Maximal FDV Series
Zowonjezera Zamagetsi Amodzi
Access Power Controllers (PTC)
Kuyika Guide

Maximal7FDV Access Power Controllers

Zithunzi Zimaphatikizaponso:
Mtengo wapatali wa magawo 3FDV
- 12VDC @ 4.6A kapena 24VDC @ 5.2A.
- khumi ndi zisanu ndi chimodzi (16) zotetezedwa za PTC.
Mtengo wapatali wa magawo 5FDV
- 12VDC @ 8.6A.
- khumi ndi zisanu ndi chimodzi (16) zotetezedwa za PTC.
Mtengo wapatali wa magawo 7FDV
- 24VDC @ 9.2A.
- khumi ndi zisanu ndi chimodzi (16) zotetezedwa za PTC.

Chithunzi cha SFDV031115
Kuyika Kampani: _______________
Woimira Service: ________________
Adilesi: ________________________________
Phone #: ___________________________________

MaximalFDV Series Yathaview:

Altronix MaximalFDV Access Power / Controlers amagawa ndikusintha mphamvu kuti apeze machitidwe olamulira ndi zipangizo. Amasintha 220VAC (yogwira ntchito 198VAC - 256VAC), 50/60Hz kulowa mu khumi ndi zisanu ndi chimodzi (16) zoyendetsedwa modzilamulira 12VDC kapena 24VDC PTC zotuluka zotetezedwa. Zomwe zimatulutsidwa zimayendetsedwa ndi sinki yotsegulira yotsegula kapena nthawi zambiri yotsegula (NO) yoyambira yowuma kuchokera ku Access Control System, Keypad, Push Button, REX PIR, ndi zina zotero. , Kugunda kwa Magnetic Door Holders, ndi zina zotero FACP Interface imathandiza Emergency Egress, Alarm Monitoring, kapena ingagwiritsidwe ntchito kuyambitsa zipangizo zina zothandizira. Mbali yochotsa alamu yamoto imasankhidwa payekhapayekha pazotsatira zilizonse khumi ndi zisanu ndi chimodzi (16).

Tchati chosinthira MaximalFDV Series:

Magawo awa ndi oyenera mphamvu: masensa, zida zamagetsi zamagetsi (monga kugunda kwa zitseko zamagetsi).

MaximalFDV Series Features:

ACM8CB Access Power Controller Modules:

• Khumi ndi zisanu ndi chimodzi (16) amayambitsa zotuluka zoyendetsedwa paokha. Zosankha zotulutsa:
  a) Makumi ndi asanu ndi limodzi (16) Zosefera zosefedwa za Kulephera-Safe.
  b) Zotulutsa mphamvu zosefedwa khumi ndi zisanu ndi chimodzi (16) Zolephera-Kutetezedwa.
  c) Kuphatikiza kulikonse pamwambapa.
• Sikisitini (16) Access Control System imayambitsa zolowetsa. Zoyambitsa zolowetsa:
  a) Makumi ndi asanu ndi limodzi (16) omwe nthawi zambiri amatsegula (NO) zolowetsa zowuma.
  b) Zolowetsa khumi ndi zisanu ndi chimodzi (16) zotsegula.
  c) Kuphatikiza kulikonse pamwambapa.
• Makumi ndi asanu ndi limodzi (16) osasinthika aux osasinthika. zotulutsa mphamvu (zotulutsa zidavoteredwa @ 2.5A).
• Ma LED ofiyira pa bolodi la ACM8CB amawonetsa kuti zotulutsa zamunthu zimayambika (zopatsa mphamvu).
• Kulumikiza Alamu ya Moto (kutchingira kapena kusayakira) kumasankhidwa payekhapayekha pazotsatira zilizonse khumi ndi zisanu ndi chimodzi (16).
  Zoyambitsa zolowetsa za Fire Alarm:
  a) Nthawi zambiri lotseguka (NO) kapena lotsekeka (NC) zoyambitsa zowuma.
  b) Kusintha kwa polarity kuchokera kumagawo osayina a FACP.
• LED yobiriwira pa bolodi ya ACM8CB ikuwonetsa kuti kulumikizidwa kwa FACP kwayambika.
• FACP output relay ikuwonetsa kuti kulowetsa kwa FACP kwayambika (form "C" contact rated @ 1A/28VDC).
• Bolodi ya eFlow Power Supply/Charger imapereka mphamvu zofananira pama board onse a ACM8CB Access Power Controller (mawaya a fakitale) ndi zida zonse zolumikizidwa zolumikizira (mawaya akumunda).
• Ma fuse akuluakulu a ACM8CB adavotera @ 10A. Ma PTC otuluka adavotera @ 2.5A.

