Electrobes ESP32-S3 Development Board User Manual

ESP32-S3 Development Board

ຂໍ້ມູນຜະລິດຕະພັນ:

ຂໍ້ມູນຈໍາເພາະ:

• Product Name: ESP32 Development Board
• ຜູ້ຜະລິດ: Espressif Systems
• Compatibility: Arduino IDE
• ການເຊື່ອມຕໍ່ໄຮ້ສາຍ: WiFi

ຄໍາແນະນໍາການນໍາໃຊ້ຜະລິດຕະພັນ:

1. Download Software and Development Board:

To use the ESP32 development board, follow these steps:

1. Download the Arduino IDE software from the official webເວັບໄຊ:
   Arduino IDE
   ດາວໂຫຼດ
2. Open the Arduino IDE software.

2. Add ESP32 Development Environment:

To add the ESP32 development environment to Arduino IDE:

1. Open Arduino IDE and go to File -> Preferences (shortcut key
   ‘Ctrl+,’).
2. Paste the JSON address
   ‘https://dl.espressif.com/dl/package_esp32_index.json’ into the
   Additional Board Manager URLs ພາກສະຫນາມ.
3. Click ‘OK’ and return to the Arduino IDE homepage.
4. In the Development Board Manager, search for ESP32 and install
   the development environment.

3. Select Port and Upload:

To select the port and upload code to the ESP32 development
ກະດານ:

1. Manually enter download mode by pressing and holding BOOT or
   following the specified method for ESP32C3.
2. Click ‘Upload’ in Arduino IDE and wait for the download to
   ສໍາເລັດ.

Once uploaded, the RGB lights on the module will flash normally,
indicating successful programming, and a WiFi connection will be
ສ້າງຕັ້ງຂຶ້ນ.

ຄຳຖາມທີ່ຖາມເລື້ອຍໆ (FAQ):

Q: How do I know if the ESP32 module is successfully
ໂປຣແກມ?

A: Upon successful programming, the RGB lights on the module
will flash normally, and a WiFi connection will be established.

Q: Can I use other development environments with the ESP32
ກະດານ?

A: The ESP32 board is specifically designed for use with Arduino
IDE for optimal performance and compatibility.

ຄໍາແນະນໍາ:

1. Download software and development board

We use modules in Arduino IDE (which can be downloaded from the official webສະຖານທີ່)

https://www.arduino.cc/en/Main/Software Using the development environment as an example

to illustrate the usage of modules.

Open the Arduino IDE software

ການໂຕ້ຕອບຕໍ່ໄປນີ້ຈະປາກົດ

2. Add ESP32 development environment ESP32 development environment add path In Arduino IDE, open File ->Preferences (shortcut key ‘Ctrl+,’). support https://dl.espressif.com/dl/package_esp32_index.json Put the JSON address of this development board into the attachment In the website of the development board manager. Click ‘OK’ (the new version is’ OK ‘). Click ‘OK’ again (the new version is’ OK ‘) to return to the Arduino IDE homepage.

Click on the Development Board Manager, the Development Board Manager window appears, search for ESP32, and install the development environment
Installed ones can be used directly. After the uninstalled installation, it can be seen in the development board that a lot of support for ESP32 modules has been added.

Select the corresponding port and development board model Manually enter download mode: Method 1: Press and hold BOOT to power on. Method 2: Hold down the BOOT button on ESP32C3, then press the RESET button, release the RESET button, and then release the BOOT button. At this point, ESP32C3 will enter download mode.
Click upload and wait for the download to complete. The RGB lights on the module will flash normally and a WiFi connection will be established.

ເອກະສານ / ຊັບພະຍາກອນ

Electrobes ESP32-S3 Development Board [pdf] ຄູ່ມືຜູ້ໃຊ້ ESP32-S3, ESP32-C3, ESP32-H2, ESP32-C6, ESP32-S3 Development Board, ESP32-S3, Development Board, Board

ເອກະສານອ້າງອີງ

• ຄູ່ມືຜູ້ໃຊ້