Ashley Furniture D383-325 Dining Set Assembly Instructions
Model Number: D383-325
Important Safety Information
READ CAREFULLY BEFORE BEGINNING ASSEMBLY!
- Always use proper tools.
- Follow the assembly steps in order. Do not skip any steps.
- Check all packing materials carefully for small parts that may have come loose. If parts are missing, contact the retailer. DO NOT USE SUBSTITUTE PARTS.
- Periodically check to ensure all connectors [bolts, screws, etc.] are tight.
- Keep instructions for future reference.
- Be very careful when handling glass or mirrors, as severe injury may result if they break. Never handle large pieces of glass or mirrors alone.
- When assembling products with electrical cords [lamps, lights, etc.], always ensure the cord is unplugged before assembly and be careful not to twist the cord during assembly.
- When assembling shelves or entertainment centers, do not stand on lower shelves to assemble upper shelves; use a step ladder.
- Do not stand on tables [end tables, coffee tables, dining tables], as they are not designed to support a person's weight.
- If assembly instructions state that two or more people are required, do not attempt by yourself, as there is a risk of injury.
Note: Ashley Furniture Industries, Inc. disclaims any liability for damages or injuries which may occur due to failure to properly follow assembly instructions, properly assemble the product, or properly use the product.
Note: Your unit may look different in appearance from the one shown in the illustrations on this instruction sheet.
Parts List
| Identifier | Description | Quantity |
|---|---|---|
| A | Table Top Frame / Chair Frame | 1 (Table), 1 (Chair) |
| B | Table Legs / Seat Cushion | 4 (Table Legs), 1 (Seat Cushion) |
| C | Bolt (5/16"x70mm) / Bolt (1/4"x80mm) | 8 (Table), 4 (Chair) |
| D | Bolt (1/4"x38mm) / Washer (5/16") | 2 (Chair), 8 (Table) |
| E | Bolt (1/4"x65mm) / Washer (5/16") | 8 (Chair), 8 (Table) |
| F | Allen Wrench [M4] / Washer (1/4") | 1 (Table), 10 (Chair) |
| G | Nut (1/4") | 2 (Chair) |
| H | Allen Wrench [M4] | 1 (Chair) |
| J | Washer (1/4") | 10 (Chair) |
| K | Screw [10x25mm] | 1 (Chair) |
Note: Part identifiers and descriptions may vary slightly between table and chair assembly. Specific quantities are detailed in the steps.
Table Assembly
General Note: Unit should be assembled by two or more people. Do not tighten any bolts until all bolts have been started.
Step 1: Attach Legs to Table Frame
Place the table top frame [A] upside down on a protected surface. Attach each of the four table legs [B] to the corners of the frame. Use bolts [C] and washers [E] for each leg. Secure with the provided allen wrench [F].
Diagram Description: Shows the rectangular table frame [A] upside down. Four legs [B] are positioned at the corners. Bolts [C] and washers [E] are shown being inserted through the frame into the legs, with the allen wrench [F] ready to tighten. A magnified view shows the connection detail with parts C, E, and F.
Step 2: Final Tightening
Once all legs are attached and the table is upright, ensure it is level. Tighten all bolts securely using the allen wrench.
Diagram Description: Shows the assembled table standing upright. An arrow indicates a tightening motion with an allen wrench.
Chair Assembly
General Note: Each chair requires assembly. Follow steps carefully.
Step 1: Attach Seat Cushion to Frame
Take one chair frame [A] and the seat cushion [B]. Align the seat cushion with the mounting points on the chair frame. Secure the cushion using bolts [E], washers [F], and nuts [G]. Use the allen wrench [H] to tighten.
Diagram Description: Shows a chair frame [A] and a seat cushion [B]. Bolts [E], washers [F], and nuts [G] are shown being used to attach the cushion to the frame. The allen wrench [H] is depicted. A magnified view shows the connection detail with parts E, F, G, and H.
Step 2: Attach Back Legs
Attach the back legs to the assembled seat frame. Use bolts [C], washers [J], and nuts [implied]. Tighten with the allen wrench [H].
Diagram Description: Shows the partially assembled chair frame with the seat cushion attached. Back legs are being attached to the rear of the seat frame using bolts [C], washers [J], and nuts. The allen wrench [H] is shown. A magnified view shows the connection detail.
Step 3: Attach Front Legs
Attach the front legs to the assembled seat frame. Use bolts [D], washers [J], and nuts [implied]. Tighten with the allen wrench [H].
Diagram Description: Shows the partially assembled chair frame with the seat cushion and back legs attached. Front legs are being attached to the front of the seat frame using bolts [D], washers [J], and nuts. The allen wrench [H] is shown. A magnified view shows the connection detail.
Step 4: Final Tightening and Leveling
Ensure the chair is level on the floor. Tighten all bolts securely using the allen wrench.
Diagram Description: Shows a completed chair. An arrow indicates a tightening motion with an allen wrench.
Final Notes
Periodically check and tighten all bolts and screws to ensure the stability and longevity of your furniture.
Note: The appearance of your unit may differ slightly from the illustrations provided.
