Ecler VEO-XPT44A 4K HDMI over HDBaseT Extender Kit

Important Notes and Safety Instructions

Important Remark: This section contains important safety information regarding electrical hazards and operational precautions. Always follow the provided warnings and instructions to prevent risks of electric shock and ensure proper usage.

Safety Instructions: Read and keep all instructions. Pay attention to all warnings. Do not use the device near water. Clean only with a dry cloth. Do not block ventilation openings. Install according to manufacturer instructions. Avoid heat sources. Do not defeat safety features of the plug. Avoid damaging the power cord. Use only specified attachments. Unplug during storms or prolonged non-use. Refer servicing to qualified personnel. Ensure proper power disconnection. Do not expose to dripping or splashing, and do not place liquid-filled objects on the unit.

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at their own expense.

WARNING: This product must not be disposed of with unsorted household waste. Return it to the nearest electrical and electronic waste treatment center.

NEEC AUDIO BARCELONA, S.L. disclaims all responsibility for damages that may be caused to persons, animals, or objects due to non-compliance with the above warnings.

Introduction

Thank you for choosing the Ecler VEO-XPT44A Kit, a professional 4K HDMI extender kit over HDBaseT® with 18Gbps and audio extraction. It is crucial to read and understand this user manual thoroughly before connecting the device to optimize its use and performance.

For optimal operation, maintenance should be performed by authorized technical services. Ecler products come with a warranty; refer to www.ecler.com or the included warranty card for details.

Main Features:

• Complete HDBaseT® extender kit, no configuration required.
• Supports resolutions up to 4K @ 60 Hz, YUV 4:4:4.
• Transmission distance up to 70 meters for Full HD and 40 meters for 4K.
• HDMI® loop-out on the transmitter.
• Bi-directional IR and RS-232 pass-through.
• Bi-directional PoH (Power over HDBaseT®) power supply (transmitter powered by receiver or vice versa).
• PCM 2.0 audio extraction on both transmitter and receiver.
• HDCP2.2/1.4 compliant.
• Supports HDR10 and 3D content.
• Electrostatic discharge (ESD) protection.

Package Contents

• 1 Transmitter
• 1 Receiver
• 1 International 24V DC power adapter (one power supply for both units)
• 2 IR emitters
• 2 IR receivers
• 4 Euroblock connectors for RS-232 and audio cable termination

Front and Rear Panel Descriptions

Transmitter:

Front Panel:

• 1. HDMI® Input
• 2. HDMI® Loop-out Output
• 3. IR Receiver
• 4. IR Emitter
• 5. 24V DC Power Connector

Rear Panel:

• 6. USB Port (for firmware updates)
• 7. RS-232 Port
• 8. Audio Extraction Port
• 9. EDID Mode Selector: Auto (default 4K@60Hz), Local (copies EDID from connected display), Remote (copies EDID from receiver-connected display)
• 10. Reset Button
• 11. HDBaseT® Output on Cat5e/6/7

Receiver:

Front Panel:

• 1. HDMI® Output
• 2. IR Receiver
• 3. IR Emitter
• 4. 24V DC Power Connector

Rear Panel:

• 5. USB Port (for firmware updates)
• 6. RS-232 Port
• 7. Audio Extraction Port
• 8. Reset Button
• 9. HDBaseT® Input on Cat5e/6/7

Connecting the Devices

Refer to the connection diagram for detailed instructions.

1. HDMI® Sources: Connect devices like Blu-Ray players, TV decoders, etc., to the HDMI® input of the VEO-XPT44A transmitter.
2. HDMI® Displays: Connect displays such as 4K or Full HD screens or projectors to the HDMI® output of the VEO-XPT44A transmitter.
3. IR Emitter: Connect to the IR Out port of the transmitter and/or receiver.
4. IR Receiver: Connect to the IR In port of the transmitter and/or receiver.
5. RS-232 Sources and Termination Points: Connect PCs, serial controllers, etc., to the RS-232 ports via Euroblock.
6. Amplifiers or Audio Devices: Connect to the audio ports on the transmitter and/or receiver.
7. Transmitter and Receiver Connection: Connect a CAT.5e/6a/7 cable between the RJ45 output of the transmitter and the RJ45 input of the receiver.
8. Power Up: Connect the 24V DC power supply to either the transmitter or the receiver. Only one unit needs to be connected to the mains for both to function.

