6/23/2022	F	3	Yakagadziridzwa iyo 2U chassis dhizaini kuti ibatanidze iyo Simba uye Hard Drive LEDs.

Nhanganyaya

Iyo inotonhora yekutanga maitiro (s) anotsanangurwa mugwaro rino anobvumidza iwe kuvaka Comms Logger masisitimu kubva kutanga. Iyi inotonhora yekutanga gwara inoreva Comms Logger software inoshanda pane yakasarudzika, matatu-drive hardware system, ine imwe huru dhiraivha uye maviri ekuwedzera madhiraivha, akaiswa muRAID1 array inoshandiswa chete kuchengetedza Comms Logger data. Pane zvikonzero zvitatu zvakakosha zvekushandisa iyo inotonhora yekutanga maitiro:

• Kuisa yazvino software vhezheni
• Kuvakazve dhisiki yakakanganisika
• Kugadzira madhisiki akaoma

Yambiro: Kuita kutonhora kwekutanga maitiro kunodzima iyo huru drive; zvisinei, iyo inotonhora yekutanga maitiro inochengetedza data pane maviri RAID1 array data madhiraivha.

Matanho anotevera anotsanangura maitiro ekutonhora ekutanga:

1. Kutsigira iyo Comms Logger server, enda kuChikamu 3.0, "Back up iyo Comms Logger server" papeji 4.
2. Kumisikidza BIOS, kuve nechokwadi chekuti kutonhora kwekutanga maitiro kunofamba nemazvo, enda kuChikamu 4.0, "Seta iyo BIOS" papeji 6.
3. (Sarudzo) Kuti utarise midhiya, enda kuChikamu 5.0, "(Sarudzo) Ita cheki yenhau" papeji 10.
4. Pedzisa maitiro ekutonhora ekutanga, dzima hard drive, uye isa iyo Red Hat uye = Comms Logger software. Kuti uwane mirairo yekutonhora yekutanga, enda kuChikamu 6.0, "Comms Logger inotonhora yekutanga maitiro eRed Hat 7. X" papeji 11.
5. Kudzoreredza iyo Comms Logger server, enda kuChikamu 7.0, "Dzosera iyo Comms Logger system" papeji 12.

Zvigadzirwa zvinodiwa

Kuti upedze iyo Comms Logger inotonhora yekutanga maitiro, iwe uchada zvinotevera zvinhu:

• Comms Logger 2U kana 4U papuratifomu ine inobvisika hard drive
• Keyboard
• Monitor
• (Zvichida) Mouse
• Comms Logger Kuisa Software DVD
• Network data
  • Eth0 IPv4 kero
  • Subnet mask

2.1 Rekodha network data
Kurekodha data retiweki yeserver yako, tevera matanho aya:

1. Kubva kumusoro kurudyi, enda kuna Manage ( ) > Network Configuration.
2. Rekodha kero yeIPv4 yemudziyo wako uye Subnet Mask kuitira ramangwana.

Chengetedza sevha yeComms Logger

Iyo inotonhora yekutanga maitiro inodzima zvachose iyo Comms Logger server's hard drive. Kuti uchengetedze data rako ipapo, tevera matanho aya:

1. Vhura a web browser pakombuta kana piritsi uchigovera network neComms Logger server.
2. Mune kero bar, isa iyo Comms Logger server's IP kero.
3. Pinda muComms Logger web interface uchishandisa zvinotevera default zvitupa:
   

   Username	Pasiwedhi
   admin	astirules

4. Kubva kumusoro kurudyi, enda kuna Manage ( ) > Backup/Dzosera.
5. Kugadzira backup nyowani yeComms Logger server yako, sarudza.
6. Kudhawunirodha backup kune komputa yako yemunharaunda hard drive, sarudza backup yekuchengeta.
7. Kuti uchengetedze backup yako, sarudza Dhawunirodha Yakasarudzwa ( ).

