EasySMX X15 Game Controller User Manual

EasySMX X15 Game Controller

EasySMX X15 Game Controller

Dear customer

Thank you for purchasing our product.
Please read this user manualcarefully and keep it for further reference.

If you have any problems or suggestions, please contact us quickly and we will answer you as soon as possible.

Schematic Diagram

Schematic Diagram

Controller Power On/Off

Power On: Short press the HOME button to power on the controller;
Power Off: Long press the HOME button for 5 seconds to power off the controller.

2.4G Wireless Connection to PC

  1. Insert the receiver into the USB port of the PC;
  2. With the controller powered off, Click the HOME button, the controller LED indicators will flash, indicating that it has entered pairing mode;
  3. The LED indicators (LED2+LED3+LED4) will remain on, indicating that the connection is successful.
    [Note] If the controller fails to pair with the receiver, you can perform a forced pairing.
    1. Insert the receiver into a USB port on your computer, press the button on the receiver once briefly (it will flash quickly),
    2. Then power on the controller by pressing and holding the Home button for 3 seconds.
      The controller’s LED indicators will flash quickly, and when they become solid, the controller will vibrate briefly, indicating a successful pairing.

[Note] When connecting to a pc through the 2.4G usb receiver, you can switch mode between xinput/switch/dinput modes by long-pressing the “-” + “+” keys for 6 seconds.

Wired Connection to PC

Wired Connect the controller to the computer’s USB port using a data cable. The LED indicators (LED1+LED4) will remain on, indicating that the connection is successful.

Bluetooth Connection to PC

  1. Find the Bluetooth in computer Setting menu — “Add Bluetooth or Other Devices” page.
  2. With the controller powered off, long press the “X” and “HOME” buttons for 3 seconds until the led indicator (LED1+LED4) flash, then release to enter pairing mode.
  3. In the computer’s Bluetooth settings, search for “Xbox Wireless Controller” for pairing and connection. The LED indicators (LED1+LED4) will remain on, indicating that the connection is successful.

Connecting PC in Switch Mode

With the controller powered off, press down the right joysticks and hold it, connect to the PC via USB data cable.

Connecting SWITCH

  1. On the SWITCH main interface, click “Controller” → “Change Grip/Order”.
  2. With the controller powered off, long press the HOME button for 3 seconds. The led indicators will flash quickly, entering pairing mode. After 3-5 seconds, the led indicator will remain on, indicating successful connection.

Connecting Android Device

  1. With the controller powered off, long press the “A” + “HOME” buttons for 3 seconds until the led indicators L E2+LED3 flash, then release to pair the controller.
  2. Open the Bluetooth settings on the Android device and search for “EasySMX * 15 ^ prime prime for pairing. The LED indicators (LED * 2 + LED * 3) will remain on, indicating successfully connection.

Connecting iOS Device

  1. With the controller powered off, long press the “X” and “HOME” buttons for 3 seconds until the LED indicator (LED1+LED4) flash, then release to pair the controller.
  2. Open the Bluetooth settings on the iOS device and search for “Xbox Wireless Controller” for pairing. The LED indicators (LED1+LED4) will remain on, indicating successfully.

ABXY Key Swap Setting

Simultaneously press ” B “+” keys. The function of ABXY key can be switched between PC button layout and Switch button layout.

Macro Programming Setting

Click the Programming Button, controller enter programming mode when the led 2 and led 3 light up; then press the M1 button once and then press the desired programmed button such as A or AB button, then press M1 again to save the settings successfully.

Lighting Setting

RGB Light On/Off Toggle the RGB Lights Switch to turn on/off the RGB lights.
Light Mode Switching Press “-” + “D pad UP” button to adjust lighting to “Colorful” mode
Press “-” + “D pad Down” button to adjust lighting to “Steady” mode.
Color Adjustment Press “-^ prime +” D pad Left to adjust lighting color in a Positive direction.
Press “-” + “D pad Right” to adjust lighting color in a Negative direction.

Clear Macro Programming Setting

Long press the Programming SET Button for 5 seconds to clear all macro programming settings.

TURBO Setting

Manual Auto-fire:

Press T + A for the first time: Hold down the A button, and A will achieve continuous trigger.

Automatic Auto-fire:

Press T + A for the second time: click the A button, and A will achieve continuous trigger.

Cancel Auto-fire:

Press T + A for the third time: The continuous trigger function will be cleared.

[Note] Press and hold the Turbo button for 5 seconds to clear the Turbo function for all buttons.

Turbo Speed Adjustment

Turbo +”+”button increases the auto-fire speed; Turbo +”-“button reduces the auto-fire speed.

Motor Vibration Setting

Hold down “T” key and simultaneously move the left 3D joystick up/down to adjust vibration.

Charging Indicator

Charging while powered off:

All led indicators flash slowly, and when fully charged, all indicators turn off.

Charging in working state:

The current mode light flashes slowly, and when fully charged, the current mode light remains on.

Product Specifications

Model Number X15
Battery Capacity 1000mAh
Charging Current 400mA
Operating Current 60mA
Operating Temperature 5-45°C

Safety Information

Before using and operating the device, please read and follow the precautions below to ensure optimal device performance and to avoid dangers or illegal situations.

