Home Decorators Collection 54in Vanity

Safety Information

Please read and understand these instructions before assembling and using this console. Save these instructions for future reference.

Maximum Recommended Weight Loads

WARNING: Do not stand on the vanity. Use the vanity on level ground. The base of the vanity supports a maximum weight of 200 lbs. Exceeding this limit may compromise the structure and cause failure.

WARNING: Handle with care. Do not drop, handle roughly, or overtighten screws, as this can cause damage to the wood.

NOTICE: Observe local building and plumbing codes.

Diagram Description: An illustration of the vanity shows weight load limits. The top surface supports a maximum load of 200 lb (90.7 kg). Shelves support up to 30 lb (13.6 kg). The bottom base supports up to 15 lb (6.8 kg), and drawers support up to 10 lb (4.5 kg).

Warranty

Home Decorators Collection products are manufactured with superior quality standards and are backed by a 1-Year Manufacturer's warranty. Products are warranted to the original consumer purchaser to be free of defects in materials or workmanship. Defective products or parts will be replaced free of charge. Return the product/part to any Home Depot retail location or call 1-800-986-3460 for replacement. Proof of purchase (original sales receipt) is required for all warranty claims.

This warranty excludes incidental/consequential damages and failures due to misuse, abuse, or normal wear and tear. It does not apply to industrial, commercial, or business usage. Purchasers for such uses receive a five-year limited warranty from the date of purchase, with all other terms applying except the duration.

Some states and provinces may not allow limitations on incidental or consequential damages, so these limitations may not apply to you. This warranty grants specific legal rights, and you may have other rights that vary by state or province. Contact 1-800-986-3460 for more details.

Pre-Assembly

Tools Required

• Phillips screwdriver
• Silicone (for sealing)

Hardware Included

Note: Hardware not shown to actual size.

• AA: Door handle (Quantity: 2)
• BB: Door handle screw (Quantity: 4)
• CC: Drawer handle (Quantity: 9)
• DD: Drawer handle screw (Quantity: 18)

Package Contents

Diagram Description: An illustration of the vanity shows the main components labeled: A (Vanity Top), B (Vanity body), and C (Backsplash). Each is included in a quantity of 1.

Assembly

1. Water Supply Lines and Drain Installation Guide

Mark the wall for vanity placement and note the location of the water supply lines and drain on the back panel of the vanity. Move the vanity (B) into its proper place against the wall. Install the faucet, drain, and supply lines (not included) to the vanity top (A) according to the instructions provided with those items.

Diagram Description: Shows connecting water supply lines and a drain to the vanity top (A) and the back of the vanity body (B).

2. Handle Installation

Remove all handles (AA & CC) from the back of the doors and drawers. To remove drawers, pull out the buttons on the glides. Install all handles (AA & CC) onto the front of the doors and drawers.

Diagram Description: Illustrates attaching door handles (AA) to the vanity doors and drawer handles (CC) to the drawers using screws.

3. Adjustable Level

If your floor is uneven, adjust the floor levelers located at the bottom of the vanity by hand to correct tilting or to level the doors.

Diagram Description: Shows the bottom of the vanity with adjustable feet that can be turned to level the unit.

4. Vanity Top & Backsplash Installation

Apply a small bead of neutral silicone around the top perimeter of the vanity body (B). Carefully place the vanity top (A) onto the vanity body and press down to set it in place. To mount the backsplash (C) to the wall, apply a thin bead of silicone compound (not included) to the unpolished back side and bottom of the backsplash (C). Position the backsplash (C) onto the vanity top (A) and against the wall. Clean any excess silicone compound before allowing it to dry.

Diagram Description: Shows applying silicone to the vanity body (B), placing the vanity top (A), and then applying silicone to the backsplash (C) and attaching it to the vanity top (A) and wall.

5. Door Inter Panel Installation

The door panels are reversible. The doors are shipped with the flat panel facing the front. You can keep the doors as they are, or reverse the insert panel with the trim facing forward, depending on your desired configuration.

Diagram Description: Illustrates the process of removing and reinserting door panels, showing how to achieve different configurations by reversing the panel.

6. Vanity Drawer Removal

Removing the Drawer:

1. Unload the contents from the drawer.
2. Slide the drawer out as far as it will go.
3. Pull out the buttons on the glides and take out the drawer.

Replacing the Drawer:

1. Ensure the glides are unlocked, then align the installation hole on the drawer with the hook on the glides.
2. Place the drawer onto the glides and push the buttons to lock the drawer.
3. Push the drawer in completely.

Diagram Description: Shows the steps for removing a drawer by releasing the glide buttons and for reinserting it by aligning the drawer with the glides and engaging the buttons.

7. Hinge Adjustment For Door Alignment

If the doors pre-assembled to the vanity base require adjustment, follow these options as needed:

• To adjust the door up or down, loosen screws (a), adjust the door, and retighten screws.
• To adjust the door left or right, turn screw (b) in or out.
• To adjust the door in or out, loosen screws (c), adjust the door, and retighten screws.

Diagram Description: A close-up view of a cabinet hinge shows adjustment screws labeled 'a' (for up/down), 'b' (for left/right), and 'c' (for in/out).

Care and Maintenance

To protect your bath furniture, we suggest the following:

• Dust the vanity regularly with a soft, non-lint producing cloth or a household dusting product.
• Clean the vanity with a gentle, non-abrasive household cleaner. Immediately dry the wood with a soft cloth or towel.
• The marble top can be cleaned using standard marble cleaning agents (sold separately).
• Keep the product away from direct sunlight, as it may damage the finish.
• To prevent stains, clean all fluids from the stone surface immediately. It is strongly recommended to wipe red wine spills promptly to prevent permanent damage to the stone surface.

Caring for Wood Furniture

It is best to keep your furniture in a climate-controlled environment. Extreme temperature and humidity changes can cause fading, warping, shrinking, and splitting of wood. Keep furniture away from direct sunlight, as sun may damage the finish.

Proper care and cleaning at home will extend the life of your purchase and enhance its appearance as it ages.