QUICK START GUIDE
Shark Navigator DLX NV70 Series
[ Please be sure to read the enclosed Shark® Owner’s Guide prior to using your unit. ]
WHAT’S INSIDE
A. Vacuum Pod
B. Motorized Floor Nozzle
C. Handle Assembly
D. Flexible Hose
E. Extension Wand
F. Upholstery Tool
G. 5.5” Crevice Tool
ASSEMBLY
EMPTYING THE DUST CUP
Empty the dust cup after each use.
MAINTENANCE
Wash foam and felt filters every 3 months and the post-motor filter once a year to keep the suction strong.
Rinse filters with water only and allow to air-dry completely. Tap loose dirt from filters as needed between washes.
Cleaning the Brushroll
1. Detach the pod from the floor nozzle.
2. Remove any blockages or buildup from the airways in the nozzle.
Carefully cut away any fibers, hair, or string wrapped around the brushroll. Avoid damaging or cutting the bristles.
2 WAYS TO CLEAN
FLOOR CLEANING
1. SETTING I
For cleaning bare floors or with accessories.
2. SETTING II
For carpet cleaning with brushroll.
To activate brushroll, step on floor nozzle and tilt handle back.
ABOVE-FLOOR CLEANING
1. To clean above-floor areas, remove the hose from the wand. Or for more reach, remove the wand from the pod.
2. Attach desired cleaning tool to hose or wand.
For additional parts and accessories, visit sharkaccessories.com
For questions or to register your product, visit us online at sharkclean.com
©2019 SharkNinja Operating LLC.
NV70Series_QSG_26_REV_Mv8
Download
Shark NV70 Series Navigator Professional:
Quick Start Guide – [Download PDF]
Owner’s Guide – [Download PDF]
