Pixio PXC277A User Manual

Model: PXC277A

Pixio is a registered trademark of Pixio USA Inc. All other trademarks are owned by their respective owners.

Product Information

Product Name: 27in QHD VA 165Hz Gaming Monitor

Product Code: PXC277A

FCC ID: 2208151069EMC-1

FCC Compliance

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Connect with Pixio

Keep up to date on the latest news, take part in giveaways, and interact with us!

Sign up for our newsletter: www.pixiogaming.com

Join the Community:

Discord: https://discord.gg/pixio
Reddit: https://www.reddit.com/r/Pixio_Gaming

Important Safety Information

RISK OF ELECTRIC SHOCK DO NOT OPEN THE MONITOR. OPENING MONITOR BACK COVER WILL VOID YOUR WARRANTY.

⚡ This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.

ℹ️ This symbol alerts you that important literature concerning operation and maintenance has been included with this product.

Before Using the Product

Installation Space

Ensure adequate space around the product for ventilation. An internal temperature rise may cause fire and damage the product. Do not install near heaters or other high-temperature products or humidifiers.

⚠️ Do not place the monitor near heat sources, such as radiators, and do not expose the monitor to direct sunlight for an extended period of time.

Packaging: Make sure to keep the original packaging material for safe transport if needed.

Cleaning:

Use a soft, non-abrasive cloth. Do not use corrosive or strong detergents, as this may damage the panel and void the warranty.
Always unplug the power cord before cleaning.
Be careful when handling liquids to avoid irreparable damage to electrical components.

Placement:

Do not place the monitor near water sources (e.g., bathrooms, kitchens, humid areas).
Do not place the monitor on an unstable or uneven surface, as dropping it may cause injury.
When transporting, secure the monitor in an upright position, preferably in its original packaging.
When mounting, follow the instructions of the respective mounting provider.
Ensure ventilation openings are not covered. Avoid confined spaces like bookcases.
If the monitor will not be used for an extended period, unplug the power cord to prevent damage from lightning strikes or abnormal voltage incidents.
Do not overburden sockets to prevent fire or shock.
Do not insert foreign objects into the monitor.
Do not attempt to repair the monitor yourself; contact Pixio directly for RMA issues.

Adapter Warnings:

Take note of elevation and temperature zone warnings on the adapters.
The [200m altitude icon] icon indicates the adapter is suited for areas under 2000 meters.
The [non-tropical icon] icon indicates the adapter is suited for non-tropical areas.

Cleaning the Product

Power off the product and computer.
Disconnect the power cord. Hold the power cable by the plug; do not touch the cable with wet hands to avoid electric shock.
Wipe the monitor with a clean, soft, dry cloth. Do not use cleaning agents containing alcohol, solvent, or surfactant. Do not spray water or detergent directly on the product.
Wet a soft and dry cloth in water and wring thoroughly to clean the exterior.
Connect the power cord when cleaning is finished.
Power on the product and computer.

Notice: Characteristics of Crystal Display Monitors

Be aware that the following potential issues are within manufacturing tolerances and do not indicate a defect:

Screen flicker when first turning on; try turning it off and on again.
Uneven brightness levels on different images.
A possible 0.01% or less failure rate for dead or stuck pixels (effective pixel count is approximately 99.99%).
Image burn-in may occur if a single static image is displayed for a long period; this will gradually disappear, and turning off the monitor for an extended period can speed up the process.

If you experience extended, constant flickering or the screen goes black, please contact Pixio directly for assessment and repair. Do not attempt self-repair, as it will void the warranty.

Preparation

Product Includes:

Monitor
Stand
M4x16mm Screws
VESA Plate
DP Cable
Power Adapter

(Visuals of these items are depicted in the original document.)

Product Assembly

Assemble the stand base to the stand stem using two M4 x 16mm screws as shown in the illustration.
Gently place the product on a desktop or table with the provided curved foam still attached. Insert the assembled stand into the back of the monitor as shown in the illustration.

(Diagrams illustrate these steps.)

Product Disassembly

To remove the whole base:

Push the slider on the back cover.
Lift the base.
Take it out in the indicated direction.

(Diagrams illustrate these steps.)

Dimension & Weight

Dimensions:

Width: 611.3mm
Height: 462.4mm (max), 362.3mm (min)
Depth: 88mm (monitor body), 251.8mm (stand base)
VESA Mount: 100mm x 100mm

Net Weight: 3.8kg (8.38lb)

(Diagrams show front, side, and rear views with dimensions and VESA mount points.)

VESA Plate Installation

Remove the default stand.
Place the VESA Plate on top of the plastic cover area.
Install the VESA Mount using the provided VESA Screw set.

(Diagrams illustrate these steps.)

Monitor Inputs

The monitor features the following input ports:

1. DC: Power input.
2. USB: Firmware Update.
3. HDMI: HDMI 2.0, supports up to 144Hz, Adaptive Sync, HDR.
4. DP2: DisplayPort 1.2, supports up to 165Hz, Adaptive Sync, HDR.
5. DP1: DisplayPort 1.2, supports up to 165Hz, Adaptive Sync, HDR.
6. Earphone: Audio output.

*WARNING: Always use the appropriate power cord.

Control Panel & OSD Navigation

The monitor is controlled via a Jog Button, which is a multi-directional button that helps navigate the menus.

Menu Short Cut

Direction	Function
Up	Input selection Short Key
Down	Brightness Adjustment Short Key Menu
Left	Preset selection Short Key Menu
Right	Game Assist selection Short Key Menu

(Diagrams show the Jog Button and OSD menu shortcuts for Input, Preset, Game Assist, and Brightness.)

Main OSD Navigation

The On-Screen Display (OSD) menu allows for detailed configuration.

How to Reconfigure:

Action	Description
Up ⬆️	Move up the OSD Menu / Increase Value
Down ⬇️	Move down the OSD Menu / Decrease Value
Left ⬅️	Move left on the OSD Menu / Back
Right ➡️	Move right on the OSD Menu / Enter
Press	Turn ON / OFF the OSD Menu

To turn ON/OFF the OSD Menu, press the Jog Button.

To turn ON/OFF the Monitor, press and hold the Jog Button for more than 2 seconds.

(An OSD screenshot and navigation diagram are shown.)