Elektwob-logo

Komisyon Devlopman Electrobes ESP32-S3

Electrobes-ESP32-S3-Development-Board-product

Espesifikasyon

  • Non pwodwi: ESP32 Komisyon Konsèy Devlopman
  • Manifakti: Sistèm Espressif
  • Konpatibilite: Arduino IDE
  • Koneksyon Wireless: WiFi

Enstriksyon yo

Download software and development board

  • Nou itilize modil nan Arduino IDE (ou ka telechaje yo nan paj ofisyèl la) website) https://www.arduino.cc/en/Main/Software. Using the development environment as an example to illustrate the usage of modules.
  • Louvri lojisyèl Arduino IDE aElectrobes-ESP32-S3-Development-Board-fig1. The following interface appears。Electrobes-ESP32-S3-Development-Board-fig2

Add ESP32 development environment

  • ESP32 development environment add path
  • In Arduino IDE, open File ->Preferences (shortcut key ‘Ctrl+,’).
  • Support https://dl.espressif.com/dl/package_esp32_index.json Put the JSON address of this development board into the attachment
  • Nan la websit jesyonè tablo devlopman an. Klike sou 'OK' (nouvo vèsyon an se 'OK'). Klike sou 'OK' ankò (nouvo vèsyon an se 'OK') pou retounen nan paj dakèy Arduino IDE a.Electrobes-ESP32-S3-Development-Board-fig3
  • Klike sou Development Board Manager la, fenèt Development Board Manager la ap parèt, chèche ESP32, epi enstale anviwònman devlopman an.Electrobes-ESP32-S3-Development-Board-fig4Electrobes-ESP32-S3-Development-Board-fig5
  • Ou ka itilize modil ki enstale yo dirèkteman. Apre enstalasyon ki pa fin enstale a, ou ka wè nan tablo devlopman an ke yo te ajoute anpil sipò pou modil ESP32 yo.Electrobes-ESP32-S3-Development-Board-fig7

Select the corresponding port and development board model

  • Manually enter download mode: Method 1: Press and hold BOOT to power on. Method 2: Hold down the BOOT button on ESP32C3, then press the RESET button, release the RESET button, and then release the BOOT button. At this point, ESP32C3 will enter download mode.Electrobes-ESP32-S3-Development-Board-fig8
  • Klike sou telechaje epi tann telechajman an fini. Limyè RGB yo sou modil la ap flache nòmalman epi yon koneksyon WiFi ap etabli.Electrobes-ESP32-S3-Development-Board-fig9Electrobes-ESP32-S3-Development-Board-fig10

FAQ

How do I know if the ESP32 module is successfully programmed?

Upon successful programming, the RGB lights on the module will flash normally, and a WiFi connection will be established.

Can I use other development environments with the ESP32 board?

The ESP32 board is specifically designed for use with Arduino IDE for optimal performance and compatibility.

Dokiman / Resous

Komisyon Devlopman Electrobes ESP32-S3 [pdfManyèl Itilizatè
ESP32-S3, ESP32-C3, ESP32-H2, ESP32-C6, ESP32-S3 Komisyon Konsèy Devlopman, ESP32-S3, Komisyon Konsèy Devlopman, Komisyon Konsèy

Referans

Kite yon kòmantè

Adrès imel ou p ap pibliye. Jaden obligatwa yo make *