YITAHOME 4-Piece Outdoor Patio Furniture Set
Assembly Instructions
Model Numbers: FTPLPB-K04-L-BK, FTPLPB-K04-L-BN
Contact Us
For questions about the installation of YITAHOME products, please contact us at +1 (888) 717-8084 from Mon-Fri 8:00 AM-4:30 PM PST / Sat. 8:00 AM-12:00 PM PST, or email us at after-sale.cs@hotmail.com.
Alternative method for Amazon.com orders only: Log into your Amazon account, go to "Your Orders" and find the purchase, then click on "Contact Seller".
General Assembly Tips
Ensure that all screws are placed in correct positions prior to tightening. If a screw cannot be inserted, loosen it and try again. Once all screws are aligned and inserted, tighten them in a crisscross pattern.
Parts List
Single Armchair Components (x2)
- A1: Armchair Frame Side (X2)
- A2: Armchair Frame Back (X2)
- B1: Armchair Frame Seat (X2)
- C1: Armchair Frame Base (X2)
- D1: Seat Cushion (X2)
- E1: Seat Cushion (X2)
- F1: Back Cushion (X2)
Loveseat Components (x1)
- A1: Loveseat Frame Side (X1)
- A2: Loveseat Frame Back (X1)
- B2: Loveseat Frame Seat (X1)
- C2: Loveseat Frame Base (X1)
- D2: Loveseat Frame Back (X1)
- E2: Seat Cushion (X1)
- F2: Back Cushion (X2)
- G: Pillow (X2)
Coffee Table Components (x1)
- H: Table Leg (X2)
- I: Table Frame (X1)
- J: Table Top (X1)
Hardware & Tools
- L: Bolt (Total X18)
- M: Screw M6x35mm (Total X28)
- N: Screw M6x30mm (Total X20)
- O: Washer/Nut (Total X48)
- Q: Allen Wrench (Total X6)
- P: Assembly Tool (Total X1)
Assembly Steps
Single Armchair Assembly
Step 1
Attach Armchair Frame Sides (A1, X2) to Armchair Frame Base (C1, X2) using Bolts (L, X4) and Washers/Nuts (O, X4). Use Allen Wrench (Q).
Step 2
Attach Armchair Frame Back (A2, X2) and Armchair Frame Seat (B1, X2) to the assembled base and sides using Screws (M, X4) and Washers/Nuts (O, X4). Use Allen Wrench (Q).
Step 3
Attach Armchair Frame Sides (A1, X2) to Armchair Frame Back (A2, X2) and Armchair Frame Seat (B1, X2) using Screws (M, X4) and Washers/Nuts (O, X4). Use Allen Wrench (Q).
Step 4
Attach Armchair Frame Base (C1, X2) to Armchair Frame Seat (B1, X2) using Screws (M, X10) and Washers/Nuts (O, X10). Use Allen Wrench (Q).
Step 5
Attach Seat Cushions (D1, X2) using Screws (N, X8) and Washers/Nuts (O, X8).
Step 6
Secure the frame using Bolts (L, X8).
Step 7
Place Seat Cushions (E1, X2) and Back Cushions (F1, X2) onto the assembled armchair. Installation Completed.
Loveseat Assembly
Step 1
Attach Loveseat Frame Side (A1, X1) to Loveseat Frame Base (C2, X1) using Allen Wrench (Q, X2).
Step 2
Attach Loveseat Frame Back (A2, X1) to the assembled base and side using Screws (M, X2) and Washers/Nuts (O, X2). Use Allen Wrench (Q).
Step 3
Attach Loveseat Frame Side (A1, X1) to Loveseat Frame Back (A2, X1) using Screws (M, X2) and Washers/Nuts (O, X2). Use Allen Wrench (Q).
Step 4
Attach Loveseat Frame Seat (B2, X1) to the frame using Screws (M, X6) and Washers/Nuts (O, X6). Use Allen Wrench (Q).
Step 5
Attach Loveseat Frame Back (D2, X1) to the frame using Screws (N, X6) and Washers/Nuts (O, X6). Use Allen Wrench (Q).
Step 6
Secure the frame using Bolts (L, X6).
Step 7
Place Seat Cushion (E2, X1), Back Cushions (F2, X2), and Pillows (G, X2) onto the assembled loveseat. Installation Completed.
Coffee Table Assembly
Step 1
Attach Table Legs (H, X2) to the Coffee Table Frame (I, X1) using Bolts (L, X4) and Washers/Nuts (O, X6).
Step 2
Attach the frame assembly to the table structure using Screws (N, X6) and Washers/Nuts (O, X6).
Step 3
Place the Coffee Table Top (J, X1) onto the assembled frame. Installation Completed.
