TONSTAD Chair Assembly Instructions
Brand: IKEA
Parts List
- 1x Allen key (Part No: 111631)
- 3x Bolt (Part No: 10130167)
- 12x Screw (Part No: 10130168)
Important Notes Before Assembly:
- Assemble on a soft surface like a rug to protect the floor and parts. ?️
- Do not use incorrect parts or tools. ❌
- Check all parts before assembly. ❓
- Refer to IKEA for assistance if needed. ?
Assembly Steps
Step 1: Attach First Two Legs
Align two legs with the designated holes on the underside of the seat base. Use the Allen key (111631) to insert and tighten two screws (10130168) per leg. Ensure correct leg orientation.
Step 2: Attach Remaining Legs
Repeat the process from Step 1 to attach the remaining two legs to the seat base, using the Allen key (111631) and screws (10130168).
Step 3: Attach Backrest Support
Align the backrest support with the corresponding holes on the seat base. Use the Allen key (111631) to insert and tighten one bolt (10130167) into each of the three designated points.
Step 4: Turn Chair Upright
Carefully turn the assembled chair upright onto its legs. ?
Step 5: Place Seat Cushion/Cover
Place the fabric seat cushion or cover onto the chair seat.
Step 6: Adjust Seat Cushion/Cover
Adjust and secure the seat cushion or cover, ensuring it fits snugly. ↔️
Step 7: Final Checks
Ensure all parts are securely fastened. If applicable, attach protective pads to the bottom of the legs. Remove any protective tape. ✔️
