HOMCOM 834-730V00 Under Sink Bathroom Cabinet
Model: IN240600283V02_GL
Estimated Assembly Time: ⏱️ 90 MIN
Total Steps: 12 STEPS ?♂️?♀️
Important Information
EN: IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
FR: IMPORTANT : À LIRE ATTENTIVEMENT ET À CONSERVER POUR VOUS Y RÉFÉRER ULTÉRIEUREMENT.
ES: IMPORTANTE, LEA DETENIDAMENTE Y GUARDE PARA FUTURAS REFERENCIAS.
PT: IMPORTANTE, GUARDE PARA FUTURA REFERÊNCIA, LEIA ATENTAMENTE.
DE: WICHTIG! SORGFÄLTIG LESEN UND FÜR SPÄTERES NACHSCHLAGEN AUFBEWAHREN.
IT: IMPORTANTE, LEGGERE E CONSERVARE QUESTO MANUALE D'ISTRUZIONE PER UN USO FUTURO.
Please read all instructions carefully before assembly. Ensure all parts and hardware are present before starting. Tools required: Screwdriver ?, Wrench ?️.
Assembly Notes
Quickfit Assembly: Tighten quickfit until shoulder is flush with panel. Do not overtighten or undertighten. (Visual: Screw being tightened into a panel.)
Cam Lock Assembly: When fitting cam lock, ensure starting position is correct before you insert connecting quickfit. (Visual: Cam lock mechanism.)
Alignment: The quickfit head should be in the centre of the cam lock when the two panels are joined. The cam lock should be inserted before the quickfit. (Visual: Diagram showing alignment of cam lock and quickfit.)
Tightening: Turn cam lock clockwise ➡️ to tighten.
Parts List
| Part No. | Description | Quantity |
|---|---|---|
| 1 | U-shaped top panel | 1 pc |
| 2 | Main cabinet base panel | 1 pc |
| 3 | Left side panel | 1 pc |
| 4 | Right side panel | 1 pc |
| 5 | Middle shelf panel | 1 pc |
| 6 | Back panel (upper) | 1 pc |
| 7 | Back panel (lower) | 1 pc |
| 8 | Drawer front panel | 1 pc |
| 9 | Left door panel | 1 pc |
| 10 | Right door panel | 1 pc |
| 11 | Cabinet feet/legs | 4 pcs |
Hardware List
| ID | Description | Quantity |
|---|---|---|
| A | L-shaped bracket | 1 pc |
| B | Screw (M4*16mm) | 12 pcs + 1 spare |
| C | Cam bolt (Ø6*30mm) | 8 pcs |
| D1 | Door handle | 2 pcs |
| D2 | Screw (M4*18mm) | 4 pcs |
| E | Screw (M4*18mm) | 4 pcs |
| F1 | Cam lock | 8 pcs + 1 spare |
| F2 | Cam lock housing | 8 pcs |
| G | Dowel (Ø8mm) | 4 pcs |
| H | Screw (Ø6xM3x12mm) | 4 pcs + 1 spare |
| I | Metal connecting plate | 4 pcs |
| J1 | Hinge | 1 pc |
| J2 | Hinge plate | 2 pcs |
| K | Screw (Ø6xM3x16mm) | 13 pcs + 1 spare |
| L | Screw (Ø6xM3x16mm) | 10 pcs + 1 spare |
| M | Support rod | 1 pc |
Assembly Steps
Step 1
Attach the main cabinet base panel (2) to the left side panel (3) and right side panel (4) using screws (B) and metal connecting plates (I). Secure the cabinet feet (11) to the base panel.
Visual: Shows panels 2, 3, 4, and feet 11 being joined with screws B and plates I.
Step 2
Connect the left side panel (3) and right side panel (4) to the middle shelf panel (5) using cam locks (F1) and hinges (J1). Secure with screws (K).
Visual: Shows panels 3, 4, 5 being assembled. Includes a checkmark ✔️ for correct assembly and a cross ❌ for incorrect.
Step 3
Join the right side panel (4) and middle shelf panel (5) using cam bolts (C) and cam lock housings (F2).
Visual: Close-up of cam bolt C and cam lock housing F2 connecting panels 4 and 5.
Step 4
Join the left side panel (3) and middle shelf panel (5) using cam bolts (C) and cam lock housings (F2).
