IKEA TONSTAD Chair
Assembly Instructions
Parts List
- 1x Allen key (111631)
- 3x Screw (10130167)
- 12x Screw (10130168)
Assembly Steps
-
Step 1
Attach the first leg to the chair seat using two screws (10130168) and the Allen key (111631). Ensure the leg is oriented correctly as shown in the diagram. Repeat for the remaining three legs.
Diagram Description: Shows a person attaching a leg to the underside of the chair seat using screws and an Allen key. Close-up view highlights the screw insertion and tightening.
-
Step 2
Secure the legs to the chair frame. Insert screws (10130168) through the designated holes in the leg mounting plates and into the chair frame. Tighten with the Allen key (111631).
Diagram Description: Shows the chair frame with all four legs attached. A close-up illustrates the process of screwing the legs into the frame.
-
Step 3
Attach the backrest support. Use three screws (10130167) and the Allen key (111631) to secure the backrest support bracket to the chair frame.
Diagram Description: Shows the backrest support being attached to the chair frame using screws and the Allen key.
-
Step 4
Flip the chair upright onto its legs. Ensure it is stable.
Diagram Description: Shows a person carefully flipping the assembled chair onto its legs.
-
Step 5
Place the seat cushion onto the chair seat. Ensure it is positioned correctly.
Diagram Description: Shows a person placing a seat cushion onto the chair.
-
Step 6
Drape the backrest cover over the backrest. Adjust it to fit snugly.
Diagram Description: Shows a person draping a fabric cover over the backrest of the chair and adjusting it.
-
Step 7
Secure the seat cushion and backrest cover. There are likely fasteners or straps to secure these components. Follow the diagram for specific attachment points.
Diagram Description: Shows a close-up of hands securing the seat cushion and backrest cover, possibly with straps or clips.