Note: Please connect/disconnect HDMI® cables gently.

Connection Diagram Description: The diagram illustrates a typical setup with a DVD or Blu-ray player connected to the transmitter's HDMI input, and a TV or monitor connected to the transmitter's HDMI loop-out. An IR Blaster and IR Extender are shown connected to the respective ports. Amplifiers and RS-232 devices are also depicted with their connections. The receiver unit is shown connected to a TV or monitor via HDMI output, with IR Blaster and IR Extender connections, and receiving the HDBaseT signal via CAT cable.

Dimensional Drawings

The document includes dimensional drawings of the transmitter and receiver units, showing port locations and overall dimensions in millimeters and inches.

Technical Specifications

VEO-XPT44A

Video Performances

• Supported Resolutions: 480i, 480p, 720i, 720p, 1080i, 1080p up to 60Hz, 1200p up to 25/30Hz, 4K up to 60Hz.
• Colour Space: RGB, YCbCr
• Chroma Subsampling: 4:4:4, 4:2:2, 4:2:0
• Colour Depth: 8-bit, 10-bit, 12-bit, 16-bit only @4K30
• HDR: HDR10
• Signal Bandwidth: 18 Gbps
• HDCP: 2.2 compliant
• Video Connectors: Transmitter: Type-A Female HDMI® Input/Output. Receiver: Type-A Female HDMI® Output.

Audio Performances

• Audio Formats: Dolby True-HD, DTS-HD Master Audio, PCM.
• Sample Rate: 32 KHz, 44.1 KHz, 48 KHz, 88.2 KHz, 96 KHz, 176.4 KHz, 192 KHz.
• Bit depth: Up to 24-bit.
• Frequency Response: 20Hz-20KHz, ±3dB.
• Audio Output Connectors: 1 x 3-pin Euroblock for Stereo Unbalanced Output (PCM 2.0) for both TRANSMITTER and RECEIVER.

Control

• EDID mode: 3-positions EDID mode selector.
• LED indication: Green LED: HDbaseT® connection OK. Orange LED flashing: HDCP negotiation. Orange LED fixed: HDCP encryption.

General

• HDMI® Distance: Up to 10 meters / 33 ft with Ecler VEO cables.
• Cat.5e/6 Distance: CAT5e/6 @ 4K up to 35 m / 115 feet; CAT6a/7 @ 4K up to 40 m / 130 feet; CAT5e/6 @ 1080p up to 60 m / 197 feet; CAT6a/7 @ 1080p up to 70 m / 230 feet.

Environmental

• Operation Temperature: -10 to +50°C (14 to +122 °F).
• Humidity: 5-90% RH (no condensation).

Power Supply

• Mains voltage: AC 100V ~ 240V 50/60Hz.
• Output: DC 24V --- 1A.
• Rated power consumption: Max 12W.

Mechanical

• Dimensions: 154.4mm × 78.3mm × 20mm (6.08" x 3.08" x 0.79").
• Weight: 688g / 1.52lbs (Pair).

Product Variations and Modifications

All product characteristics are subject to change due to manufacturing tolerances. NEEC AUDIO BARCELONA S.L. reserves the right to make modifications or improvements to the design or manufacturing that may affect the characteristics of this product.

For technical questions, please contact your supplier, distributor, or fill out the contact form on the Ecler website under Support / Technical requests.

Address: Motors, 166-168, 08038 Barcelona, Spain. Phone: (+34) 932238403. Email: information@ecler.com. Website: www.ecler.com.