Gadzirisa BIOS

Kuti uone kuti kutonhora kwekutanga maitiro kunofamba nemazvo, gadzira iyo BIOS sekutsanangurwa kwazvino muzvikamu zvinotevera. Kutanga, tarisa iyo ASTi label kuseri kwechassis yechikamu chechikamu nhamba. Tafura 1, "Simbisa iyo system's BIOS" pazasi inoratidza iyo BIOS vhezheni iri kushandisa system:

Chikamu Nhamba	ASTi Software Version	Red Hat Version	BIOS Version
VS-REC-SYS VSH-57310-89	v2.0 uye gare gare	THE 7	Q17MX/AX
VS-REC-SYS VSH-27210-86	v1.0–1.1	THE 6	Q67AX

Tafura 1: Simbisa iyo BIOS system

4.1 BIOS Q17MX kana Q17AX
Kumisikidza BIOS vhezheni Q17MX kana Q17AX, tevera matanho aya:

1. Dzorerazve sevha, uye wobva wadzvanya Del seyo mabhoti ekuisa BIOS Setup Utility.
2. Dzvanya F3 kuvhura "Road Optimal Defaults?", uye sarudza Hongu.
3. PaMain, isa Zuva reSistimu uye Nguva YeSitimu uchishandisa Greenwich Mean Nguva.
4. Enda kuChipset> PCH-IO Configuration, uye isa zvinotevera:
   a. Onboard LAN1 Controller kuti Inogoneswa
   b. Onboard LAN2 Controller kuti Inogoneswa
   c. System State Mushure meKutadza Simba Kugara Kuripo
5. Dzvanya Esc. Enda kuChipset> System Agent (SA) Configuration, uye isa VT-d kuti Inogoneswa.
6. Dzvanya Esc. Enda kuAdvanced> CSM Configuration, uye isa Network to Legacy.
7. Kuchengeta uye kuseta patsva, tinya F4. Meseji yekusimbisa inokumbira, "Chengetedza gadziriso uye gadzirisazve?" Sarudza Hongu.
8. Sezvo sisitimu inotangazve, dzvanya Del kuti udzokere kuBIOS Setup Utility.
9. Enda kuAdvanced> CPU Configuration, uye isa zvinotevera:
   a. Hyper-threading to Disabled
   b. Intel Virtualization Technology inogoneswa
10. Dzvanya Esc. Enda kuAdvanced> SATA Configuration, uye isa SATA Mode Selection kuAHCI.
11. Dzvanya Esc. Enda kune Super IO Configuration> Serial Port 1 Configuration, uye isa Serial Port kuti Yakaremara.
12. Dzvanya Esc. Enda kuSerial Port 2 Port Configuration, uye isa Serial Port kuti Yakaremara.
13. Dzvanya Esc. Enda kuSerial Port 3 Port Configuration, uye isa Serial Port kuti Yakaremara.
14. Dzvanya Esc. Enda kuSerial Port 4 Port Configuration, uye isa Serial Port kuti Yakaremara.
15. Dzvanya Esc. Enda kuSerial Port 5 Port Configuration, uye isa Serial Port kuti Yakaremara.
16. Dzvanya Esc. Enda kuSerial Port 6 Port Configuration, uye isa Serial Port kuti Yakaremara.
17. Dzvanya Esc kaviri, enda kuBoot, uye isa iyo Boot Option Yekutanga sezvinotevera:
    a. Boot Option #1 kuDVD drive
    b. Boot Option #2 kune hard drive sarudzo
    c. Boot Option #3 kune network sarudzo
    d. Boot Option #4 yeAkaremara
    Cherechedza: Mazita e Hardware uye nhamba dzemodhi dzinogona kusiyana zvichienderana nerudzi rwehardware yako.
18. Kuchengeta uye kuseta patsva, tinya F4. Kana iyo "Sevha gadziriso uye reset?" meseji inobuda, sarudza Hongu. Mirira sezvo server inotangazve.

