Why does the manual not match the ACiQ HP230B remote controller's actual operation?
It is common for remote controller manuals to cover multiple models, which can lead to confusion if your specific unit lacks certain features. According…
Manuals+ Q&A
Controller questions & answers
Browse answered questions about Controller, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
Newest questionsHow do I connect the XPY-8766 LED Bluetooth Symphony Controller to Alexa?
Based on the provided manual for the XPY-8766 LED Bluetooth Symphony Controller, this device uses Bluetooth 4.0 technology and the "LED LAMP" mobile app…
Why can't I change the input mode to X-input when using an OTG cable on Android with the Hechuang S11 controller?
According to the Hechuang S11 Wireless Controller manual, the device supports different connection modes depending on the platform. For wired connections (including OTG on…
How do I switch the Hechuang S11 Wireless Controller to X-input mode?
Based on the Hechuang S11 Wireless Controller manual, there are specific button combinations required to enter different pairing modes. If the controller is reverting…
How do I switch the Hechuang S11 Wireless Controller to X-input mode?
According to the Hechuang S11 manual, the RB + HOME button combination is indeed the correct method to enter Xbox Wireless Controller (X-input) mode.…
Why is my GMBACK HD-6900 controller not turning on or charging, even after a reset?
Based on your description, the controller is showing signs of life when specific buttons are pressed, but it is failing to enter a standard…
How do I wire a Request to Exit (REX) sensor to the ADC-AC-X1100-2PSE controller?
To wire a Request to Exit (REX) device to the ADC-AC-X1100-2PSE, you should use the auxiliary input terminals on the pre-installed X1100 controller board.…
Why is my Fantech WGP14 Nova controller recognized as a generic wireless controller via Bluetooth and not working in games, even though it works as an Xbox 360 controller via cable?
The Fantech WGP14 Nova is recognized as a DUALSHOCK 4 Wireless Controller when connected via Bluetooth, which uses the DirectInput standard rather than the…
How to program multiple start times?
To program multiple starts or schedules for your SOLEM BL-NR controller, you must use the MySOLEM app on your smartphone or tablet. Follow these…
What does the error code -p- mean on the KLT11IB controller?
Based on the KELD KLT11IB instruction manual, the symbol --- (which may appear as -p- or dashes on a 3-digit display) indicates a Short-circuit…
What is the purpose of the DO port cable included with the LG PREMTB101 controller?
The DO port on the LG PREMTB101 Standard III Wired Remote Controller stands for Digital Output. According to the product specifications, this port is…
How do I recalibrate the Shelly Dimmer Gen3 and adjust the dimming settings?
Yes, it is possible to recalibrate the Device. According to the technical documentation, calibration must be performed on a new device, after a factory…
Why is my EasySMX S10 Lite not connecting to the Nintendo Switch even after following the instructions, and could it be defective?
If your EasySMX S10 Lite is not connecting to your Switch, please double-check the following steps from the manual: Check the Mode Toggle: Ensure…
How do I change the frequency parameter from 50Hz to 60Hz on the HGM501 controller?
To change the rated frequency from 50Hz to 60Hz on the SmartGen HGM501, you must enter the parameter configuration mode. Note: Only change these…
How do I configure two different LED strips with different chips simultaneously on the SP638E controller?
Based on the manual for the Banlanxin SP638E, here is the information regarding controlling multiple strips: Single Output Port: The SP638E is a single-port…
What is the maximum solar panel wattage that the EW1907-30A solar charge controller can safely handle?
The maximum solar panel wattage for the ECO-WORTHY EW1907-30A depends on the voltage of your battery system. Based on the 30A rated current (Nennstrom)…
Why won't my Stinger under lights sync with Pandora or iHeartRadio music?
The Stinger Lighting app for the SPXDBTC ENLIGHT10 controller has specific limitations regarding how it interacts with music. According to the user guide, the…
How can I obtain or learn more about the HumiTherm-c Pro Temperature and Humidity PID Controller?
The PPI HumiTherm-c Pro is a dual-loop PID controller designed specifically for managing both Temperature and Relative Humidity (RH). Based on the manual and…
Can I control one PRIME Smart Outlet using two different cell phones?
Yes, you can control the same PRIME Smart Outlet from multiple cell phones. To do this, you should use the Prime Wire and Cable,…
How do I adjust the scaling for a 500 psi transducer on a Unitronics Vision 120 PLC when the input maxes out at 250 psi?
To resolve scaling issues where your 500 psi transducer is maxing out prematurely on a Vision 120, you must verify both the physical hardware…
Where can I find the wiring diagram for the Philips DDRC1220FR-GL Dynalite Relay Controller?
The wiring diagrams for the Philips DDRC1220FR-GL Dynalite Relay Controller are provided in the installation manual across several sections depending on your specific power…
Where is the '=' button on the VOYEE Wireless Controller?
Based on the VOYEE Wireless Controller layout, there is no physical button labeled with an '=' symbol. In the context of controller instructions (especially…
Can I use the remotes without downloading an app?
Yes, you can use the remote control without downloading the app. According to the manual, the Remote Control is preprogrammed and will work out…
How do I change the temperature settings on the STC-1000 if the screen stays on F1?
To set the temperature on your Haswill STC-1000, you must use a specific combination of button presses. If you are seeing F1 on the…