Product Identification
- Brand: LEITNER
- Product name: Leitner SuperT
- Certificate approval number: Battery: OZC-250507-EA, Bike: CBA250780
- Compliance Standards: Battery: IEC 62133-2:2017, Bike: AS 15194:2016
- Serial Number: Follow image below. Image shows the front of the e-bike's frame where the serial number is located, typically near the handlebars or headset.
Vehicle Specifications
- Maximum pedal assist speed: 25km/hr
- Maximum continued rated power output: 250W
- Maximum weight: 120KG
Local Laws and Usage
Before using this vehicle, check the applicable local laws relating to your intended use of the vehicle on roads, footpaths, shared paths, bicycle lanes, and bicycle paths.
- E-bikes: nsw.gov.au/e-bikes
- E-scooters: nsw.gov.au/e-scooters
- Other vehicles: transport.nsw.gov.au/skateboards-scooters-rollerblades
General Safety Instructions
WARNING! Follow these safety instructions to reduce the risk of fire, explosion, and electric shock.
- Only use batteries and chargers supplied or recommended by the manufacturer.
- Battery model details and numbers: HCI-SILVER FISHD23610, HCI-SILVER FISHD23615, HCI-SILVER FISHD23620
- Charger model details and numbers: GPLC084V42-S, DPLC126V42-S
- Maximum charging times:
- 2Ah charger / 10Ah battery: 6 hours
- 3Ah charger / 15Ah battery: 6 hours
- 3Ah charger / 20Ah battery: 8 hours
- Charge your vehicle and batteries in an open area away from combustible and highly flammable materials, such as beds, sofas, and carpets.
- Store and charge your vehicle and batteries in a cool, dry place away from direct sunlight.
- Keep batteries away from moisture, heat, and impact.
- Allow time for batteries to cool before recharging or storing.
- Store and charge your vehicle and its batteries away from doorways.
WARNING! Modifying or tampering with your vehicle can result in a fire, explosion, or electric shock.
Don't:
- Modify or tamper with any component of this vehicle.
- Leave charging batteries unattended or on charge overnight.
- Use or charge this vehicle if it is damaged.
- Charge this vehicle for more than the recommended charge time.
- Use or charge a damaged battery.
- Use batteries or vehicles that are overheating or showing signs of failure, such as swelling, leaking, or venting gas.
- Buy or use a vehicle or battery that has been altered or modified.
Learn more about lithium-ion battery safety: nsw.gov.au/lithium-ion-battery-safety
Lithium-ion Battery Fire Safety
WARNING! Fires involving lithium-ion batteries can occur rapidly and can be violent, involving toxic smoke and vapours, flames, and molten projectiles.
If your vehicle or battery emits sparks, smoke, or flames, evacuate the area and call Triple Zero (000). Close doors if safe to do so.
Warning signs include:
- Pungent odours
- Discolouration, blistering, bulging, or swelling of the casing
- Leaking electrolyte
- Heating up and becoming extremely hot to touch
- Abnormal popping, hissing, or crackling sounds, smoke, and fumes
Never touch a swollen or ruptured device or battery with bare hands.
Seek urgent medical assistance if anyone has been exposed to spilled electrolyte, flying debris, smoke or vapours, or flames.
Make sure you know what to do if your device or battery is smoking or on fire: fire.nsw.gov.au/batteries/what-to-do
Battery Separation and Disposal
For vehicles where the battery can be separated from the vehicle
Safely separate your vehicle battery for disposal by following these instructions:
Diagram illustrates the battery lock mechanism with key positions. Components shown include: Fuse, Charge display, White button, Battery handle, Lock bolt (protruding through battery rail), Battery rail, and Key. The key has three positions: Position 1 (Remove battery, anti-clockwise), Position 2 (OFF, battery locked), and Position 3 (ON, battery locked, clockwise). It also shows the lock bolt retracting when the key is turned.
Key Positions:
- Position 1 (Remove battery): All the way anti-clockwise. Battery is OFF and can be removed. Push key IN when turning towards position 2.
- Position 2 (OFF): Battery locked into frame. Push key IN when turning anti-clockwise to Position 1.
- Position 3 (ON): All the way clockwise. Battery locked into frame.
Procedure: First unlock battery (Position 1) and make sure that the Lock bolt has retracted fully and that the opening in battery rail is clear. Then hold the bike with one hand, hold the battery handle with the other hand and give it a sharp tug. Brand new batteries may take a sharp tug to be removed from the rail. Be careful not to hurt yourself.
WARNING: Disconnect any power source and make sure it is safe before separating the battery.
For all vehicles
WARNING: Do not dispose of this vehicle or components of this vehicle in household or kerbside garbage bins. When disposing of this vehicle or components of this vehicle, check the applicable local waste and disposal laws.
Learn how to safely dispose of your device and battery at: epa.nsw.gov.au/safe-battery-recycling
Other Important Safety Information
- It is important to read and understand the manual before riding the bike.
- It is recommended to use a local electric bike professional to assemble and regularly service the bike.
- Parents and guardians are responsible for the activities and safety of children. This bike is not designed to be used by children.
- Always wear a helmet while riding which complies with your local safety standards.
Provider Information
- Business providing this information: LEITNER
- Publication date of document: 01/08/2025