4.2 BIOS Q67AX 2.14.1219 uye gare gare
Kuti uise BIOS Q67AX 2.14.1219 uye gare gare, tevera matanho aya:

1. Dzorerazve sevha, uye wobva wadzvanya Del seyo mabhoti ekuisa BIOS Setup Utility.
2. Dzvanya F3, uye isa "Load Optimized Defaults?" kuna Hongu.
3. PaMain, isa Zuva reSistimu uye Nguva YeSitimu uchishandisa Greenwich Mean Nguva.
4. Enda kuChipset> PCH-IO Configuration, uye isa zvinotevera:
   a. Onboard LAN1 Controller kuti Inogoneswa
   b. Pabhodhi LAN2 Chishandiso cheKugoneswa
   c. Dzosera Kurasika Kwesimba re AC kuKubatidza Simba
5. Dzvanya Esc. Enda kuChipset> System Agent (SA) Configuration, uye isa VT-d kuti Inogoneswa.
6. michina. Enda kuBoot> CSM paramita, uye isa Launch PXE OpROM mutemo kune Legacy chete.
7. Kuchengeta uye kuseta patsva, tinya F4. Meseji yekusimbisa inokumbira, "Chengetedza gadziriso uye gadzirisazve?" Sarudza Hongu.
8. Sezvo sisitimu inotangazve, dzvanya Del kuti udzokere kuBIOS Setup Utility.
9. Dzvanya Esc. Enda kuAdvanced> CPU Configuration, uye isa zvinotevera:
   a. Hyper-threading to Disabled
   b. Intel Virtualization Technology inogoneswa
10. Dzvanya Esc. Enda kuSATA Configuration, uye isa SATA Mode Selection kuAHCI.
11. Dzvanya Esc. Enda kune SMART Settings, uye isa SMART Self Test kuti Inogoneswa.
12. Dzvanya Esc. Enda kune Super IO Configuration> COM1 Port Configuration, uye isa Serial Port kuti Yakaremara.
13. Dzvanya Esc. Enda kuCOM2 Port Configuration, uye isa Serial Port kuti Yakaremara.
14. Dzvanya Esc. Isa CIR Controller kuti Yakaremara.
15. Dzvanya Esc. Enda kuChipiri Super IO Configuration> COM3 Port Configuration, uye isa Serial Port kuti Yakaremara.
16. Dzvanya Esc. Enda kuCOM4 Port Configuration, uye isa Serial Port kuti Yakaremara.
17. Dzvanya Esc. Enda kuCOM5 Port Configuration, uye isa Serial Port kuti Yakaremara.
18. Dzvanya Esc. Enda kuCOM6 Port Configuration, uye isa Serial Port kuti Yakaremara.
19. Dzvanya Esc kaviri, uye enda kuTatu Super IO Configuration> COM7 Port Configuration.
    Seta Serial Port kuti Yakaremara.
20. Dzvanya Esc. Enda kuCOM8 Port Configuration, uye isa Serial Port kuti Yakaremara.
21. Dzvanya Esc. Enda kuCOM9 Port Configuration, uye isa Serial Port kuti Yakaremara.
22. Dzvanya Esc. Enda kuCOM10 Port Configuration, uye isa Serial Port kuti Yakaremara.
23. Dzvanya Esc kaviri, enda kuBoot, uye isa Boot Option Priorities sezvinotevera:
    a. Boot Option #1 kune DVD drive sarudzo
    b. Boot Option #2 kune hard drive sarudzo
    c. Boot Option #3 kune network sarudzo
    Cherechedza: Mazita e Hardware uye nhamba dzemodhi dzinogona kusiyana zvichienderana nerudzi rwehardware yako.
24. Dzvanya Esc. Enda kune Network Device BBS Priorities, uye isa zvinotevera:
    a. Boot Option #2 kune Yakaremara
    b. Boot Sarudzo #3 kune Yakaremara (kana iripo)
    c. Boot Sarudzo #4 kune Yakaremara (kana iripo)
    d. Boot Option #5 kune Yakaremara (kana iripo)
    e. Boot Sarudzo #6 kune Yakaremara (kana iripo)
    Cherechedza: Huwandu hwesarudzo dzebhutsu dzinogona kusiyana zvichienderana nekumisikidza kwako kwekunze kweEthernet.
25. Kuchengeta uye kuseta patsva, tinya F4. Kana iyo "Sevha gadziriso uye reset?" meseji inobuda, sarudza Hongu. Mirira sezvo server inotangazve.