eFlow Power Supply/Charger:

• Kulowetsa: 220VAC (yogwira ntchito 198VAC - 256VAC), 50/60Hz.
• Za zotuluka voltage ndikupereka zomwe zilipo panopa ku MaximalFDV mndandanda wa Configuration Chart, pg. 3.
• Zothandizira zowonjezera zidavotera @ 1A (zosasinthika).
• Kupambanatage Chitetezo.
• Thumba loyikirapo la asidi osindikizidwa kapena mabatire amtundu wa gel.
• Malipiro apamwamba kwambiri 1.54A.
• Makinawa sinthani kuti muyime-batire pomwe AC yalephera.
  Kusamutsira ku mphamvu ya batri yoyima ndi nthawi yomweyo popanda kusokoneza.
• Kuyang'aniridwa kwa Alamu ya Moto kutulutsa (kutchingira kapena kusayatsa) 10K EOL resistor. Imagwira pa choyambitsa chotsegula (NO) kapena chotsekedwa (NC).
• AC yalephera kuyang'anira (ma fomu "C").
• Battery yalephera ndi kuyang'anira kupezeka (fomu "C" zolumikizana).
• Kuyimitsa kwamagetsi kochepa. Zimatseka ma terminals a DC ngati batire ili voltage akutsikira pansi 71-73% kwa 12V mayunitsi ndi 70-75% kwa mayunitsi 24V (malingana ndi magetsi). Imaletsa kutulutsa kwa batri lakuya.
• Kuti muwongolere ma fusesi, tchulani Tchati chosinthira MaximalFDV Series, pg. 3.
• Green AC Power LED ikuwonetsa 220VAC ilipo.
• Kulowetsa kwa AC ndi zizindikiro za DC zotulutsa za LED.
• Kutetezedwa kwafupipafupi komanso kuchulukirachulukira.
• Pansi pamakhala mabatire anayi (4) 12VDC/12AH.
  Miyeso ya mpanda (H x W x D): 26" x 19" x 6.25" (660.4mm x 482.6mm x 158.8mm).

Malangizo oyika MaximalFDV:

Njira zama waya zizikhala molingana ndi National Electrical Code/NFPA 70/ANSI, Canadian Electric Code, Part I, Part II komanso ma code onse amderali ndi maboma omwe ali ndi ulamuliro. Zogulitsazo zimangogwiritsidwa ntchito m'nyumba zokha.

Magetsi Board Diagnostics LED	(tsamba 6)
Access Power Controller LED Diagnostics	(tsamba 6)
Power Supply Board Terminal Identification	(tsamba 6)
Access Power Controller Terminal Identification	(tsamba 7)
Makhalidwe A Battery Oyimilira Ndi Mphamvu	(tsamba 7)
Power Supply Board Output Voltage Zikhazikiko	(tsamba 7)
Access Power Controller Typical Application Diagram	(tsamba 8)
Zithunzi za FACP/Zosankha Zopangira Magetsi	(tsamba 11)

