Electrobes ESP32-S3 Ontwikkelingsbord
Spesifikasies
- Produk Naam: ESP32 Ontwikkelingsraad
- Vervaardiger: Espressif-stelsels
- Verenigbaarheid: Arduino IDE
- Draadlose konneksie: WiFi
Instruksies
Download software and development board
- Ons gebruik modules in Arduino IDE (wat van die amptelike webwerf afgelaai kan word). website) https://www.arduino.cc/en/Main/Software. Using the development environment as an example to illustrate the usage of modules.
- Maak die Arduino IDE sagteware oop
. The following interface appears。
Add ESP32 development environment
- ESP32 development environment add path
- In Arduino IDE, open File ->Preferences (shortcut key ‘Ctrl+,’).
- Support https://dl.espressif.com/dl/package_esp32_index.json Put the JSON address of this development board into the attachment
- In die webwebwerf van die ontwikkelingsbordbestuurder. Klik 'OK' (die nuwe weergawe is 'OK'). Klik weer 'OK' (die nuwe weergawe is 'OK') om terug te keer na die Arduino IDE-tuisblad.
- Klik op die Ontwikkelingsbordbestuurder, die Ontwikkelingsbordbestuurder-venster verskyn, soek vir ESP32 en installeer die ontwikkelingsomgewing.
- Geïnstalleerde modules kan direk gebruik word. Na die ongeïnstalleerde installasie kan dit in die ontwikkelingsbord gesien word dat baie ondersteuning vir ESP32-modules bygevoeg is.
Select the corresponding port and development board model
- Manually enter download mode: Method 1: Press and hold BOOT to power on. Method 2: Hold down the BOOT button on ESP32C3, then press the RESET button, release the RESET button, and then release the BOOT button. At this point, ESP32C3 will enter download mode.
- Klik op laai op en wag totdat die aflaai voltooi is. Die RGB-liggies op die module sal normaalweg flikker en 'n WiFi-verbinding sal tot stand kom.
Gereelde vrae
How do I know if the ESP32 module is successfully programmed?
Upon successful programming, the RGB lights on the module will flash normally, and a WiFi connection will be established.
Can I use other development environments with the ESP32 board?
The ESP32 board is specifically designed for use with Arduino IDE for optimal performance and compatibility.
Dokumente / Hulpbronne
 |
Electrobes ESP32-S3 Ontwikkelingsbord [pdfGebruikershandleiding ESP32-S3, ESP32-C3, ESP32-H2, ESP32-C6, ESP32-S3 Ontwikkelingsbord, ESP32-S3, Ontwikkelingsbord, Bord |