(Sarudzo) Ita cheki yenhau

Tevedza mirairo iri pasi apa kuti uone kutendeseka kweComms Logger yekuisa midhiya.
Iyi nzira inobatsira kana iwe uchifungidzira dambudziko neDVD yako. Kuongorora kunokundikana kana a file paDVD haiverengeki nekuda kwekukwenya kana mavanga. Zviri mukati meDVD zvinofanirwa kungosimbiswa kamwe chete, kungave uri kutonhora-kutanga imwe kana akati wandei masisitimu ane DVD rimwe chete.

Yambiro: Kana kuongororwa kukabudirira, kutonhora kwekutanga maitiro kunotanga otomatiki, kudzima hard drive yako. Iwe haugone kuita cheki yemedia zvakasiyana kubva kune inotonhora yekutanga maitiro.

Kuti uone zviri muDVD, tevera matanho aya:

1. Batidza Comms Logger server. Sezvo ichibhoti, isa iyo Comms Logger Software Installation DVD mudhisiki drive mukati memasekonzi gumi ekuibatidza.
   Zvakakosha: Kana iyo Comms Logger server bhutsu kubva pakaoma dhiraivha, tangazve sisitimu, uye bata kiyi yeAlt painotangisa.
2. Pakuchimbidza kwebhoti, pinda cheki yemedia, uye wodzvanya Enter.
3. Iyo skrini inoratidza "Kutanga midhiya kutarisa pane mudziyo," uko mudziyo unomiririra zita remudziyo wehardware. Kuti ubvise cheki, tinya Esc. Muedzo unotora maminitsi angangoita mashanu kusvika gumi kuti upere.
4. Kana iyo media yekutarisa ikapfuura, iyo inotonhora yekutanga maitiro inotanga otomatiki. Kana kuongororwa kweDVD kukatadza, skrini inoratidza meseji "System yakamiswa". Kana zvakadaro, bata ASTi
   kugamuchira maDVD matsva esoftware.

Comms Logger inotonhora yekutanga maitiro eRed Hat 7. X

Kupedzisa Comms Logger kutonhora kwekutanga maitiro eRed Hat 7. X, tevera matanho aya:

1. Batanidza chekutarisa, keyboard, uye mbeva kune iyo Comms Logger server.
2. Batidza sevha.
3. Isa iyo Comms Logger Software Installation DVD, uye tangazve server.
4. Kana iyo Comms Logger yekugamuchira skrini ikabuda, tinya Enter kuti utange kuisa software. Mirira maminitsi 10-15 kuti kuiswa kupere. Zvichienderana nekugadziriswa kwetiweki yako, kuisa iSCSI kunogona kutora 20-25 maminetsi kuti apedze.
5. Bvisa uye/kana bvisa iyo Comms Logger Software Installation DVD.
6. Reboot server.
   Zvakakosha: Kana iyo system yakarembera mushure mekutangazve, tinya bhatani RESET kumberi kwechasisi.
7. Pinda muhurongwa uchishandisa zvinotevera default zvitupa:
   

   Username	Pasiwedhi
   mudzi	abcd1234

8. (Sarudzo) Kuseta IP kero uye subnet mask, isa ace-net-config -a xxx.xxx.xxx.xxx -n yyy.yyy.yyy.yyy, apo xxx.xxx.xxx.xxx ndiyo IP kero uye yyy.yyy.yyy.yyy ndiyo mambure.
   Iyi gadziriso inoisa iyo IP kero uye netmask yeEth0, iyo yaunogona kushandisa kuwana iyo Comms Logger. web interface kuburikidza nebrowser kuti upedze kuseta network.
9. (Sarudzo) Kuti uwane mamwe marongero etiweki, isa ace-net-config -h, uye wodzvanya Enter.
10. Kuti uite shanduko, isa reboot, uye tinya Enter.

