Power Supply Connection Overview
This document provides instructions for connecting the power supply cable to the GEWISS JOINON WALLBOX I-CON unit. The Wallbox features two main terminal blocks for power distribution.
The primary function described across multiple languages is the connection of the power supply cable to the Wallbox, detailing how the electronic board and the main unit receive power.
Diagram Description: Power Supply Connections
The accompanying diagram illustrates the internal terminal layout for connecting the power supply. It shows two main configurations: "2P+÷" and "3P+N+÷".
Within the Wallbox, there are two distinct terminal blocks:
- Terminal Block 1: Designated for the 'Electronic board power supply' (or equivalent in other languages).
- Terminal Block 2: Designated for the 'Main power supply'.
The diagram visually represents the connection points for the power conductors: L1 (Phase 1), N (Neutral), and PE (Protective Earth).
Two alternative methods are presented for powering the electronic board:
- Method A: Via a dedicated line, which allows for a potential power supply from an Uninterruptible Power Supply (UPS).
- Method B: By taking the L1 and N connections directly from the main power supply.
Connecting the Power Supply Cable (English)
The Wallbox is equipped with 2 terminal blocks:
- Electronic board power supply
- Main power supply
The electronic board can be powered in two different ways:
- Via an allocated line allowing a possible power supply from the UPS.
- Taking L1 and N from the main power supply.
Contact and Support Information
For contact details in accordance with applicable European Directives and Regulations:
Company: GEWISS S.p.A.
Address: Via A.Volta, 1 IT-24069 Cenate Sotto (BG) Italy
Telephone: +39 035 946 111
Email: qualitymarks@gewiss.com
Customer Support (SAT):
Hours: 8:30 - 12:30 / 14:00 - 18:00 Monday to Friday
Telephone: +39 035 946 260
Email: sat@gewiss.com
Website: www.gewiss.com
Document Revision: ULTIMA REVISIONE 04/2021
Product Code: cod. 7.55.4.531.9
