Electrobes ESP32-S3 Development Board User Manual

ESP32-S3 Development Board

Informazione di u produttu:

Specificazioni:

• Product Name: ESP32 Development Board
• Produttore: Espressif Systems
• Compatibilità: Arduino IDE
• Connettività wireless: WiFi

Istruzzioni per l'usu di u produttu:

1. Scaricate u Software è a Scheda di Sviluppu:

To use the ESP32 development board, follow these steps:

1. Scaricate u software Arduino IDE da u situ ufficiale websitu:
   Arduino IDE
   Scaricate
2. Open the Arduino IDE software.

2. Aghjunghje l'ambiente di sviluppu ESP32:

To add the ESP32 development environment to Arduino IDE:

1. Open Arduino IDE and go to File -> Preferenze (scurtatura di tastiera
   'Ctrl+,').
2. Paste the JSON address
   ‘https://dl.espressif.com/dl/package_esp32_index.json’ into the
   Additional Board Manager URLcampu s.
3. Click ‘OK’ and return to the Arduino IDE homepage.
4. In u Manager di a Scheda di Sviluppu, cercate ESP32 è installatelu.
   l'ambiente di sviluppu.

3. Select Port and Upload:

To select the port and upload code to the ESP32 development
bordu:

1. Manually enter download mode by pressing and holding BOOT or
   following the specified method for ESP32C3.
2. Click ‘Upload’ in Arduino IDE and wait for the download to
   cumpletu.

Once uploaded, the RGB lights on the module will flash normally,
indicating successful programming, and a WiFi connection will be
stabilitu.

Domande Frequenti (FAQ):

Q: How do I know if the ESP32 module is successfully
prugrammatu ?

A: Upon successful programming, the RGB lights on the module
will flash normally, and a WiFi connection will be established.

Q: Can I use other development environments with the ESP32
bordu ?

A: The ESP32 board is specifically designed for use with Arduino
IDE for optimal performance and compatibility.

instructions:

1. Scaricate u software è a scheda di sviluppu

We use modules in Arduino IDE (which can be downloaded from the official websitu)

https://www.arduino.cc/en/Main/Software Using the development environment as an example

to illustrate the usage of modules.

Open the Arduino IDE software

L'interfaccia seguente appare

2. Add ESP32 development environment ESP32 development environment add path In Arduino IDE, open File ->Preferenze (accurtatoghju di tastiera 'Ctrl+,'). supportu https://dl.espressif.com/dl/package_esp32_index.json Inserite l'indirizzu JSON di sta scheda di sviluppu in l'allegatu In u websitu di u gestore di a scheda di sviluppu. Cliccate "OK" (a nova versione hè "OK"). Cliccate torna "OK" (a nova versione hè "OK") per vultà à a pagina iniziale di Arduino IDE.

Cliccate nant'à u Development Board Manager, a finestra Development Board Manager appare, cercate ESP32 è installate l'ambiente di sviluppu.
Quelli installati ponu esse aduprati direttamente. Dopu à l'installazione disinstallata, si pò vede in a scheda di sviluppu chì hè statu aghjuntu assai supportu per i moduli ESP32.

Select the corresponding port and development board model Manually enter download mode: Method 1: Press and hold BOOT to power on. Method 2: Hold down the BOOT button on ESP32C3, then press the RESET button, release the RESET button, and then release the BOOT button. At this point, ESP32C3 will enter download mode.
Click upload and wait for the download to complete. The RGB lights on the module will flash normally and a WiFi connection will be established.

Documenti / Risorse

Electrobes ESP32-S3 Development Board [pdfManuale d'usu ESP32-S3, ESP32-C3, ESP32-H2, ESP32-C6, ESP32-S3 Development Board, ESP32-S3, Development Board, Board

Referenze

• Manuale d'usu