How do I get the Jandy SpeedSet controller out of Welcome mode?
The 'Welcome' mode is typically part of the initial setup process. If your controller is stuck or has reverted to this mode, you may…
Manuals+ Q&A
Jandy SpeedSet Variable-Speed Pump Controller User Guide — questions & answers
Read product questions and troubleshooting answers linked to Jandy SpeedSet Variable-Speed Pump Controller User Guide.
Browse topics
Answered questions
How do I replace the backup battery in the Jandy SpeedSet Variable-Speed Pump Controller?
Based on the provided Jandy SpeedSet Variable-Speed Pump Controller User Guide, there are no instructions or mentions of a user-replaceable backup battery. The manual…
What are the recommended speed and duration settings for a 32,000 gallon in-ground pool using the Jandy SpeedSet controller?
The Jandy SpeedSet Variable-Speed Pump Controller manual provides factory default settings but notes that you must program all SETTINGS (via MENU > Settings) to…
Can I use the CLEAN button to turn on the pump and lower the pool water level during a storm when the unit is currently off?
Yes, you can use the CLEAN button to turn on the pump even if it is not currently running. According to the manual, the…
How do I manually turn on the Jandy SpeedSet pump outside of its scheduled hours to lower water levels?
To operate your pump outside of its normal 8am to 6pm schedule, you can use the TIMED RUNS feature on the SpeedSet controller. This…