1. Mount unit pamalo omwe mukufuna. Chongani ndi kubowolatu pakhoma kuti mugwirizane ndi mabowo atatu apamwamba omwe ali m'khomamo. Ikani zomangira zitatu zam'mwamba ndi zomangira pakhoma ndi mitu yopindika. Ikani mabowo a makiyi apamwamba pamwamba pa zomangira zitatu zakumtunda, mulingo ndi motetezeka. Lembani malo a mabowo atatu apansi. Chotsani mpanda. Boolani mabowo apansi ndikuyika zomangira zitatu. Ikani mabowo a makiyi apamwamba pamwamba pa zomangira zitatu zakumtunda. Ikani zomangira zitatu zapansi ndikuonetsetsa kuti mukungitsa zomangira zonse (Enclosure Dimensions, pg. 12).
2. Lumikizani mphamvu ya AC yosasinthika (220VAC 50/60Hz) ku malo olembedwa [L, N] (Mkuyu 3, p. 9). Osagwiritsa ntchito terminal yolembedwa [G]. Gwiritsani ntchito 14 AWG kapena kukulirapo pamalumikizidwe onse amagetsi. Tetezani mawaya apansi otsogolera ku lug lapansi.
   Sungani mawaya opanda mphamvu osiyana ndi mawaya opanda mphamvu.
   Malo osachepera 0.25" ayenera kuperekedwa.
   CHENJEZO: Osagwira zitsulo zowonekera. Tsekani mphamvu yoyendera nthambi musanayike kapena kutumizira zida. Palibe magawo omwe angagwiritsidwe ntchito mkati. Bweretsani kuyika ndi kutumiza kwa ogwira ntchito oyenerera.
3. Sankhani zomwe mukufuna kutulutsa DC voltage poika SW1 pamalo oyenera pa Maximal3FDV magetsi (mkuyu 1a, pg. 7). Mphamvu ya Maximal5FDV ndi fakitale yokhazikitsidwa ku 12VDC ndipo mphamvu ya Maximal7FDV imayikidwa fakitale ku 24VDC.
4. Yezerani voltage wa unit musanalumikizane ndi zida zilizonse kuti zitsimikizire kuti zikuyenda bwino. Mphamvu yolakwika kapena yokwera kwambiritage adzawononga zipangizozi.
5. Zosankha zotulutsa (mkuyu 2, tsamba 8):
   Chigawochi chipereka mphamvu zosinthira khumi ndi zisanu ndi chimodzi (16), zotulutsa khumi ndi zisanu ndi chimodzi (16) zowuma "C", kapena kuphatikiza kwa mphamvu zonse ziwiri ndi "C" zotuluka.
   (a) Zotulutsa Mphamvu za Fail-Safe Switched Power:
   Kuti mugwiritse ntchito Fail-Safe, gwirizanitsani zolowetsa zabwino (+) za zida zowongolera zolowera ku terminal yolembedwa [NC]. Lumikizani zosokoneza (-) za zida zowongolera zolowera ku terminal yolembedwa [COM].
   (b) Zotulutsa Mphamvu za Fail-Secure Switched Power:
   Kuti mugwiritse ntchito Fail-Secure, lumikizani zabwino (+) za zida zowongolera zolowera ku terminal yolembedwa [NO]. Lumikizani zosokoneza (-) za zida zowongolera zolowera ku terminal yolembedwa [COM].
6. Zotulutsa za ACM8CB Auxiliary Power (zosasinthika):
   Lumikizani zida zowongolera zolowera zomwe zimafuna mphamvu nthawi zonse kumatheminali olembedwa [C] zabwino (+) ndi [COM] zoipa (-). Zotulutsa zitha kugwiritsidwa ntchito kupereka mphamvu kwa owerenga makhadi, ma keypad, ndi zina.
   Zotulutsa Zothandizira za eFlow (zosasinthika):
   Pakulumikiza kwa chipangizo chothandizira izi sizingakhudzidwe ndi Low Power Disconnect kapena Fire Alarm Interface. Lumikizani chipangizo kumalo otchedwa [+ AUX -] (mkuyu 3, p. 9).
7. Zoyambitsa zolowetsa (mku. 2, tsamba 8):
   (a) Nthawi zambiri Tsegulani [NO] choyambitsa cholowetsa:
   Zolowetsa 1-8 zimayatsidwa ndi zolowetsa zotsegula kapena zotsegula. Lumikizani zotuluka pagulu lowongolera, makiyi, mabatani okankhira, ma REX PIR, ndi zina zambiri kumatheshoni olembedwa [IN] ndi [GND].
   (b) Tsegulani zolowetsa za Collector Sink:
   Lumikizani cholumikizira chotsegulira chotsegulira (+) ku ma terminals olembedwa [IN] ndi choyipa (-) ku matheminali olembedwa [GND].
8. Zosankha za ACM8CB Fire Alamu Interface (Mkuyu 5-9, tsamba 11):
   [NC] nthawi zambiri imatsekedwa kapena yotsegula [NO] choyambitsa cholowera kuchokera pagulu lowongolera alamu yamoto kapena cholowetsa chosinthira polarity kuchokera pagawo losaina la FACP chidzakhudza zotulukapo zosankhidwa.
