Aniston Vanity Light 3LT
Model#: HDL1005
Brand: Home Decorators Collection
Thank you for purchasing the Aniston Vanity Light 3LT from Home Decorators Collection. This document provides assembly instructions, safety information, warranty details, and troubleshooting tips.
For questions, problems, or missing parts, please contact Home Decorators Collection Customer Service:
Phone: 1-800-986-3460
Website: HOMEDEPOT.COM/HOMEDECORATORS, HOMEDEPOT.CA
Customer Service Hours: Monday - Friday, 8 a.m. - 7 p.m. EST; Saturday, 9 a.m. - 6 p.m. EST.
Safety Information
⚠️ INSTRUCTIONS
- Before starting installation or removal of a previous fixture, disconnect the power by turning off the circuit breaker or removing the fuse at the fuse box.
- Consult a qualified electrician if you have any electrical questions or need to replace the driver.
- For non-electrical questions, contact Customer Service at 1-800-986-3460 or visit HOMEDEPOT.COM/HOMEDECORATORS or HOMEDEPOT.CA.
⚠️ WARNING
Disconnect the power prior to removing or installing a light fixture.
Warranty
What is Covered
The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for five (5) years from the date of purchase. This warranty applies only to the original consumer purchaser and to products used in normal use and service. If the product is found to be defective, the manufacturer's obligation is repair or replacement at their discretion, provided the product has not been damaged through misuse, abuse, accident, modifications, alterations, neglect, or mishandling.
What is Not Covered
This warranty does not apply to products that have been improperly installed, set-up, or used contrary to instructions. It also does not cover failures due to accident, misuse, abuse, negligence, alteration, or faulty installation, or any failure not related to faulty material or workmanship. The warranty does not cover the finish on any portion of the product, such as surface weathering, which is considered normal wear and tear.
The manufacturer disclaims any warranty, expressed or implied, of fitness for a particular purpose. The manufacturer is not liable for any consequential or incidental loss or damage, including labor/expense costs involved in replacement or repair.
Contact Customer Service at 1-800-986-3460 or visit HOMEDEPOT.COM/HOMEDECORATORS or HOMEDEPOT.CA.
Pre-Installation
Planning Installation
Read all instructions before assembly and installation. Before starting installation or removal of a previous fixture, disconnect the power by turning off the circuit breaker or removing the fuse at the fuse box. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.
Tools Required
- Safety goggles [protective eyewear]
- Screw driver [tool for turning screws]
- Wire cutter [tool for cutting wires]
- Wire stripper [tool for removing wire insulation]
- Ladder [for reaching high places]
Package Contents
Part | Description | Quantity |
---|---|---|
A | Mounting plate | 1 |
B | Back plate | 1 |
C | Diffuser | 3 |
D | Nut | 3 |
E | Bulb (not supplied) | 3 |
AA | Twist-cap connector | 3 |
BB | Washer | 2 |
CC | Bolt | 2 |
DD | Bolt | 2 |
EE | Nut | 2 |
FF | Glove | 1 |
Installation
Note: Outlet box is not supplied.
- Connect the lamp's neutral (N) and live (L) wires to your own wires using the twist-cap connectors (AA).
- Fix the lamp's grounding wire to the mounting plate (A) by wrapping it around the grounding bolt, then tightening the grounding bolt. Connect the lamp's grounding wire to your main grounding wire with a twist-cap connector (AA).
- Safely stuff the wires inside your outlet box.
- Install the mounting plate (A) to your outlet box using washers (BB), bolts (CC / DD), and nuts (EE).
- Install the back plate (B) to the mounting plate (A) with the provided nuts. Tighten the nuts securely.
- Install the diffusers (C) onto the lamp using the nuts (D).
- Carefully install the bulbs (E) onto the lamp.
CAUTION: RISK OF FIRE. Use 3x MAX 60 Watt, TYPE A E26 incandescent lamps OR 3x MAX 7 Watt, TYPE A E26 LED lamps.
Consumer Responsibilities
Home Decorators Collection's lamps will remain beautiful for many years with proper care. The use of harsh abrasive cleansers is not recommended as they can damage the finish of your lamp.
Maintenance
- Never use abrasive cleaners, strong bleach, scrapers, metallic brushes, or other objects that can scratch or tarnish surfaces.
- Use a dry or slightly dampened clean cloth to wipe the surface of the fixture.
- Always disconnect power to the fixture by turning off the circuit breaker or removing the fuse at the fuse box before performing maintenance.
Troubleshooting
Problem | Correction |
---|---|
The light will not turn on. |
|
The fuse blows or circuit breaker trips when light is turned on. | Check the wire connections. |
For further assistance, please contact Home Decorators Collection Customer Service at 1-800-986-3460 or visit HOMEDEPOT.COM/HOMEDECORATORS or HOMEDEPOT.CA.
Retain this manual for future use.