Ecler VEO-XPT44A 4K HDBaseT Extender Kit

Important Warnings

WARNING: SHOCK HAZARD - DO NOT OPEN

The lightning bolt symbol within an equilateral triangle alerts users to the presence of dangerous, uninsulated voltage within the apparatus that may pose an electric shock hazard.

The exclamation mark symbol within an equilateral triangle alerts users to important operating and maintenance instructions accompanying the product.

WARNING (If applicable): Terminals marked with the lightning bolt symbol may carry a sufficient magnitude to constitute an electric shock hazard. External wiring connected to these terminals must be installed by qualified personnel or use pre-made cables.

WARNING: To prevent electrical shocks or fire hazards, do not expose this equipment to rain or humidity.

WARNING: Class I construction apparatus must be connected via a grounded plug.

Important Safety Instructions

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near heat sources such as radiators, heat registers, stoves, or other heat-producing apparatus, including amplifiers.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades, one wider than the other. A grounding-type plug has two blades and a third grounding prong. The third prong is for your safety. If the provided plug does not fit your outlet, consult an electrician to replace the obsolete outlet.
10. Protect the power cord from being walked on or pinched, especially at the plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Use only attachments specified by the manufacturer.
12. Unplug this apparatus during lightning storms or when unused for long periods.
13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
14. Disconnecting from the mains: turning off the POWER switch will stop all functions and indicators, but complete disconnection is achieved by unplugging the power cord from its connector. Ensure this connector is easily accessible.
15. The equipment connects to a grounded outlet via the power cord.
16. Part of the product labeling is located on the bottom of the unit.
17. This apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be responsible for correcting the interference at their own expense.

WARNING: This product must not be disposed of as unsorted municipal waste. Please take it to the nearest electrical and electronic waste treatment center.

NEEC AUDIO BARCELONA, S.L. disclaims any responsibility for damages that may occur to persons, animals, or objects due to non-compliance with the above warnings.

Important Note

Thank you for choosing our Ecler HDMI® HDBaseT® 18Gbps Extender Kit with Audio De-embedder, VEO-XPT44A!

For maximum operability and performance, it is VERY IMPORTANT to read and carefully consider the specifications in this manual before connecting the device.

For optimal performance, we recommend that maintenance be carried out by authorized Ecler Technical Services.

All Ecler products have a warranty. Please visit www.ecler.com or the warranty card included with this unit for warranty period and conditions.

Introduction

The VEO-XPT44A is a professional HDBaseT® extension kit that includes a transmitter and a receiver. It allows extending a 4K video signal up to 40m or a Full HD signal up to 70m using a single Cat 5e/6 cable. It offers support for 4K@60Hz, 4:4:4 YUV, and HDR10. The transmitter features an auxiliary HDMI® output for monitoring or cascading to other devices. It also incorporates a stereo unbalanced audio output with an Euroblock connector on both the transmitter and receiver for complete integration. Furthermore, the VEO-XPT44A can be powered via the CAT 5e/6 cable bidirectionally using the PoH function, allowing the transmitter to power the receiver or vice versa. With its compact format and ability to transport RS-232 and IR signals, this kit is an excellent solution for AV extension and control data applications.

Key Features

• Complete HDBaseT® extension kit, no adjustments needed.
• Supports resolutions up to 4K@60Hz, YUV, 4:4:4.
• Transmission distance up to 70 meters for Full HD and up to 40 meters for 4K.
• Auxiliary HDMI® output on the transmitter.
• Bidirectional PoH power supply (Transmitter powers receiver or vice versa).
• Bidirectional IR and RS-232 pass-through.
• PCM 2.0 audio extraction on both transmitter and receiver.
• Compatible with HDCP 1.4/22.
• Supports HDR10 and 3D.
• ESD protection.

Package Contents

• 1 x Transmitter.
• 1 x Receiver.
• 1 x International 24VDC Power Supply (One for both units).
• 2 x IR Emitter.
• 2 x IR Receiver.
• 4 x Euroblock connectors for RS-232 and audio cable terminations.