   Kuti mutsegule FACP Disconnect kuti itulutse, zimitsani masiwichi [SW1-SW8] YOZIMU pa bolodi lililonse la ACM8CB. Kuti mulepheretse kulumikizidwa kwa FACP kuti mutulutse, yatsani zosinthira zofananirazo [SW1-SW8] IYALI pa bolodi lililonse la ACM8CB.
   (a) Nthawi zambiri Tsegulani [NO] zolowetsa:
   Kwa osakokera mbedza onetsani chithunzi 6, p. 11. Pakulumikiza mbedza tchulani mkuyu 7, p. 11.
   (b) Zomwe Zimatsekedwa [NC] Nthawi zambiri:
   Kwa osakokera mbedza onetsani chithunzi 8, p. 11. Pakulumikiza mbedza tchulani mkuyu 9, p. 11.
   (c) Choyambitsa cholowera cha FACP Signaling Circuit:
   Lumikizani zabwino (+) ndi zoipa (-) kuchokera ku FACP yotulutsa siginecha kupita kumalo olembedwa [+ INP -]. Lumikizani FACP EOL ku matheminali olembedwa [+ RET –] (poyera imatchulidwa ngati alamu). Jumper yomwe ili pafupi ndi TRG LED iyenera kudulidwa (mkuyu 5, p. 11).
9. FACP Dry form "C" zotuluka (mkuyu 2b, tsamba 8):
   Ma fomu a FACP "C" atha kugwiritsidwa ntchito kuyambitsa malipoti kapena kusaina zida.
   Izi zimasinthira pa cholumikizira cha alamu yamoto kupita ku matabwa a ACM8CB.
10. Kulumikizitsa Battery Yoyimirira (mkuyu 3, tsamba 9):
    Pamapulogalamu a Access Control mabatire ndi osankha. Mabatire akapanda kugwiritsidwa ntchito, kutayika kwa AC kumapangitsa kuti mphamvu yamagetsi iwonongeketage. Ngati mukufuna kugwiritsa ntchito mabatire oyimilira, ayenera kukhala acid acid kapena gel osakaniza. Lumikizani batire ku ma terminals olembedwa [- BAT +] (Mkuyu 3, p. 9). Gwiritsani ntchito mabatire awiri (2) 12VDC olumikizidwa mndandanda wa 24VDC opareshoni (mabatire amatsogolera akuphatikizidwa). Gwiritsani ntchito mabatire - Casil CL1270 (12V/7AH), CL12120 (12V/12AH), CL12400 (12V/40AH), CL12650 (12V/65AH) mabatire kapena mabatire a UL odziwika ndi BAZR2 ndi BAZR8 a mlingo woyenera.
11. Zotuluka mu Battery ndi AC Supervision (mkuyu 3, tsamba 9):
    M'pofunika kulumikiza zipangizo zochitira malipoti zavuto kwa oyang'anira kuzinthu zolembedwa kuti [AC Fail, BAT Fail] zotulutsa zolembedwa [NC, C, NO] ku zida zoyenera zowonera.
    Gwiritsani ntchito 22 AWG mpaka 18 AWG pa AC Fail & Low/No Battery lipoti.
12. Kuti muchedwetse lipoti la AC kwa ma 2 hrs., ikani kusintha kwa DIP [Kuchedwa kwa AC] kupita ku ZOZIMA malo (mkuyu 3, p. 9).
    Kuti muchedwetse lipoti la AC kwa 1 min., ikani kusintha kwa DIP [Kuchedwa kwa AC] kupita ku ON malo (Mkuyu 3, p. 9).
13. Kuyimitsa Alamu ya Moto (mkuyu 3, tsamba 9):
    Kuti mutsegule Alamu ya Moto Disconnect ikani kusintha kwa DIP [Kuzimitsa] kukhala ON malo.
    Kuti muyimitse Alamu ya Moto Chotsani chotsani chosinthira cha DIP [Chotseka] kuti CHOZIMITSA.
14. Kuyika kwa tamper switch (mkuyu 3b, tsamba 9):
    Mount UL Listed tamper switch (Altronix Model TS112 kapena yofanana) pamwamba pa mpanda. Tsegulani tamper switch bracket m'mphepete mwa mpanda pafupifupi 2" kuchokera kumanja (mkuyu 3b, p. 9).
    Lumikizani tampsinthani mawaya kupita ku Access Control Panel kapena chipangizo choyenera cha UL Listed reporting. Kuti mutsegule chizindikiro cha alamu, tsegulani chitseko cha mpanda.
15. Zowonjezera mphamvu zambiri (mkuyu 2, tsamba 8):
    Mukamagwiritsa ntchito magetsi owonjezera akunja, ma jumpers J1 ndi J2 omwe ali pa bolodi lolingana la ACM8 ayenera kudulidwa (mkuyu 2c, 2d, pg. 8). Lumikizani magetsi owongolera olowera kunja ku ma terminals olembedwa [- Control +] (Ma terminals awa akufanana ndi [- Power +] terminals). Mukamagwiritsa ntchito magetsi a DC, polarity iyenera kuwonedwa. Mukamagwiritsa ntchito magetsi a AC, polarity siyenera kuwonedwa.
    (Mkuyu. 2d, pg. 8) Onse kumunda mawaya malumikizidwe ayenera kukhala ntchito n'zotsimikizira oyenera CM kapena FPL jakete waya kapena choloweza chofanana (mkuyu. 4a, pg. 10).

