Electrobes ESP32-S3 Development Board User Manual

ESP32-S3 Development Board

Fa'amatalaga o oloa:

Fa'amatalaga:

• Product Name: ESP32 Development Board
• Tufuga: Espressif Systems
• Fegalegaleai: Arduino IDE
• Feso'ota'iga uaealesi: WiFi

Fa'atonuga o le Fa'aaogāina o Mea:

1. La'uina i lalo Polokalama ma Atina'e Komiti:

To use the ESP32 development board, follow these steps:

1. Tikia le polokalama Arduino IDE mai le ofisa aloaia webnofoaga:
   Arduino IDE
   La'u mai
2. Open the Arduino IDE software.

2. Fa'aopoopo le ESP32 Atina'e Si'osi'omaga:

To add the ESP32 development environment to Arduino IDE:

1. Open Arduino IDE and go to File -> Manatu (ki pupuu
   'Ctrl+,').
2. Paste the JSON address
   ‘https://dl.espressif.com/dl/package_esp32_index.json’ into the
   Additional Board Manager URLs fanua.
3. Click ‘OK’ and return to the Arduino IDE homepage.
4. I le Atinaʻe Board Manager, suʻe le ESP32 ma faʻapipiʻi
   le siosiomaga atinae.

3. Select Port and Upload:

To select the port and upload code to the ESP32 development
laupapa:

1. Manually enter download mode by pressing and holding BOOT or
   following the specified method for ESP32C3.
2. Click ‘Upload’ in Arduino IDE and wait for the download to
   mae'a.

Once uploaded, the RGB lights on the module will flash normally,
indicating successful programming, and a WiFi connection will be
faavaeina.

Fesili e Fai soo (FAQ):

Q: How do I know if the ESP32 module is successfully
faapolokalameina?

A: Upon successful programming, the RGB lights on the module
will flash normally, and a WiFi connection will be established.

Q: Can I use other development environments with the ESP32
laupapa?

A: The ESP32 board is specifically designed for use with Arduino
IDE for optimal performance and compatibility.

faatonuga:

1. Si'i mai polokalame ma laupapa atinae

We use modules in Arduino IDE (which can be downloaded from the official webnofoaga)

https://www.arduino.cc/en/Main/Software Using the development environment as an example

to illustrate the usage of modules.

Open the Arduino IDE software

O lo'o fa'aalia le fa'aoga lea

2. Add ESP32 development environment ESP32 development environment add path In Arduino IDE, open File ->Preferences (ki pupu'u 'Ctrl+,'). lagolago https://dl.espressif.com/dl/package_esp32_index.json Tuu le tuatusi JSON o lenei laupapa atinae i totonu o le pepa faaopoopo I le webnofoaga o le pule o le komiti faafoe. Kiliki 'OK' (o le lomiga fou o le 'OK'). Toe kiliki 'OK' (o le lomiga fou o le 'OK') e toe foʻi i le itulau autu o le Arduino IDE.

Kiliki i luga o le Atinaʻe Board Manager, faʻaalia le faamalama o le Development Board Manager, suʻe le ESP32, ma faʻapipiʻi le siosiomaga atinaʻe
O mea fa'apipi'i e mafai ona fa'aoga sa'o. A maeʻa le faʻapipiʻiina o le faʻapipiʻiina, e mafai ona vaʻaia i le laupapa atinaʻe ua faʻaopoopoina le tele o lagolago mo modules ESP32.

Select the corresponding port and development board model Manually enter download mode: Method 1: Press and hold BOOT to power on. Method 2: Hold down the BOOT button on ESP32C3, then press the RESET button, release the RESET button, and then release the BOOT button. At this point, ESP32C3 will enter download mode.
Click upload and wait for the download to complete. The RGB lights on the module will flash normally and a WiFi connection will be established.

Pepa / Punaoa

Electrobes ESP32-S3 Development Board [pdf] Tusi Taiala ESP32-S3, ESP32-C3, ESP32-H2, ESP32-C6, ESP32-S3 Development Board, ESP32-S3, Development Board, Board

Fa'asinomaga

• Tusi Taiala