How do I pair or fix the buttons on the THT-JS0201M remote control?
To 'fix' or pair the buttons on your THT-JS0201M remote control so that they operate the controller, follow these pairing steps: Pairing the Remote:…
Manuals+ Q&A
Controller questions & answers
Browse answered questions about Controller, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
Newest questionsWhat does the code b4-32 mean on the Mestic MPPT MSC-3010?
Based on the manual for the Mestic MPPT MSC-3010, there is no specific error or status code listed as "b4-32". However, the code likely…
Can the GameSir X5 Lite control a robotic lawnmower mapping application on a Samsung smartphone?
The GameSir X5 Lite is primarily designed as a mobile gaming controller for Android devices (version 8.0 or above) using a Type-C connection. Whether…
What is the purpose of the unlabeled black rocker switch next to the RluxRV p7777c Solar Charge Controller?
The provided RluxRV p7777c Solar Charge Controller User Manual does not mention or illustrate any external rocker switches. The manual focuses on the features,…
Is it possible to pair the Tech4u T29 Wireless Controller as a Pro Controller on the Nintendo Switch 2? I tried via USB but it did not work.
Based on the official manual for the Tech4u T29 Wireless Controller, this device is specifically designed for use with the P4 console (PS4), P4…
What should I do if the wireless adapter for the PowerA XBGPSWLI controller is not turning on?
If your wireless adapter is not turning on or connecting to your controller, follow these troubleshooting steps provided in the manual: Check the Connection:…
Why is my HD-C16L controller not being detected when connected via a Cat network cable?
If your Huidu HD-C16L is not being detected when connected via a network cable, please check the following troubleshooting steps based on the manual:…
What should I do if the application no longer recognizes the controller after a forced firmware update?
If your LeadJoy Lightsaber Plus is no longer recognized by the "Dynamic Fingertips" app after a firmware update, please try the following troubleshooting steps:…
How to remove the memory function on the GREE XE73-44/E wired controller?
To remove or cancel the memory function on the GREE XE73-44/E wired controller, follow these steps: Ensure the unit is in the OFF state.…
How do I fix the 'rSt' error on the HS11A-1 controller when the desk won't lower below a certain height?
The "rSt" code on your HS11A-1 controller indicates that the desk needs to perform a Reset. This often happens if the desk's internal sensors…
How do I fix the rSt error and reset the desk when it won't go below a certain height?
The "rSt" code on your HS11A-1 controller indicates that the desk needs to complete a full reset cycle. To resolve this and allow the…
Where do I connect the thermostat/sensor wires on the Delta DTK Series Temperature Controller, and why is the temperature rising uncontrollably?
Based on the Delta DTK Series manual, the wiring for your sensor (which you referred to as the thermostat wires) depends on your specific…
Should I wire 12V solar panels in series to 24V for more efficient charging of 12V batteries with the Morningstar PS-30M?
No, you should not wire your 12V solar panels in series to 24V if you are charging a 12V battery bank with the Morningstar…
Why is my DUMBO-X10P power button flashing and why won't the transmitter turn off normally?
Based on the DUMBO-X10P manual, a flashing power button (status lamp) typically indicates that the device has entered a specific functional mode or is…
Why won't my GuliKit NS69 TT MAX controller select the anti-snapback setting (2 vibrations) when I press the buttons for joystick deadzone?
To configure the Joystick Dead Zone Mode on your GuliKit NS69 TT MAX, you must hold the Settings button (the gear icon) while pressing…
Is the Mooer C4 AirSwitch wireless footswitch compatible with the Mooer SD50 amplifier?
Based on the official Quick Start Manual, the Mooer C4 AirSwitch is specifically designed for use with the MOOER SD30 and SD75 Combo Amplifiers.…
How do I connect the Tech4u T29 Wireless Controller to a PC via Bluetooth when it is stuck blinking white?
Based on the Tech4u T29 Wireless Controller manual, there are specific steps to enter Bluetooth pairing mode for a PC. If your controller is…
How do I fix the issue where I cannot see the aura of my allies or the spike?
If you are unable to see teammate outlines or the spike, it is likely related to your interface settings or a specific hotkey. Based…
Why is my Hunter NODE-200 not switching to Zone 2 after Zone 1 finishes, and how can I manually start the sequence?
If your Hunter NODE-200 is not advancing to the second station, please check the following settings and manual operation tips: Check Run Times: Ensure…
What is the required cable length between the charge controller and the battery?
The manual for the PowMr MPPT-60A does not specify a maximum or minimum cable length; however, it provides specific requirements for the wire gauge…
Does the controller have Bluetooth?
No, the ECO-WORTHY EW1907-30A solar charge controller does not have Bluetooth functionality. Based on the user manual and technical specifications, the device features a…
Where is the sync button located on the Nintendo Switch Pro Controller?
The SYNC Button on the Nintendo Switch Pro Controller is located on the top of the controller, immediately to the left of the USB-C…
What do the parameters E9U, BSTY, LYU, and LDV mean, and why does the MPPT wait until the battery drops to 24V to start?
Based on the ICharger MPPT 6048 manual, here are the definitions for the parameters you mentioned: E9U (EQU): Equalization Charge Voltage. This is the…
How do I replace the backup battery in the Jandy SpeedSet Variable-Speed Pump Controller?
Based on the provided Jandy SpeedSet Variable-Speed Pump Controller User Guide, there are no instructions or mentions of a user-replaceable backup battery. The manual…