Dzosera iyo Comms Logger system

Kudzoreredza iyo data yakachengetwa muChikamu 3.0, "Back up iyo Comms Logger server" papeji 4, tevera matanho aya:

1. Vhura a web browser pakombuta kana piritsi uchigovera network neComms Logger server.
2. Mune kero bar, isa iyo Comms Logger server's IP kero.
3. Pinda muComms Logger web interface uchishandisa zvinotevera default zvitupa:
   

   Username	Pasiwedhi
   admin	astirules

4. Kubva kumusoro kurudyi, enda kuna Manage ( ) > Backup/Dzosera.
5. Sarudza Bhurawuza, uye tsvaga backup pane yako yemuno system.
6. Sarudza .
7. Kana wakumbirwa, tangazve iyo Comms Logger server.
8. Kutevera reboot, pinda zvakare mu web interface.
9. Kubva kumusoro kurudyi, enda kuna Manage ( ) > Network Configuration.
10. Pa Network Configuration, enda kune Zvirongwa.
11. Pasi peGeneral Networking, muCloud ID, isa gore ID yeComms Logger server.
12. Pazasi kurudyi, pasi Pending Shanduko, sarudza Sevha Shanduko.
13. Pamusoro kurudyi, enda ku Scenario> Tangazve.
14. Ita shuwa kuti kiyi yerezinesi re USB yaiswa paComms Logger server.

Appendikisi A: Memory Test
Iyo Memory Muedzo chishandiso chinobatsira chekugadzirisa matambudziko kana uri kusangana nematambudziko akadai sekuvhara system, kutonhora, kudzoreredza zvisina tsarukano, kana magiraidhi/screen kukanganisa. ASTi inokurudzira kumhanyisa iyi bvunzo kakawanda kuti ive nechokwadi chekuti ndangariro inoshanda zvizere. Unogona kuda kumhanyisa bvunzo husiku.

Iyi Memory Test maitiro inoshanda kune Red Hat 6. X inoshanda system. Kuti upedze Memory Test, tevera matanho aya:

1. Batidza Comms Logger server.
2. Isa iyo Comms Logger Software Installation DVD, uye tangazve server.
3. Pakukurumidza, isa memtest, uye tinya Enter. Kuti uwane mhedzisiro yakanaka, rega iyo Memory Test ishande husiku.
4. Iyo Memory Test ichamhanya nekusingaperi kusvika nemaoko yamira. Kuti umise Memory Test, tinya kiyi Esc. Kana Memory Test yakundikana, bata ASTi kuti ubatsirwe.
5. Kuti udzorere iyo Comms Logger kushanda, bvisa iyo DVD, tangazve sevha, uye mirira kuti itangezve.

Appendix B: RAID arrays
Iyo Comms Logger server inouya neaviri anobviswa RAID1 madhiraivha anochengeta kurekodha.
Iwe unozofanirwa kupedzisa iyi mirairo yekumisikidza kana iwe ukaisa itsva RAID array kana kupukuta drive yako (semuenzaniso, nekuda kwezvikonzero zvekuchengetedza). Usati watanga, ita shuwa kuti watopedza Comms Logger kutonhora kwekutanga maitiro anotsanangurwa muChikamu 6.0, "Comms Logger inotonhora yekutanga maitiro eRed Hat 7. X" papeji 11.

Chitsauko ichi chinokurukura misoro inotevera:

• RAID array kumisikidza
• RAID array verification

B-1 Gadzirisa RAID array
Kuti umise iyo RAID array, tevera matanho aya:

1. Kune masisitimu akaomeswa, pinda muhurongwa uine zvinotevera:
   

   Username	Pasiwedhi
   astiadmin	admin

   Kuti uchinje kumudzi wemushandisi account, ita zvinotevera:
   a. Pinda su, wodzvanya Enter.
   b. Isa iyo midzi password (kureva, abcd1234 nekukasira), uye tinya Enter.
   Kune asina-akaomeswa masisitimu, pinda muhurongwa zvakananga semudzi:

