NSW Fair Trading E-micromobility Vehicle Information

Product Identification and Compliance

Certificate Approval Number:

• Battery: OZC-250507-EA
• Bike: CBA250780

Compliance Standards:

• Battery: IEC 62133-2:2017
• Bike: AS 15194:2016

Serial Number: Located on the bike's frame near the handlebars. [See image description: The serial number is typically found on the frame, often near the headset or seat tube.]

Vehicle Specifications

• Maximum pedal assist speed: 25 km/hr ?
• Maximum continued rated power output: 250W ?
• Maximum weight: 120 KG

Local Laws and Usage Guidelines

Before using this vehicle, check the applicable local laws relating to your intended use on roads, footpaths, shared paths, bicycle lanes, and bicycle paths.

• For e-bikes: nsw.gov.au/e-bikes
• For e-scooters: nsw.gov.au/e-scooters
• For other vehicles: transport.nsw.gov.au/skateboards-scooters-rollerblades

Important Safety Instructions: Fire, Explosion, and Electric Shock

WARNING! Follow these safety instructions to reduce the risk of fire, explosion, and electric shock.

• Only use batteries and chargers supplied or recommended by the manufacturer.
• Battery Model Details: HCI-SILVER FISHD23610, HCI-SILVER FISHD23615, HCI-SILVER FISHD23620
• Charger Model Details: GPLC084V42-S, DPLC126V42-S
• Maximum Charging Times:
  • 2Ah charger / 10Ah battery: 6 hours
  • 3Ah charger / 15Ah battery: 6 hours
  • 3Ah charger / 20Ah battery: 8 hours
• Charge your vehicle and batteries in an open area away from combustible and highly flammable materials (e.g., beds, sofas, carpets).
• Store and charge your vehicle and batteries in a cool, dry place away from direct sunlight and doorways.
• Keep batteries away from moisture, heat, and impact.
• Allow batteries to cool before recharging or storing.

WARNING! Modifying or tampering with your vehicle can result in fire, explosion, or electric shock.

Do Not:

• Modify or tamper with any component of this vehicle.
• Leave charging batteries unattended or on charge overnight.
• Use or charge this vehicle if it is damaged.
• Charge this vehicle for more than the recommended charge time.
• Use or charge a damaged battery.
• Use batteries or vehicles that are overheating or showing signs of failure (e.g., swelling, leaking, venting gas).
• Buy or use a vehicle or battery that has been altered or modified.

Learn more about lithium-ion battery safety: nsw.gov.au/lithium-ion-battery-safety

Lithium-ion Battery Fire Hazards and Response

WARNING! Fires involving lithium-ion batteries can occur rapidly and be violent, involving toxic smoke and vapours, flames, and molten projectiles.

If your vehicle or battery emits sparks, smoke, or flames, evacuate the area and call Triple Zero (000). Close doors if safe to do so.

Warning signs include:

• Pungent odours
• Discolouration, blistering, bulging, or swelling of the casing
• Leaking electrolyte
• Heating up and becoming extremely hot to touch
• Abnormal popping, hissing, or crackling sounds, smoke, and fumes

Never touch a swollen or ruptured device or battery with bare hands.

Seek urgent medical assistance if anyone has been exposed to spilled electrolyte, flying debris, smoke, vapours, or flames.

Make sure you know what to do if your device or battery is smoking or on fire: fire.nsw.gov.au/batteries/what-to-do

Battery Separation and Disposal

For vehicles where the battery can be separated from the vehicle:

Safely separate your vehicle battery for disposal by following these instructions:

Battery Lock Mechanism:

The battery lock operates similarly to a car ignition lock with three positions:

• Position 1 (Remove Battery): All the way anti-clockwise. The battery is OFF and can be removed. Push the key IN when turning towards Position 2.
• Position 2 (OFF): Battery locked into the frame. Push the key IN when turning anti-clockwise to Position 1.
• Position 3 (ON): All the way clockwise. Battery locked into the frame.

Procedure:

1. First, unlock the battery (Position 1). Ensure the lock bolt has retracted fully and the opening in the battery rail is clear.
2. Hold the bike with one hand and the battery handle with the other. Give the battery a sharp tug to remove it from the rail. Brand new batteries may require a firm tug. Be careful not to injure yourself.

WARNING: Disconnect any power source and ensure the vehicle is safe before separating the battery.

For all vehicles: Disposal Instructions

WARNING: Do not dispose of this vehicle or its components in household or kerbside garbage bins. Check applicable local waste and disposal laws.

Learn how to safely dispose of your device and battery at: epa.nsw.gov.au/safe-battery-recycling

Other Important Safety Information

• It is important to read and understand the manual before riding the bike.
• It is recommended to use a local electric bike professional for assembly and regular servicing.
• Parents and guardians are responsible for the activities and safety of children. This bike is not designed to be used by children.
• Always wear a helmet that complies with your local safety standards.