Home Decorators Collection LED Vanity Use and Care Guide
Model #4151-NDM-18
Product Overview
This guide provides instructions for the installation, operation, care, and troubleshooting of the Home Decorators Collection LED Vanity light fixture.
Contact Information:
For questions, problems, or missing parts, please contact Home Decorators Collection Customer Service:
8 a.m. - 7 p.m., EST, Monday – Friday
9 a.m. – 6 p.m., EST, Saturday
Phone: 1-800-986-3460
Website: HOMEDEPOT.COM/HOMEDECORATORS
We appreciate your trust in Home Decorators Collection. Visit us online for our full line of home improvement products.
Safety Information
- Consult a qualified electrician for any electrical questions.
- This equipment complies with FCC Rules Part 15 for Class B digital devices, designed to provide reasonable protection against harmful interference in residential installations. It generates, uses, and can radiate radio frequency energy. If not installed and used per instructions, it may cause interference.
- If interference occurs, try these measures: Reorient or relocate the receiving antenna; Increase separation between equipment and receiver; Connect to a different circuit; Consult dealer or technician.
CAUTION: Inspect wire insulation for cuts, abrasions, or exposed copper. Do not attempt installation if a defect is found. Call Customer Service at 1-800-986-3460.
WARNING: Before starting installation or removing a previous fixture, disconnect power by turning off the circuit breaker or removing the fuse.
Warranty
This lighting fixture is warranted against defects in materials and workmanship for three (3) years from the date of purchase. This warranty applies to the original consumer purchaser for normal use and service.
The manufacturer's obligation is limited to repair or replacement at their discretion, provided the product has not been damaged by misuse, abuse, accident, modifications, alterations, neglect, or mishandling. It also does not apply to improperly installed, set-up, or used products. The warranty excludes failures due to accident, misuse, abuse, negligence, alteration, faulty installation, or issues not related to material or workmanship. Finish wear and tear is not covered.
The manufacturer disclaims any warranty of fitness for a particular purpose and is not liable for consequential or incidental loss or damage, including labor costs for repair or replacement.
Contact Customer Service at 1-800-986-3460 or visit www.homedepot.com/homedecorators.
Pre-Installation
Planning Installation
- Read all instructions before installation.
- This fixture can be installed as an up-light or a down-light.
- Assemble on a soft, non-abrasive surface (e.g., carpet or cardboard) to avoid damage.
- Keep your receipt and these instructions for proof of purchase.
Tools Required
- Ladder
- Safety goggles
- Electrical tape
- Phillips screwdriver
- Flat blade screwdriver
- Pliers
- Wire strippers
Hardware Included
Hardware not shown to actual size.
| Part | Description | Quantity |
|---|---|---|
| AA | Mounting bracket | 1 |
| BB | Mounting screw | 2 |
| CC | Wire nut | 3 |
| DD | Set screw (preinstalled) | 4 |
Package Contents
| Part | Description | Quantity |
|---|---|---|
| A | Light fixture | 1 |
Visual Description: The package contains one (1) LED vanity light fixture.
Installation
1. Attaching the mounting bracket to the junction box
- Remove the preinstalled set screws (DD) to separate the mounting unit (AA).
- Attach mounting unit (AA) to the junction box (not included) with mounting screws (BB).
Diagram Description: Shows the mounting bracket (AA) being attached to a junction box using mounting screws (BB). The set screws (DD) are shown removed from the bracket.
2. Making the electrical connections
- Connect the copper wire on the light fixture (A) to the mounting bracket (AA) using the preinstalled ground screw.
- Connect the wires: black wire to black (power), white wire to white (neutral), and copper wire to ground wire using wire nuts (CC). Secure with electrical tape (not included).
- NOTE: If fixture wires are the same color, connect the wire with markings or letters to the black (positive) wire and the other to the white (neutral) wire.
Diagram Description: Illustrates connecting the fixture wires to the house wiring using wire nuts (CC).
3. Secure the light fixture
- Place the light fixture (A) over the mounting unit (AA).
- Secure the fixture using the previously removed set screws (DD).
Diagram Description: Shows the light fixture (A) being mounted onto the bracket (AA) and secured in place with set screws (DD).
Operation
1. Turning the light on
- Turn the light switch on to activate the fixture.
Care and Cleaning
- Clean the lamp with a soft, dry cloth.
- Do not use cleaners containing chemicals, solvents, or harsh abrasives.
Troubleshooting
| Problem | Possible Cause | Possible Cause |
|---|---|---|
| The fuse blows or circuit breaker trips when the light is turned on. | The power is off. | Ensure the power supply is On. |
| There is a faulty wire connection. | Check the wiring. | |
| The circuit breaker is off. | Ensure the circuit breaker is in the ON position. | |
| There are crossed wires or the power wire is grounding out. | Check the wire connections. Contact a qualified electrician or call the Customer Service Team at 1-800-986-3460. |
