YITAHOME FTPLPB-K05-GY 5-Piece Patio Furniture Sectional Set Assembly Instructions
Contact Information
For questions regarding the installation of YITAHOME products, please call Monday to Friday (8:00 a.m - 5:00 p.m) at 888-717-8084 or email yitahome@outlook.com.
For Amazon.com orders, follow these steps: 1. Log into your Amazon account. 2. Go to your orders and find the purchase. 3. Click "Contact Seller".
General Assembly Tips
Important: Do not fully tighten screws during initial assembly. Fully tighten screws only once all pieces are correctly assembled.
LEFT CORNER CHAIR
Parts List
| Item No. | Description | Quantity |
|---|---|---|
| A | Left Arm | 1 |
| B | Seat Back | 1 |
| C | Seat Base | 1 |
| D | Side Panel | 1 |
| E | Leveling Foot | 4 |
| F | M6 X 55mm Socket Head Cap Screw | 9 |
| G | M6 X 35mm Socket Head Cap Screw | 2 |
| H | Nut | 9 |
| J | Flat Washer | 20 |
Assembly Steps
Step 1
Attach the Left Arm (A) to the Seat Back (B). Use 2x M6 X 55mm Socket Head Cap Screws (F) and 2x Nuts (H), with 4x Flat Washers (J) for these connections. Ensure screws pass through pre-drilled holes.
Step 2
Attach the Seat Base (C) to the assembled Left Arm (A) and Seat Back (B) frame. Use 5x M6 X 55mm Socket Head Cap Screws (F) and 5x Nuts (H), with 10x Flat Washers (J) for these connections.
Step 3
Attach the Side Panel (D) to the Seat Base (C) and Seat Back (B). Use 2x M6 X 55mm Socket Head Cap Screws (F), 2x Nuts (H), 2x M6 X 35mm Socket Head Cap Screws (G), and 6x Flat Washers (J) for these connections.
Step 4
Screw the 4x Leveling Feet (E) into the designated holes on the bottom of the assembled chair.
RIGHT CORNER CHAIR
Parts List
| Item No. | Description | Quantity |
|---|---|---|
| A-1 | Right Arm | 1 |
| B-1 | Seat Back | 1 |
| C-1 | Seat Base | 1 |
| D-1 | Side Panel | 1 |
| E | Leveling Foot | 4 |
| F | M6 X 55mm Socket Head Cap Screw | 9 |
| G | M6 X 35mm Socket Head Cap Screw | 2 |
| H | Nut | 9 |
| J | Flat Washer | 20 |
Assembly Steps
Step 1
Attach the Right Arm (A-1) to the Seat Back (B-1). Use 2x M6 X 55mm Socket Head Cap Screws (F) and 2x Nuts (H), with 4x Flat Washers (J) for these connections.
Step 2
Attach the Seat Base (C-1) to the assembled Right Arm (A-1) and Seat Back (B-1) frame. Use 5x M6 X 55mm Socket Head Cap Screws (F) and 5x Nuts (H), with 10x Flat Washers (J) for these connections.
Step 3
Attach the Side Panel (D-1) to the Seat Base (C-1) and Seat Back (B-1). Use 2x M6 X 55mm Socket Head Cap Screws (F), 2x Nuts (H), 2x M6 X 35mm Socket Head Cap Screws (G), and 6x Flat Washers (J) for these connections.
Step 4
Screw the 4x Leveling Feet (E) into the designated holes on the bottom of the assembled chair.
SINGLE ARMLESS CHAIR
Parts List
| Item No. | Description | Quantity |
|---|---|---|
| AA | Seat Back | 1 |
| B | Seat Base | 1 |
| C | Side Panel | 2 |
| E | Leveling Foot | 4 |
| F | M6 X 55mm Socket Head Cap Screw | 6 |
| G | M6 X 35mm Socket Head Cap Screw | 4 |
| H | Nut | 6 |
| J | Flat Washer | 16 |
Assembly Steps
Step 1
Attach the Seat Back (AA) to the Seat Base (B). Use 2x M6 X 55mm Socket Head Cap Screws (F) and 2x Nuts (H), with 4x Flat Washers (J) for these connections.
Step 2
Attach the two Side Panels (C) to the Seat Base (B) and Seat Back (AA). Use 4x M6 X 55mm Socket Head Cap Screws (F), 4x Nuts (H), 4x M6 X 35mm Socket Head Cap Screws (G), and 12x Flat Washers (J) for these connections.
Step 3
Screw the 4x Leveling Feet (E) into the designated holes on the bottom of the assembled chair.
OTTOMAN
Parts List
| Item No. | Description | Quantity |
|---|---|---|
| A-1 | Side Panels | 2 |
| B-1 | Front&Back Panel | 2 |
| C-1 | Table Top | 1 |
| E | Leveling Foot | 4 |
| G | M6 x 35mm Socket Head Cap Screw | 12 |
| J | Flat Washer | 12 |
Assembly Steps
Step 1
Assemble the frame of the ottoman. Attach the Side Panels (A-1) to the Front&Back Panels (B-1). Ensure boards with drilled holes are installed in the same direction. Use 8x M6 x 35mm Socket Head Cap Screws (G) and 8x Flat Washers (J) for these connections.
Step 2
Attach the Table Top (C-1) to the assembled frame. Use 4x M6 x 35mm Socket Head Cap Screws (G) and 4x Flat Washers (J) for these connections.
Step 3
Screw the 4x Leveling Feet (E) into the designated holes on the bottom of the assembled ottoman.
COFFEE TABLE
Parts List
| Item No. | Description | Quantity |
|---|---|---|
| A-2 | Side Panels | 2 |
| B-2 | Front&Back Panel | 2 |
| C-2 | Table Top | 1 |
| E | Leveling Foot | 4 |
| I | Glass Top | 1 |
| G | M6 x 35mm Socket Head Cap Screw | 12 |
| J | Flat Washer | 12 |
Assembly Steps
Step 1
Assemble the frame of the coffee table. Attach the Side Panels (A-2) to the Front&Back Panels (B-2). Ensure boards with drilled holes are installed in the same direction. Use 8x M6 x 35mm Socket Head Cap Screws (G) and 8x Flat Washers (J) for these connections.
Step 2
Attach the Table Top (C-2) to the assembled frame. Use 4x M6 x 35mm Socket Head Cap Screws (G) and 4x Flat Washers (J) for these connections.
Step 3
Screw the 4x Leveling Feet (E) into the designated holes on the bottom of the assembled table.
Step 4
Carefully place the Glass Top (I) onto the assembled table top.
