Hikvision DS-PDP15P-EG2-WE Wireless PIR Detector

1. APPEARANCE

The detector has the following components:

• 1. Indicator
• 2. Bracket Tamper Port
• 3. Battery
• 4. Tamper Switch
• 5. Power Switch

2. ENROLLMENT

Scan the QR code for more information and operation help.

3. INSTALLATION

Follow these steps for installation:

1. Check the signal strength.
2. Install the device.
3. (Optional) Install the device with bracket.

Mounting methods:

• a. Mount the detector with screws.
• b. Mount the detector with sponge tape.

4. TEST

Perform signal strength tests and other operational checks.

Detection Range: 15m, 85.9°

Auto Sensitivity: Yes

Pet Immunity: Up to 30Kg (Height < 40cm)

Tamper Protection: Front & Back

LED Indicator: Blue (alarm)

Specifications

Compliance Information

This product is marked with "CE" and complies with applicable harmonized European standards under the RE Directive 2014/53/EU, EMC Directive 2014/30/EU, and RoHS Directive 2011/65/EU.

WEEE Directive 2012/19/EU: Products marked with this symbol must not be disposed of as unsorted municipal waste in the EU. Return to local supplier or designated collection points for proper recycling. More info: www.recyclethis.info

Battery Directive 2006/66/EC: This product contains a battery that must not be disposed of as unsorted municipal waste in the EU. See product documentation for battery specifics. Battery marking may include symbols for Cadmium (Cd), Lead (Pb), or Mercury (Hg). Return to supplier or designated collection point for proper recycling. More info: www.recyclethis.info

Safety Precautions

Battery Caution

• Do not swallow the battery.
• Keep new and used batteries away from children.
• Seek immediate medical attention if batteries are swallowed or placed inside the body.
• Risk of explosion if battery is replaced by an incorrect type.
• Dispose of used batteries according to instructions and local regulations.
• If the battery compartment does not close securely, stop using the product and keep it away from children.

Installation Caution

The additional force should be equal to three times the weight of the equipment, but not less than 50N. The equipment and its associated mounting means shall remain secure during installation. After installation, the equipment, including any associated mounting plate, shall not be damaged.