Panel Description

6.1. Transmitter: Front and Rear Panels

Front Panel:

• 1. HDMI In: HDMI input connector.
• 2. HDMI Out: Auxiliary HDMI output connector.
• 3. IR Out: IR output connector.
• 4. IR In: IR input connector.
• 5. DC/24V: 24V DC power port.

Rear Panel:

• 6. USB Port: Reserved for firmware updates.
• 7. RS-232: RS-232 port.
• 8. Audio Output: De-embedded audio output connector.
• 9. EDID Selector:
• Auto: 4K@60Hz by default.
• Local: Copies EDID data from the display connected to the transmitter.
• Remote: Copies EDID data from the display connected to the receiver.
• 10. Reset Button: Reset button.
• 11. CAT5e/6 HDBaseT® Output: CAT5e/6/7 HDBaseT® output connector.

6.2. Receiver: Front and Rear Panels

Front Panel:

• 1. HDMI Out: HDMI output connector.
• 2. IR Out: IR output connector.
• 3. IR In: IR input connector.
• 4. DC/24V: 24V DC power port.

Rear Panel:

• 5. USB Port: Reserved for firmware updates.
• 6. RS-232: RS-232 port.
• 7. Audio Output: De-embedded audio output connector.
• 8. Reset Button: Reset button.
• 9. CAT5e/6 HDBaseT® Input: CAT5e/6/7 HDBaseT® input connector.

Connections

Refer to the connection diagram for different devices on the following page.

1. HDMI Input Signal: From video sources (e.g., Blu-ray players, STBs, etc.), connect the HDMI device to the VEO-XPT44A transmitter.
2. HDMI Destination Devices: For HDMI destination devices (4K or Full HD displays or projectors), connect them to the HDMI output of the transmitter/receiver VEO-XPT44A.
3. IR Emitter: Connect the IR emitter to the IR-Out connector of the transmitter/receiver VEO-XPT44A.
4. IR Receiver: Connect the IR receiver to the IR-In connector of the transmitter/receiver VEO-XPT44A.

Diagram showing IR Blaster and IR Receiver connections:

IR Blaster:

• 1. IR Signal
• 2. Power
• 3. NC

IR Receiver:

• 1. IR Signal
• 2. Power
• 3. Grounding

5. RS-232: For RS-232 devices at the source and destination (computers, serial controllers, etc.), connect the devices to the RS-232 Euroblock ports.

6. Audio Amplifier or Device: Connect audio devices to the audio extraction connector of the VEO-XPT44A transmitter/receiver.

7. Transmitter and Receiver: Connect the transmitter and receiver using a CAT 5e/6 cable to the HDBaseT® input and output RJ45 connectors of the receiver and transmitter, respectively.

8. Power Up: Connect the 24V DC power supply to either the transmitter or the receiver VEO-XPT44A. Note that only one of the two units needs to be connected to the power outlet for both to function.

Note: Insert and remove HDMI cables with care.

Connection Diagram:

A diagram illustrates the connection of a DVD or Blu-ray player, IR Blaster, IR Extender, TV or Monitor, Amplifier, and RS-232 equipped PC or Notebook to the VEO-XPT44A Transmitter and Receiver units. The diagram shows the flow of HDMI, IR, RS-232, and power signals between these components.

Mechanical Diagram

The mechanical diagram shows the physical dimensions and layout of the VEO-XPT44A transmitter and receiver units. It includes views of the front, top, and rear panels, highlighting the location of connectors and ports. Dimensions are provided in millimeters.

Technical Specifications

VEO-XPT44A

Video Performances

Audio Performances

Control

General

Environmental

Power Supply

Mechanical

Product Variations and Disclaimers

All product characteristics are subject to variation due to production tolerances.

NEEC AUDIO BARCELONA, S.L. reserves the right to make changes or improvements in design or manufacturing that may affect the specifications of this product.

For technical inquiries, please contact your supplier, distributor, or complete the contact form on our website under Support / Technical Consultation.

NEEC AUDIO BARCELONA, S.L.
Motors, 166-168
08038 Barcelona - Spain
(+34) 932238403
information@ecler.com
www.ecler.com