YITAHOME PYDD-V1 Patio Sectional Assembly Instructions
Model: PYDD-V1 | Part Number: FTPLPB-1037
Contact Information
For any questions regarding the installation of YITAHOME® products, please contact customer service:
- Phone: +1(888)-717-8084 (Monday-Friday 8:00 AM - 4:30 PM PST / Saturday 8:00 AM - 12:00 PM PST)
- Email: after-sale.cs@hotmail.com
For orders placed on amazon.com, you can also contact the seller through your Amazon account:
- Log in to your Amazon account.
- Navigate to "Your Orders" and locate the purchase.
- Click on "Contact Seller".
Important Notice
- Follow the installation instructions carefully. Ensure all accessories are present before beginning assembly.
- Do not fully tighten screws during the initial assembly phase. Tighten all screws securely only after all components are correctly assembled.
- If you encounter any issues during assembly, please refer to the installation video tutorial available on the product's Amazon page or contact customer service.
Parts List
Item No. | Reference Image | Quantity | Item No. | Reference Image | Quantity |
---|---|---|---|---|---|
A | [Screw M6x12] |
x32 | D | [Hex Wrench] |
x1 |
B | [Screw M6x35] |
x8 | E | [Clip] |
x2 |
C | [Screw M6x20] |
x2 |
Item No. | Reference Image | Quantity | Item No. | Reference Image | Quantity |
---|---|---|---|---|---|
1 | [Seat Cushion] |
x3 | 5 | [Left Armrest Frame] |
x1 |
2 | [Back Cushion] |
x2 | 6 | [Right Armrest Frame] |
x1 |
3 | [Side Table Top] |
x1 | 7 | [Left Seat Frame] |
x1 |
4 | [Side Table Leg] |
x1 | 8 | [Right Seat Frame] |
x1 |
9 | [Washer] |
x8 |
Assembly Steps
Step 1
Attach part 5 (Left Armrest Frame) and part 7 (Left Seat Frame) using screws B (x3) and washers 9 (x1). Ensure to use 3 pieces of B and 1 piece of 9.
Step 2
Attach part 9 (Washers) and screws A (x16) to connect the seat frames. Use 1 piece of C and 4 pieces of 9.
Step 3
Connect part 8 (Right Seat Frame) and part 6 (Right Armrest Frame) using screws B (x3) and washers 9 (x1). Ensure to use 3 pieces of B and 1 piece of 9.
Step 4
Attach part 9 (Washers) and screws A (x16) to connect the seat frames. Use 1 piece of C and 4 pieces of 9.
Step 5
Connect part 1 (Seat Cushions) and part 2 (Back Cushions) to the assembled frame. Use 2 pieces of E (Clips).
Step 6
Attach the side table components. Use screws B (x2).
Step 7
Place part 3 (Side Table Top) and part 4 (Side Table Leg) onto the assembled sectional.
Step 8
Final check: Ensure all cushions (1 and 2) are properly placed. Installation is complete.
Diagram Descriptions
The document contains several diagrams illustrating the assembly process. These include:
- A diagram showing the overall patio sectional with a side table and ottoman.
- Exploded views of Part 1 (likely the seating frame) and Part 2 (likely the backrest and armrests).
- Detailed steps showing how to connect various parts using screws, washers, and an Allen wrench. Specific parts are labeled with numbers and letters corresponding to the parts list.
- A final diagram showing the completed assembly with cushions in place.