Visual: Close-up of cam bolt C and cam lock housing F2 connecting panels 3 and 5.
Step 5
Attach the main cabinet base panel (2) to the left side panel (3) and right side panel (4) using screws (B) and the L-shaped bracket (A).
Visual: Shows panels 2, 3, 4 being joined with screws B and bracket A.
Step 6
Insert the support rod (M) into the left side panel (3). Slide the upper back panel (6) and lower back panel (7) into place.
Visual: Shows rod M being inserted and back panels 6 and 7 being slid into grooves.
Step 7
Attach the U-shaped top panel (1) to the assembled structure. Use cam bolts (C), cam locks (F1), and cam lock housings (F2) for secure attachment.
Visual: Shows top panel 1 being placed and secured with hardware C, F1, F2.
Step 8
Secure the back panels (6, 7) to the main structure using screws (K) and (L).
Visual: Shows screws K and L being used to attach back panels 6 and 7.
Step 9
Attach the drawer front panel (8) to the cabinet structure. Note the warning icon ⚠️ indicating careful alignment is needed.
Visual: Shows drawer front 8 being attached. Includes a warning icon.
Step 10
Prepare the doors (9, 10) by attaching handles (D1) with screws (D2). Attach hinge plates (J2) to the doors with screws (H). Insert dowels (G) into the cabinet structure.
Visual: Shows handles D1 attached to doors 9, 10 with screws D2. Hinge plates J2 attached with screws H. Dowels G inserted.
Step 11
Attach the doors (9, 10) to the cabinet by connecting the hinges to the hinge plates. (Visual: Close-up of hinge mechanism connecting to hinge plate).
Visual: Shows doors 9 and 10 being attached to the cabinet body via hinges.
Step 12
Final assembly complete. The under sink cabinet is ready for use.
Visual: Shows the fully assembled under sink cabinet with doors closed and open.
Contact Information
United States (US)
Customer Care Center: 001-877-644-9366
Email: customerservice@aosom.com
Imported by: Aosom LLC
Address: 27150 SW Kinsman Rd Wilsonville, OR 97070 USA
Made in China
Canada (CA)
Customer Care Center: 416-792-6088
Email: customerservice@aosom.ca
Imported by: Aosom Canada Inc.
Address: 7270 Woodbine Avenue, Unit 307, Markham, Ontario Canada L3R 4B9
Made in China
France (FR)
Assistance Clientèle: 0033-1-84166106
Email: aosom@mhfrance.fr
Importé par/Fabricant/REP: MH FRANCE
Address: 2 Rue Maurice Hartmann, 92130 Issy Les Moulineaux, France
Fabriqué en Chine
Germany (DE)
Kundendienstzentrum: +49 40 87408465
Email: service@aosom.de
Hersteller/REP: MH Handel GmbH
Address: Wendenstraße 309, D-20537 Hamburg, Germany
Hergestellt in China
Italy (IT)
Centro Assistenza Clienti: 0039-0249471447
Email: clienti@aosom.it
Importato da/Produttore/REP: AOSOM Italy srl
Address: Centro Direzionale Milanofiori, Strada 1 Palazzo F1, 20057 Assago (MI)
Fatto in Cina
Spain (ES)
Centro de Atención al Cliente: 0034-931294512
Email: atencioncliente@aosom.es
Importador/Fabricante/REP: SPANISH AOSOM, S.L.
Address: C/ROC GROS,N°15.08550, ELS HOSTALETS DE BALENYÀ, SPAIN.
Hecho en China
United Kingdom (UK)
Customer Care Center: 0044-800-240-4004
Email: enquiries@mhstar.co.uk
Importer Address: MH STAR UK LTD
Address: Unit 27, Perivale Park, Horsenden lane South, Perivale, UB6 7RH
Made in China
Portugal (PT)
Centro de Atendimento ao Cliente: 0034-931294512
Email: info@aosom.pt
Importador/Fabricante/REP: SPANISH AOSOM, S.L
Address: C.ROC GROS N.15, 08550. ELS HOSTALETS DE BALENYÀ
Feito na China
Recycling Information: ♻️ Please dispose of packaging responsibly. Visit quefairedemesdechets.fr for disposal addresses.