Kusamalira:

Kusamalira: Gawo liyenera kuyesedwa kamodzi pachaka kuti ligwire bwino ntchito motere:
Kuyang'anira FACP: Kuti muwonetsetse kuti kulumikizana koyenera ndikugwira ntchito kwa kulumikizana kolumikizidwa kwa Alamu ya Moto, chonde tsatirani njira yoyenera ili m'munsiyi: Nthawi zambiri Zolowetsa Zotsegula: Kuyika kachidule pakati pa materminal olembedwa [T] ndi [+ INP] kumayambitsa Kuchotsa Alamu ya Moto. Chotsani mwachidule kuti mukonzenso.
Zolowetsa Nthawi Zonse Zotsekedwa: Kuchotsa waya kutheminali yolembedwa [INP –] kudzayambitsa Kuchotsa Alamu ya Moto. Sinthani waya kutheminali yolembedwa [INP -] kuti muyikenso.
Kulowetsa kwa Chizindikiro cha FACP: Ndikofunikira kuyambitsa Alamu ya Moto. Muzochitika zonse pamwambapa mawonekedwe obiriwira a TRG a ACM8 adzawunikira. Zonse zomwe zasankhidwa pa Fire Alarm Disconnect zidzayambitsa zida zotulutsa zotsekera.
Zindikirani: Zonse zomwe zatuluka [OUT 1 – OUT 8] ziyenera kukhala zokhazikika (zopanda mphamvu) musanayesedwe. Pamene unit ndi configuredfor Normal Open (mkuyu. 7, p. 11) kapena Normal Kutsekedwa (mkuyu. 9, p. 11) latching ntchito m'pofunika bwererani Alamu Alamu Chotsani Chotsani mwa activated Mwachizolowezi Chatsekedwa Bwezerani lophimba.
Kutulutsa VoltagE Mayeso: Pansi pa katundu wabwinobwino, kutulutsa kwa DC voltage iyenera kufufuzidwa ngati voliyumu yoyeneratage mlingo (onani ku MaximalFDV mndandanda wa Configuration Chart, pg. 3).
Mayeso a Battery: Pansi pa katundu wamba fufuzani kuti batire ili ndi chaji, yang'anani voltage pamalo ophatikizira mabatire komanso pamalo opangira ma board omwe amalembedwa [+ BAT -] kuwonetsetsa kuti palibe kusweka kwa mawaya olumikizira batire.
Zindikirani: Malipiro apamwamba kwambiri ndi 1.54A. Moyo wa batri woyembekezeka ndi zaka 5; komabe, tikulimbikitsidwa kusintha mabatire mkati mwa zaka 4 kapena kuchepera ngati kuli kofunikira.

