ASSEMBLY INSTRUCTIONS
Model: JMJC-V1
Compatible Models: FTPLPB-1085, FTPLPB-1086
Important Notice ?
- Follow the installation instructions carefully. Please confirm all accessories are present before installation.
- Do not fully tighten screws during initial assembly. Fully tighten screws only once all pieces are correctly assembled.
- If you encounter any problems during installation, refer to the installation video tutorial on the product page or contact customer service.
Parts List
| Item No. | Description | Quantity |
|---|---|---|
| A | M6x18 Screw ? | 4 |
| B | M6x30 Screw ? | 18 |
| - | Allen Wrench ? | 2 |
| 1 | Curved Frame Panel | 1 |
| 2 | Curved Frame Panel | 1 |
| 3 | Curved Frame Panel | 1 |
| 4 | Curved Frame Panel | 1 |
| 5 | Seat/Base Panel | 1 |
| 6 | Support Leg | 2 |
| 7 | Anti-slip Pad | 2 |
| 8 | Main Cushion ?️ | 1 |
| 9 | Back Cushion ?️ | 1 |
| 10 | Side Cushion ?️ | 2 |
| 11 | Top Cushion ?️ | 1 |
Assembly Steps ⚙️
Step 1
Connect the four curved frame panels (1, 2, 3, 4) to form the main spherical structure. Attach the seat/base panel (5) and the two support legs (6) to the bottom of the frame. Secure all these components using the M6x30 screws (B) and the provided Allen wrench. (Refer to diagram on page 3).
- Parts used: 1, 2, 3, 4, 5, 6
- Fasteners: M6x30 screws (B)
Step 2
Continue assembling the spherical frame by attaching the remaining curved panels (1, 2, 3, 4) to the structure. Use M6x30 screws (B). (Refer to diagram on page 4).
- Parts used: 1, 2, 3, 4
- Fasteners: M6x30 screws (B)
Step 3
Attach the seat/base panel (5) and support legs (6) to the main frame. Use M6x30 screws (B). (Refer to diagram on page 4).
- Parts used: 5, 6
- Fasteners: M6x30 screws (B)
Step 4
Attach the support legs (6) to the main structure using M6x18 screws (A). Affix the anti-slip pads (7) to the bottom of the support legs (6). (Refer to diagram on page 5).
- Parts used: 6, 7
- Fasteners: M6x18 screws (A)
Step 5
Remove the protective cover from the anti-slip pads (7) and affix them to the base (6). (Refer to diagram on page 5).
- Parts used: 6, 7
Step 6
Place the main cushion (8) and back cushion (9) inside the assembled chair. (Refer to diagram on page 6).
- Parts used: 8, 9
Step 7
Place the side cushions (10) and the top cushion (11) inside the assembled chair. (Refer to diagram on page 6).
- Parts used: 10, 11
Contact Information
For any questions regarding installation of YITAHOME products, please contact:
Phone: +1 (888) 717-8084 (Mon-Fri 8:00 AM - 4:30 PM PST / Saturday 8:00 AM - 12:00 PM PST)
Email: after-sale.cs@hotmail.com
Alternative contact for Amazon.com orders: Log into your Amazon account, go to "Your Orders", find the purchase, and click "Contact Seller".
