Installation Instructions
HOGA-JW0222
Thank you for choosing Tribesigns. Your satisfaction is our priority. If you have any damages caused by shipping, feel free to contact support@tribesigns.com. Our friendly customer service will solve the problem for you.
Accessories
-
1
[Frame Piece]
-
2
[Frame Piece]
-
3
[Frame Piece]
-
4
[Frame Piece]
-
5
[Shelf Unit]
-
6
[Long Bar]
x2
-
7
[Long Bar]
x2
-
8
[Long Bar]
x1
-
9
[Medium Bar]
x1
-
10
[Medium Bar]
x1
-
11
[Short Bar]
x1
-
12
[Desktop Surface]
x1
-
13
[Desktop Surface]
x1
-
14
[Desktop Surface]
x1
-
15
[Desktop Surface]
x1
-
16
[Foot Pad]
x1
W-1
22pcs
6*35
W-2
11pcs
6*30
W-3
7pcs
6*20
W-4
4pcs
6*12
W-5
22pcs
4*14
W-6
8pcs
20*20
W-7
4pcs
[Bracket]
W-8
1pcs
[Bracket]
NOTES: Don't tighten screws completely at first, just in case parts were assembled wrong and need disassembled. Tighten screws at last when all parts are put together.
Assembly Steps
-
Step 1
Attach frame pieces (1) and (2) to the long bars (6) and (7) using screws W-1 and W-6. Attach the shelf unit (5) to the frame using W-1 and W-6 screws.
Diagram shows connecting vertical frame parts to horizontal bars and attaching the shelf unit.
-
Step 2
Continue assembling the frame by attaching more frame pieces (1, 2, 3) and long bars (5, 7) using screws W-1 and W-6.
Diagram shows further assembly of the desk frame and shelf unit.
-
Step 3
Attach the remaining frame pieces (4, 6, 7, 8) and bars (9, 10) using screws W-1 and W-6. Ensure the structure is stable.
Diagram illustrates connecting more frame components and bars to the main structure.
-
Step 4
Secure the frame using brackets (W-7) and screws (W-4, W-8). Attach brackets to the designated points on the frame.
Diagram shows the attachment of support brackets to reinforce the desk frame.
-
Step 5
Place the desktop surfaces (12 and 15) onto the frame. Secure them using screws W-2.
Diagram shows placing and screwing down the first two desktop pieces.
-
Step 6
Attach the next desktop surface (13) to the frame using screws W-2.
Diagram shows attaching the third desktop piece.
-
Step 7
Install the final desktop surface (14) using screws W-4 and W-5. Ensure it is properly aligned.
Diagram shows placing and securing the last desktop piece.
-
Step 8
Attach the remaining desktop surface (11) using screws W-3.
Diagram shows attaching the final desktop piece.
-
Step 9
Attach the foot pads (16) to the bottom of the desk legs using screws W-7 and W-5. Ensure all screws are tightened securely.
Diagram shows attaching the foot pads to the base of the desk.
Complete
For any issues or damages, please contact Tribesigns at support@tribesigns.com.