Kuwunika kwa LED kwa Power Supply Board:

Chofiira (DC)	Chobiriwira (AC/AC1)	Mkhalidwe Wopereka Mphamvu
ON	ON	Mkhalidwe wabwinobwino wogwirira ntchito.
ON	ZIZIMA	Kutaya kwa AC. Batire yoyimilira yopereka mphamvu.
ZIZIMA	ON	Palibe zotulutsa za DC.
ZIZIMA	ZIZIMA	Kutaya kwa AC. Batiri lotulutsidwa kapena lopanda kuyimilira. Palibe zotulutsa za DC.

Chofiira (Mleme)	Mkhalidwe wa Battery
ON	Mkhalidwe wabwinobwino wogwirira ntchito.
ZIZIMA	Batire yalephera/kuchepa kwa batire.

Access Power Controller LED Diagnostics:

LED	ON	ZIZIMA
LED 1- LED 8 (Yofiira)	zotulutsa zopatsa mphamvu.	Kutulutsa kotulutsa mphamvu kopanda mphamvu.
Trg (Wobiriwira)	Kulowetsa kwa FACP kuyambika (ma alarm).	FACP yachibadwa (yopanda ma alarm).

Chizindikiritso cha Power Supply Board Terminal:

Mbiri ya Terminal	Ntchito/Kufotokozera
L, N	Lumikizani 220VAC 50/60Hz kumalo awa: L mpaka kutentha, N kusalowerera ndale. Osagwiritsa ntchito terminal yolembedwa [G]
+ DC -	Fakitale yolumikizidwa ndi ACM8 board.
Kuyambitsa EOL Kuyang'aniridwa	Chiyankhulo cha Alamu ya Moto chimayambitsa kulowetsa kuchokera kufupi kapena FACP. Zolowetsa zoyambitsa zimatha kukhala mwachizolowezi kutsegulidwa, kawirikawiri kutsekedwa kuchokera ku gawo la FACP (Mkuyu 3, p. 9).
AYI, GND RESET	FACP mawonekedwe latching kapena sanali latching (mkuyu 3, p. 9).
+ AUX -	Kutulutsa kothandizira kudavotera 0 1A (osasinthika) (mkuyu 3, pg. 9).
AC YAKHALITSA NC, C, NO	Zimasonyeza kutayika kwa mphamvu ya AC, mwachitsanzo kulumikiza ku chipangizo chomveka kapena alamu. Relay nthawi zambiri imakhala ndi mphamvu ngati mphamvu ya AC ilipo. Contact mlingo 1A 0 30VDC (mkuyu 3, p. 9).
MLEME WAKHALITSA NC, C, NO	Imawonetsa kutsika kwa batire, mwachitsanzo kulumikizana ndi gulu la alamu. Kutumizirana zinthu zambiri kumakhala ndi mphamvu pamene mphamvu ya DC ilipo. Kulumikizana ndi 1A 0 30VDC. Batire yochotsedwa imanenedwa mkati mwa mphindi 5. Kulumikizananso kwa batri kumanenedwa mkati mwa miniti ya 1 (mkuyu 3, p. 9).
+ BAT -	Kulumikizana kwa batire yoyimilira. Malipiro apamwamba panopa 1.54A (mkuyu 3, p. 9).