  1. Use the device within a temperature range of 0°C to 35°C and store the device and its accessories within -10°C to 40°C. Extreme temperatures may cause device malfunction.
  2. The device and its accessories may contain small parts. Keep them out of reach of children to prevent accidental damage or choking hazards.
  3. Avoid exposing the device and its accessories to rain or moisture to prevent fire or electric shock hazards.
  4. Keep the device and its batteries away from fire, high tempera-tures, and direct sunlight.
  5. Do not throw batteries into fire; do not disassemble, drop, crush, or modify batteries; avoid inserting foreign objects. Do not immerse batteries in water or other liquids; avoid external impacts and pressure on batteries to prevent leakage, overheating, fire, or explosion.
  6. Do not replace batteries by yourself to prevent damage that may lead to overheating, fire, or personal injury.
  7. Do not disassemble or modify the device (including replacing built-in batteries) and accessories without authorization, as this will void the warranty.
  8. Dispose of the device, batteries, and other accessories properly according to local regulations. Improper battery disposal may lead to explosion.

Customer Support

Amazon US: support.us@easysmx.com
Amazon FR: support.fr@easysmx.com
Amazon IT: support.it@easysmx.com
Amazon ES: support.es@easysmx.com
Amazon JP: support.jp@easysmx.com
Amazon DE: leslie@easysmx.com
Amazon UK: jane@easysmx.com
AliExpress: aliexpress@easysmx.com
Walmart: walmart@easysmx.com
Official Website: official@easysmx.comLogo

Documents / Resources

PDF thumbnailX15 Game Controller
User Manual · X15 Game Controller, X15, Game Controller, Controller

References

Questions and answers

Helpful product questions tied to this manual. Each item links to the full Q&A page.

Browse all questions about this manual

Questions & Answers

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

  1. Puedo conectar el mando vía alambrica (cableado) junto a un adaptador, a una Nintendo switch?

    Anonymous asks Puedo conectar el mando vía alambrica (cableado) junto a un adaptador, a una Nintendo switch?
    Manuals+ clarified question
    Question

    Can I connect the EasySMX X15 controller to a Nintendo Switch using a wired connection and an adapter?

    Answer

    Yes, you can connect the EasySMX X15 to a Nintendo Switch. While the manual primarily describes a wireless connection for the Switch, it also supports a Wired Connection via the USB-C port.

    To connect to a Nintendo Switch:

    • Ensure your Switch is in the dock or use a high-quality USB-C to USB-A adapter (OTG) if using it in handheld mode.
    • In the Switch system settings, ensure that Pro Controller Wired Communication is turned ON.
    • Connect the controller to the Switch using the USB data cable. The LED indicators (LED1-LED4) will flash and then remain solid once the connection is successful.

    Note: If you are using a third-party adapter to convert the signal, compatibility may vary depending on the specific adapter's firmware, but the controller itself supports standard wired input modes.

  2. How to connect to xbox series s

    🇬🇧 Anonymous asks How to connect to xbox series s
    Manuals+ clarified question
    Question

    How do I connect the EasySMX X15 controller to an Xbox Series S?

    Answer

    Based on the provided manual for the EasySMX X15 Game Controller, there are no specific instructions or mentions of compatibility for Xbox consoles (including the Xbox Series S). The manual only details connection methods for PC (2.4G Wireless and Wired), Nintendo Switch, Android devices, and iOS devices.

    Typically, third-party controllers like the X15 require a specific licensed security chip or a dedicated wireless adapter to function with Xbox consoles. Since the manual does not list Xbox support, it is likely that this controller is not natively compatible with the Xbox Series S unless used with a third-party console adapter (not included).

  3. Hello, When I connect my X15 to USB to charge, all led flashes with 1s interval, is it correct or the controller has something wrong?
    Thank you in advance

    🇮🇹 Stefano asks Hello, When I connect my X15 to USB to charge, all led flashes with 1s interval, is it correct or the controller has something wrong?
    Thank you in advance
    Manuals+ clarified question
    Question

    What do the flashing LEDs mean when charging the EasySMX X15 controller?

    Answer

    According to the EasySMX X15 User Manual, the behavior you are describing is normal. The manual specifies the following for the Charging Indicator:

    • Charging while powered off: All LED indicators will flash slowly (with approximately a 1-second interval). Once the controller is fully charged, all indicators will turn off.
    • Charging in working state: The current mode light (the LED corresponding to your connection mode) will flash slowly. When fully charged, the indicator will remain solid/steady.

    Since your LEDs are flashing while connected to USB, it indicates the controller is successfully charging. If they turn off after some time, it means the battery has reached a full charge.

  4. for some reason when I Bluetooth connect to my laptop the easy smx x15 acts as a mouse and doesn’t work with cloud gaming anymore

    🇬🇧 Anonymous asks for some reason when I Bluetooth connect to my laptop the easy smx x15 acts as a mouse and doesn't work with cloud gaming anymore
    Manuals+ clarified question
    Question

    Why is my EasySMX X15 controller acting as a mouse instead of a gamepad when connected to my laptop via Bluetooth?

    Answer

    When the EasySMX X15 acts as a mouse on a PC, it is likely because it has been paired in the wrong Bluetooth mode. To ensure it is recognized as a gamepad for cloud gaming, follow these steps:

    • Disconnect/Unpair: Go to your PC's Bluetooth settings and 'Forget' or 'Remove' the current controller entry.
    • Pair in PC Mode: With the controller powered off, press and hold the HOME button for 5 seconds until the LED indicators flash rapidly.
    • Search for Devices: On your PC, search for Bluetooth devices and select "Xbox Wireless Controller" (or the specific X15 identifier) to pair.
    • Switching Modes: If the controller is connected but not responding correctly, you can try switching between input modes (X-input/D-input) by pressing and holding the HOME button for 5 seconds while connected.

    Note: For the most stable connection on PC, using the included 2.4G USB receiver is recommended, as it automatically configures the controller in X-input mode for maximum compatibility with Windows and cloud gaming services.

    > >

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.