Ecler VEO-XPT44A 4K HDBaseT® EXTENDER

INDEX

1. Important Preliminary Notes
2. Important Safety Instructions
3. Important Note
4. Introduction
5. Package Contents
6. Description of Control Panels
7. Device Connection
8. Application Diagram
9. Technical Data

1. Important Preliminary Notes

CAUTION: RISK OF ELECTRIC SHOCK DO NOT OPEN

WARNING: SHOCK HAZARD - DO NOT OPEN

AVIS: RISQUE DE CHOC ÉLECTRIQUE - NE PAS OUVRIR

The lightning symbol with an arrow inside an equilateral triangle is intended to warn the user about non-isolated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to cause an electric shock to a person.

The exclamation mark in an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the accompanying documentation.

WARNING (if applicable): Connections marked with the symbol "⚡" may carry a risk of electric shock. External wiring connected to the terminals must be installed by qualified personnel or with pre-assembled cables.

WARNING: For fire and electric shock hazard, never expose the device to rain or moisture.

WARNING: A Class I device must be connected to a grounded power outlet.

2. Important Safety Instructions

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this device near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wider blade or the third prong is for your safety. If the provided plug does not fit into your outlet, consult an electrician to replace the obsolete outlet.
10. Do not damage the power cord. Avoid stepping on the power cord or pinching it, especially at the plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Use only attachments/accessories specified by the manufacturer.
12. Unplug this apparatus during lightning storms or when unused for long periods.
13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
14. Disconnecting from the mains: By switching off the POWER switch (13), all functions are stopped and the amplifier indicators will turn off. However, the device is only completely disconnected from the mains by pulling the power plug (11). Therefore, the power plug and socket must be easily accessible.
15. The device is connected to a grounded power outlet via a power cord.
16. The marking information is located on the bottom of the device.
17. The device must not be exposed to dripping or splashing, and no objects filled with liquids, such as vases, shall be placed on the device.

ATTENTION: This device has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when operated in a commercial environment. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this device in a residential area is likely to cause interference, in which case the user will be responsible for correcting the interference at their own expense.

WARNING: This product must not be disposed of as unsorted municipal waste under any circumstances. Take it to the nearest electrical and electronic equipment recycling center.

NEEC AUDIO BARCELONA, S.L. assumes no liability for damages that may arise to persons, animals, or objects due to non-compliance with the above warnings.

3. Important Note

Thank you for the trust you have placed in us by choosing our HDMI® HDbaseT® 18Gbps Extender Kit with Audio Extraction, VEO-XPT44A. To achieve optimal operability and performance, it is VERY IMPORTANT that you carefully read and consider the instructions in this manual before connecting the device.

For optimal device functionality, we recommend that maintenance be carried out exclusively by our authorized technical service partners.

All ECLER products come with a warranty. For warranty duration and conditions, please visit www.ecler.com or the warranty card included with the device.

4. Introduction

The VEO-XPT44A is a professional HDBaseT® extension kit that includes a transmitter and a receiver. It allows extending a 4K video signal up to 40 meters or a Full HD signal up to 70 meters over a single CAT 5e/6 cable. It supports 4K video signals at 60Hz with YUV 4:4:4 Chroma Subsampling and HDR10. The transmitter has a loop-through HDMI® output for local monitoring or daisy-chain connection. For easy integration, both the transmitter and the receiver feature an unbalanced stereo output with a Euroblock connector. Additionally, the VEO-XPT44A features bidirectional PoH, allowing the transmitter to be powered by the receiver and vice versa. Thanks to its compact design and the additional capabilities of RS-232 and bidirectional IR signals, it is the ideal solution for all applications requiring extension of AV and control signals.

4.1. Key Features

• Complete HDBaseT® Extender Kit, no settings required.
• Supports resolutions up to 4K at 60Hz YUV 4:4:4.
• Transmission range up to 70 meters for Full HD and up to 40 meters for 4K.
• Loop-through HDMI® output on the transmitter.
• Bidirectional IR and RS-232 signal pass-through.
• Bidirectional PoH (Receiver powered by TRANSMITTER or vice versa).
• PCM 2.0 Audio De-Embedding on TRANSMITTER and RECEIVER.
• Compatible with HDCP2.2/1.4.
• Supports HDR10 and 3D.
• ESD protection.

5. Package Contents

• 1 x Transmitter
• 1 x Receiver
• 1 x 24V DC Universal Power Supply (one supply for both devices)
• 2 x IR Blaster
• 2 x IR Receiver
• 4 x Euroblock connectors for RS-232 and audio cable connection

6. Description of Control Panels

6.1. Transmitter: Front and Rear Sides

6.2. Receiver: Front and Rear Sides

7. Device Connection

Please refer to the device connection diagram on the next page for details.

1. HDMI® Signal Sources (e.g., Blu-ray Player, STB, etc.): Connect these devices to the HDMI® input of the VEO-XPT44A transmitter.
2. HDMI® Displays (e.g., 4K or Full HD monitor or projector): Connect these devices to the HDMI® output of the VEO-XPT44A transmitter.
3. IR Blaster: Connect this to the IR-Out port of the VEO-XPT44A transmitter and/or receiver.
4. IR Receiver: Connect this to the IR-In port of the VEO-XPT44A transmitter and/or receiver.

Diagram Description:

The diagram shows a typical setup. A DVD or Blu-ray player connects to the transmitter's HDMI input. An IR Blaster connects to the transmitter's IR Out. A TV or monitor connects to the transmitter's HDMI Out (loop-through). The transmitter also has connections for RS-232 and audio. The receiver connects to the transmitter via a CAT5e/6/7 cable. The receiver has an HDMI output for a TV or monitor, and IR input/output connections. Power supplies are connected to both the transmitter and receiver, though only one is needed to power both.

Note: Please be careful when inserting or removing HDMI® cables.

8. Application Diagram

Diagram showing the physical layout and connections of the VEO-XPT44A transmitter and receiver units, including dimensions and port labels.

9. Technical Data

VEO-XPT44A

Video Performances

Audio Performances

Control

General

Environmental

Power Supply

Mechanical