IKEA TONSTAD Chair Assembly Instructions

Parts Included

• 1x Allen key (111631)
• 3x Screw (10123849)
• 12x Screw (152548)

Assembly Steps

1. Step 1

   Attach the base plate to the seat. Insert two screws (152548) through the base plate and into the seat. Tighten with the Allen key (111631). Repeat for the other side.

   Diagram shows attaching a base plate with screws using an Allen key. An inset shows a close-up of the screw being tightened, with a 'correct' symbol next to it and an 'incorrect' symbol with a cross next to it.

2. Step 2

   Attach the legs to the base plate. Insert two screws (152548) through the base plate and into each leg. Tighten with the Allen key (111631).

   Diagram shows attaching chair legs to the base plate using screws and an Allen key.

3. Step 3

   Attach the seat to the frame. Insert one screw (10123849) through the frame and into the seat. Tighten with the Allen key (111631).

   Diagram shows attaching the seat to the chair frame using a screw and an Allen key.

4. Step 4

   Turn the chair upright.

   Diagram shows a person carefully turning the assembled chair upright.

5. Step 5

   Place the seat cushion onto the chair.

   Diagram shows a person placing a seat cushion onto the chair.

6. Step 6

   Adjust the seat cushion for a proper fit.

   Diagram shows a person adjusting the seat cushion on the chair, with arrows indicating movement.

7. Step 7

   Secure the seat cushion. Ensure all parts are firmly attached.

   Diagram shows hands securing the seat cushion, with arrows indicating a tightening or securing motion.