Chizindikiritso cha Terminal Power Controller:

Mbiri ya Terminal	Ntchito/Kufotokozera
- Mphamvu +	12VDC kapena 24VDC kuchokera kumagetsi / chojambulira (fakitale yolumikizidwa). Ma terminals awa akufanana ndi [— Control +] materminal.
- Control +	Materminal awa akufanana ndi [- Power +] materminal. Ma terminals awa amatha kulumikizidwa kumagetsi owongolera olowera kunja kuti apereke akutali ntchito mphamvu kwa zipangizo. Jumpers J1 ndi J2 ayenera kuchotsedwa.
TRIGGER INPUT1 - ZOTHANDIZA 8 MU, GND	Kuchokera pamalowedwe otsegulira otseguka komanso/kapena otsegulira okhometsa (pempho lotuluka mabatani, kutuluka PIRs, etc.)
Zotuluka 1- ZOKHUDZA 8 NC, C, NO, COM	12VDC mpaka 24VDC zotulutsa zowongolera zoyendetsedwa ndi 2.5A. Maximal3FDV - 10.0-13.2VDC 0 4.6A kapena 20.19-26.4VDC 0 5.2A. Maximal5FDV - 10.03-13.2VDC 0 8.6A. Maximal7FDV - 20.17-26.4VDC 0 9.2A. Fail-Safe [NC positive (+) & COM Negative (—)], Wolephera-Safe [PALIBE zabwino (+) & COM Negative (—)], Zowonjezera zowonjezera [C zabwino (+) & COM Negative (—)]. Mukamagwiritsa ntchito magetsi a AC polarity siyenera kuwonedwa. Ma Contacts akuwonetsedwa mosayambitsa.
Chithunzi cha FACP INTERFACE T, + INPUT -	Chiyankhulo cha Alamu ya Moto chimayambitsa kulowetsa kuchokera ku FACP. Zolowetsa zoyambitsa zimatha kutseguka, kawirikawiri amatsekedwa kuchokera ku FACP signing circuit linanena bungwe (Fig. 5-9, p. 11).
Chithunzi cha FACP INTERFACE NC, C, NO	Fomu ya "C" yolumikizirana idavotera @ 1A 28VDC kuti ifotokozere alamu.

Makhalidwe a Battery Oyimilira ndi Gulu la Power Supply Board:

Batiri	Mtengo wapatali wa magawo 3FDV	Mtengo wapatali wa magawo 5FDV	Mtengo wapatali wa magawo 7FDV
7H pa	10 Mphindi/6A	5 Mphindi/10A	5 Mphindi/10A
12H pa	30 Mphindi/6A	30 Mphindi/10A	30 Mphindi/10A
40H pa	Kupitilira maola 4/6A	Kupitilira maola 2/10A	Kupitilira maola 2/10A
65H pa	Kupitilira maola 4/6A	Kupitilira maola 4/10A	Kupitilira maola 4/10A

Power Supply Board Output Voltage Zokonda:

Fikirani Mphamvu Yowongolera Mphamvu Yachifaniziro (pa ACM8CB iliyonse):

