How do I turn off station 3 on the Hunter NODE-BT controller?
To turn off an active station on the Hunter NODE-BT controller, you can use the physical buttons on the device or the mobile app:…
Manuals+ Q&A
Controller questions & answers
Browse answered questions about Controller, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
Newest questionsHow do I set the ES-D controller so that the lights fade out sequentially (flow) when turned off by the push button instead of turning off all at once?
To ensure your lights turn off with a sequential flow (streaming) effect rather than turning off all at once, you need to adjust the…
Why does the fan run continuously in auto mode and not turn off when the desired temperature is reached?
In auto mode, the air conditioner is designed to adjust its operation based on the ambient temperature. The fan speed may continue to run…
Why is my RluxRV p7777c charging at 14.5V when the battery is at 100%, and will this damage the battery?
Based on the RluxRV p7777c manual, the charging voltage you are seeing is likely normal depending on your battery type and the current charging…
How do I reset the Aermec remote control and fix communication issues with the unit?
If your Aermec remote control is not communicating with the unit, you can try the following steps to reset and troubleshoot the connection: WIFI…
What is the first data point displayed on the screen regarding the solar panel input?
According to the Operation Guide (Section 3.4) of the PowMr POW-M60 Series manual, the first data point displayed on the left side of the…
How do I get the Jandy SpeedSet controller out of Welcome mode?
The 'Welcome' mode is typically part of the initial setup process. If your controller is stuck or has reverted to this mode, you may…
Where can I find the Finnish user manual for the SAWO Saunova 2.0 Power Controller?
While the manual currently hosted on Manuals+ is the English version, you can obtain the Finnish (suomenkielinen) manual directly from the manufacturer, SAWO Inc.…
How do I connect the sensor to the LCD display?
Based on the product manual for the EPT Sensor TLC2502LS, the connection between the sensor and the LCD display is established via a wired…
How do I pair the GuliKit TT MAX controller with a Switch console?
To pair your GuliKit controller with a Switch console, please follow these steps based on the ES PRO manual: Set Mode: Slide the mode…
Is the ACEGAMER AURORA controller compatible with Android 7.0, and how do I set it up?
Based on the official manual for the ACEGAMER AURORA PC Wireless Game Controller, there is no explicit mention of Android support. The manual only…
Why is my Dayliff Drytek controller showing 'Motor in Protection' and displaying 22A when the current limit is set to 16A?
The 'Motor in Protection' message indicates that the controller has detected an overload condition. Based on your description, the controller is measuring a running…
Why is my EasySMX X15 controller acting as a mouse instead of a gamepad when connected to my laptop via Bluetooth?
When the EasySMX X15 acts as a mouse on a PC, it is likely because it has been paired in the wrong Bluetooth mode.…
How can I reset the controller if it has entered battery protection mode after using a fast charger?
If your controller has become unresponsive or entered a protection state due to using an incompatible charger, you should perform a hardware reset. According…
Can the Solem BL-NR connect to home Wi-Fi and does it work if the phone is not nearby?
Based on the user guide, the Solem BL-NR is a Bluetooth-only controller. It does not have built-in Wi-Fi connectivity to connect directly to your…
Is this a real MPPT controller?
While the product is labeled as an MPPT Solar Charge Controller in the manual and on the device casing, there is a common point…
Can this controller be used with a Raspberry Pi Pico W?
The provided manual does not explicitly list the Raspberry Pi Pico W as a supported device. According to the specifications, the controller is officially…
How do I use the auto-attack or hold function instead of continuous manual pressing?
To automate the deployment of units (cats) without continuous manual pressing, you can use the Auto Attack Function. Follow these steps: Switch to Game…
What should I do if the R1 and L1 buttons fail simultaneously on my Tech4u T29 Wireless Controller?
If the R1 and L1 buttons on your Tech4u T29 Wireless Controller have stopped working at the same time, it may be due to…
How to clean the air filters?
While the provided remote controller manual does not include specific steps for physical filter cleaning, it mentions an Extended Ventilation function (also known as…
What does error code E7 mean on the Berger 269784 Solar Charge Controller?
Based on the manual for the Berger 269784 Solar Charge Controller, the device uses a specific format for error codes where E stands for…
How do I pair or fix the buttons on the THT-JS0201M remote control?
To 'fix' or pair the buttons on your THT-JS0201M remote control so that they operate the controller, follow these pairing steps: Pairing the Remote:…
What does the code b4-32 mean on the Mestic MPPT MSC-3010?
Based on the manual for the Mestic MPPT MSC-3010, there is no specific error or status code listed as "b4-32". However, the code likely…
Can the GameSir X5 Lite control a robotic lawnmower mapping application on a Samsung smartphone?
The GameSir X5 Lite is primarily designed as a mobile gaming controller for Android devices (version 8.0 or above) using a Type-C connection. Whether…