Contact Us:
If you have any questions about the installation of YITAHOME products, please contact us at:
Phone: +1 (888) 717-8084 (Monday-Friday 8:00 AM - 4:30 PM PST / Saturday 8:00 AM - 12:00 PM PST)
Email: after-sale.cs@hotmail.com
Alternative contact for Amazon.com orders only:
- Log into your Amazon account.
- Go to "Your Orders" and find the purchase.
- Click on "Contact Seller".
Product: PATIO TABLE
Notice:
- Follow the installation instructions carefully. Please confirm all accessories are present before installation.
- Do not fully tighten the screws during initial assembly. Fully tighten screws only once all pieces are correctly assembled.
- If you encounter any problems during installation, please contact our customer service.
Parts List
| Item No. | Reference Image Description | Quantity |
|---|---|---|
| A | Screw (M6x12) ? | x16 |
| 1 | Tabletop ?️ | x1 |
| 2 | Hardware Set (Washers/Nuts) ⚙️ | 4 Sets |
| 3 | Leg Assembly Part | x1 |
| 4 | Support Structure | x1 |
| 5 | Screwdriver ? | 1 Set |
Diagrams show individual parts and quantities required for assembly.
Assembly Steps
Step 1: Part 1 Finished
This step shows the initial assembly of the table legs to the tabletop. The tabletop (1) is shown with three leg assemblies (3) attached to its underside, secured by screws (A).
Visual representation of the first stage of assembly, indicating the tabletop with attached legs.
Required Parts: Tabletop (1), Leg Assembly Parts (3), Screws (A), Screwdriver (5).
Step 2: Attaching Legs to Tabletop
Attach the four leg assemblies (3) to the underside of the tabletop (1) using the screws (A). Ensure each leg assembly is securely fastened.
Diagram shows the tabletop upside down, with leg assemblies being attached using screws.
Required Parts: Tabletop (1), Leg Assembly Parts (3) x4, Screws (A) x16, Screwdriver (5).
Step 3: Attaching Support Structure
Connect the support structure (4) between the legs of the table. Use the hardware sets (2) (washers/nuts) to secure the support structure to the legs.
Diagram illustrates the support structure being fitted between the table legs and secured with hardware.
Notice: You can choose whether to install the optional cup holders/ashtrays (associated with hardware set 2) or not.
Required Parts: Partially assembled table, Support Structure (4), Hardware Sets (2) x4.
Step 4: Final Tightening and Completion
Complete the assembly by ensuring all screws and connections are fully tightened. The support structure (4) is secured to the legs using the hardware (2).
Diagram shows the final assembly stage, confirming all connections are tightened. The completed patio table is shown.
Status: Installation Completed.