   Username	Pasiwedhi
   mudzi	abcd1234

2. Pakukurumidza, isa ace-dis cap-setup-raid1, uye tinya Enter. Kana murairo ukabudirira, sisitimu inoburitsa yakarebesa kuburitsa inopera neinotevera:
   Kugadzira a file system inogona kutora maminetsi mashoma Yapedza kumisikidza raid1 array Ita shuwa kuti pane ikozvino kurekodha irikumhanya *yakagadzirwa uye yakatanga kurekodha {bvisa yekurekodha ID} Kuita chokwadi chekutsanangura dhairekitori rakagadzirwa uye rine mvumo chaiyo !!! ndapota tangazve muchina !!!
3. Reboot server.
4. Pinda muhurongwa uchishandisa zvinotevera default zvitupa:
   

   Username	Pasiwedhi
   mudzi	abcd1234

5. Kuti uone kurongeka kwedhiraivha, isa katsi/proc/mdstat, uye wodzvanya Enter.
6. Iyo skrini inoratidza resync = NN%, uko NN ndiyo yakapedzwa resync muzanatage.
   Mirira kweawa imwe kusvika maviri kuti resync ipere.
   Cherechedza: Iyo sisitimu haizowirirane kana iwe wakambogadzirisa madhiraivha seRAID (semuenzaniso, iwe wakabvisa uye wakadzoreredza madhiraivha kutsiva yakundikana mamaboard).
   Pane kudaro, iyo system inoburitsa yakabudirira kubuda, sekutsanangurwa pazasi.
7. Mhanya katsi /proc/mdstat nguva nenguva kuti utarise mamiriro esync. Kana iyo sisitimu yapera kuwiriranisa, inogadzira inobuda yakafanana neinotevera:
   Hunhu: [raid1] md0 : inoshanda raid1 sdb[0] sdc[1] 488386496 inovharira [2/2] [UU] zvishandiso zvisina kushandiswa:
   Huwandu hweiyo sub, sdc, uye zvivharo zvinogona kusiyana zvichienderana nekumisikidzwa kwako.
   Zvakakosha: Kana (F) ikaonekwa padivi pe sdb kana sdc (semuenzaniso, sdb[0](F) kana sdc[1](F)), dhiraivha yatadza. Bata ASTi pa support@asti-usa.com kuti ubatsirwe.
8. Reboot server.

B-2 Simbisa mamiriro eRAID drives
Kuti uone kuti madhiraivha eRAID akagadziridzwa nemazvo, tevera matanho aya:

1. Pinda muhurongwa uchishandisa zvinotevera default zvitupa:
   

   Username	Pasiwedhi
   mudzi	abcd1234

2. Kuti utore iyo Comms Logger's IP kero, nekukurumidza, pinda /sbin/ifconfig/eth0, uye tinya Enter.
3. Nyora pasi kero yeIP yeComms Logger (semuenzaniso, xxx.xxx.xxx.xxx).
4. Vhura a web browser pakombuta kana piritsi uchigovera network neComms Logger server.
5. Mune kero bar, isa iyo Comms Logger server's IP kero.
6. Pinda muComms Logger web interface uchishandisa zvinotevera default zvitupa:
   

   Username	Pasiwedhi
   admin	astirules

7. Pasi peRAID Status, simbisa Dhivha A uye Dhivha B kuratidza "Kumusoro:"

Kudzokorora F
Shanduro 3
Chikumi 2022
Gwaro DOC-UC-CL-CS-F-3
Nhoroondo ye Advanced Simulation Technology Inc.
500A Huntmar Park Drive • Herndon, Virginia 20170 USA
703-471-2104 • Asti-usa.com
Comms Logger Cold Start Guide
© Copyright ASTi 2022
Kodzero dzakaganhurirwa: kukopa uye kushandiswa kwegwaro iri kunoenderana nezvakapihwa muASTi's Software
Chibvumirano cheRezinesi (www.asti-usa.com/license.html).
Asti
500A Huntmar Park Drive
Herndon, Virginia 20170 USA
Copyright © 2022 Advanced Simulation Technology inc.

Zvinyorwa / Zvishandiso

ASTi Comms Logger masisitimu [pdf] Bhuku reMushandisi Comms Logger masisitimu, Logger masisitimu, masisitimu

References

• User Manual