Chithunzi cha 3 - Maximal3FDV, Maximal5FDV, ndi Maximal7FDV

CHENJEZO: Pamene gulu lamagetsi lakhazikitsidwa kwa 12VDC gwiritsani ntchito batri imodzi yokha (1) 12VDC yoyimirira.
Sungani mawaya opanda mphamvu osiyana ndi opanda mphamvu.
Gwiritsani ntchito mipata yochepera 0.25 ″.
12AH Mabatire omwe amatha kuchangidwanso ndi mabatire akulu kwambiri omwe amatha kulowa mchipindachi. Batire yakunja iyenera kugwiritsidwa ntchito ngati mukugwiritsa ntchito mabatire a 40AH kapena 65AH.

Zofunikira za NEC Power-Limited Wiring:

Mawaya amagetsi opanda mphamvu komanso opanda mphamvu ayenera kukhala olekanitsidwa mu nduna. Mawaya onse opanda mphamvu amayenera kukhala osachepera 0.25” kutali ndi mawaya aliwonse opanda mphamvu. Kuphatikiza apo, mawaya onse opanda mphamvu opanda mphamvu komanso ma waya opanda mphamvu opanda mphamvu ayenera kulowa ndikutuluka mu kabati kudzera munjira zosiyanasiyana.
Mmodzi wotero wakaleampza izi zikuwonetsedwa pansipa. Ntchito yanu yeniyeni ingafunike kugogoda kosiyana kosiyana kuti mugwiritse ntchito. Mabotolo aliwonse atha kugwiritsidwa ntchito. Pazinthu zopanda mphamvu kugwiritsa ntchito ngalande ndizosankha. Mawaya onse a m'munda ayenera kupangidwa pogwiritsa ntchito waya woyezera bwino wa CM kapena FPL (kapena cholowa m'malo chofanana).
Mpanda wa batire wa UL womwe ungasankhidwe uyenera kuyikidwa moyandikana ndi magetsi kudzera munjira zama waya za Gulu loyamba.
Kwa makhazikitsidwe aku Canada gwiritsani ntchito mawaya otetezedwa pamalumikizidwe onse.
Zindikirani: Onaninso zojambula zogwirira mawaya pansipa kuti mupeze njira yoyenera yoyika waya wa jekete wa CM kapena FPL (mkuyu 4a).

Zithunzi za FACP Hook-Up:

Chithunzi cha 5 Polarity reversal input kuchokera ku FACP signing circuit output (polarity imatchulidwa mu alarm):	Chithunzi 6 Nthawi zambiri Otsegula: Kulowetsa kwa FACP Kosagwirizana:
Chithunzi 7 Nthawi zambiri Tsegulani FACP Latching cholowetsa choyambitsa ndi kukonzanso (Kutulutsa uku sikunawunikidwe ndi UL):	Chithunzi 8 Chotsekedwa Nthawi Zonse: Zoyambitsa Zosatsegula za FACP:
Chithunzi 9 Chotsekeka Nthawi Zonse: Kuyika cholowetsa choyambitsa cha FACP ndikukhazikitsanso (Kutulutsa uku sikunawunikidwe ndi UL):

Miyeso Yampanda (H x W x D pafupifupi):
26" x 19" x 6.25" (660.4mm x 482.6mm x 158.8mm)

Altronix siwoyambitsa zolakwika zilizonse za typographical.
140 58th Street, Brooklyn, New York 11220 USA | foni: 718-567-8181 | | fax: 718-567-9056
webtsamba: www.kalit.com | | imelo: info@altronix.com | | Chitsimikizo cha moyo wonse
Mndandanda wa IIMaximal3FDV/5FDV/7FDV
H13U
Maximal3FDV/5FDV/7FDV Series (PTC) Upangiri Woyika

Zolemba / Zothandizira

Altronix Maximal7FDV Access Power Controllers [pdf] Buku la Malangizo Maximal7FDV Access Power Controllers, Maximal7FDV, Access Power Controllers, Power Controllers, Controllers

Maumboni

• Buku Logwiritsa Ntchito